Carbide indexable insert TCGT090204-AH-A, polished
€5.00*
Prices incl. 19% VAT. plus Shipping costs
Delivery time: 1-3 working days **
More than 10 pieces available (online and in specialist shops)
Intended use
Indexable inserts are used in machining and are mounted on the turning tools or milling cutters intended for this purpose. Depending on the intended use or the material to be machined, inserts are available in various shapes and with special coatings. For example, there are special inserts for machining aluminium or non-ferrous metals. The inserts are standardised and can be identified by the respective standard designation. If a cutting insert is worn, it is simply replaced with a new insert.
Technical data
| Areas of application: | Chamfering, Facing, Internal boring, Longitudinal turning |
|---|---|
| Clearance angle [°]: | 7 |
| Cutting edge radius [mm]: | 0,4 |
| Point angle [°]: | 60 |
| Standard designation: | TCGT090204-AH-A |
| Surface: | Ground and polished |
Carbide insert polished and ground, resulting in an extremely sharp cutting edge
Sintered chip breakers for excellent chip breaking
Highly positive geometry
For machining aluminium, non-ferrous metals, cast iron
For the extended range of applications with wood, plastic, refractory, steel and stainless materials
Description of the
The advantages and properties of this polished insert:
The highly positive geometry in combination with the sharply ground cutting edges and the sintered chip breakers enable excellent machining of aluminium and non-ferrous metals such as brass, copper, bronze, etc.
Thanks to these geometric properties, particularly good surface results can be achieved. The highly positive geometry reduces the formation of a so-called built-up edge when machining aluminium. Very good results can also be achieved when machining both cast iron and plastics.
Scope of delivery
- 1 x TCGT090204-AH-A carbide indexable insert
More about the brand and products from
The advantages and properties of this polished insert:
The highly positive geometry in combination with the sharply ground cutting edges and the sintered chip breakers enable excellent machining of aluminium and non-ferrous metals such as brass, copper, bronze, etc.
Thanks to these geometric properties, particularly good surface results can be achieved. The highly positive geometry reduces the formation of a so-called built-up edge when machining aluminium. Very good results can also be achieved when machining both cast iron and plastics.
This cutting insert is made of sintered carbide. In contrast to HSS tools, the high temperature resistance of carbide allows higher cutting speeds. In addition, this insert is titanium nitride-coated, which contributes to greater heat resistance and tool life. TiN-coated inserts are intended for universal use. This means that soft materials can be machined in the same way as hard materials.
The advantages and properties of the titanium-aluminium-nitrogen coating (TiAlN coating):
The TiAlN coating is an all-round coating that is suitable for universal use. It allows the machining of hard materials such as steel, stainless steel or titanium alloys. Another advantage of this insert is that the use of cooling lubricant is not absolutely necessary. However, the use of coolant generally increases the service life of the insert.
The advantages and properties of this polished insert:
The highly positive geometry in combination with the sharply ground cutting edges and the sintered chip breakers enable excellent machining of aluminium and non-ferrous metals such as brass, copper, bronze, etc.
Thanks to these geometric properties, particularly good surface results can be achieved. The highly positive geometry reduces the formation of a so-called built-up edge when machining aluminium. Very good results can also be achieved when machining both cast iron and plastics.
This cutting insert is made of sintered carbide. In contrast to HSS tools, the high temperature resistance of carbide allows higher cutting speeds. In addition, this insert is titanium nitride-coated, which contributes to greater heat resistance and tool life. TiN-coated inserts are intended for universal use. This means that soft materials can be machined in the same way as hard materials.
The advantages and properties of the titanium-aluminium-nitrogen coating (TiAlN coating):
The TiAlN coating is an all-round coating that is suitable for universal use. It allows the machining of hard materials such as steel, stainless steel or titanium alloys. Another advantage of this insert is that the use of cooling lubricant is not absolutely necessary. However, the use of coolant generally increases the service life of the insert.
€5.00*
Content: 1 pcs
€40.50*
Content: 1 pcs
€45.00*
Content: 1 pcs
€45.00*
Content: 1 pcs
€4.50*
Content: 1 pcs
€5.00*
Content: 1 pcs
18 April 2024 19:08
Gutes Produkt-Leistungsverhältnis.
Gutes Produkt-Leistungsverhältnis.
4 January 2023 11:02
Pflicht bei einer kleinen Maschine (c2) und
Pflicht bei einer kleinen Maschine (c2) und NE-Bearbeitung ! Weniger Druck, besserer Span incl. Oberfläche.
27 January 2022 00:00
Gutes Werkzeug
Die Wendeschneitplatte ist für mein Einsatzgebiet sehr gut geeignet
26 January 2022 00:00
Sehr gute Drehqulität
Ober Flächen werden Sehr sauber
7 December 2021 00:00
1A Qualität
Schnelle Lieferung, Top Qualität, Preis Ok, es macht Spaß damit zu arbeiten! Es war sicher nicht meine letzte Bestellung.
18 June 2021 00:00
Looks OK. Fits perfectly in toolhoder. Not used sofar, so quality is TBD
Visually OK. Not used sofar, so performance/quality is TBD.
17 May 2021 00:00
Wie immer schnell geliefert…
Wie immer schnell geliefert… Ich habe die Schneidplatten noch nicht probiert aber mache mir auch keine Sorgen. Werkzeug von Paulimot war bisher immer 100-prozentig ?????
25 April 2021 00:00
Super
Für Aluminium und Messing sehr gut geeignet.
30 March 2021 00:00
sehr scharfe Wendeplatte, ideal für Aluminium
Ideal zum zerspanen von Aluminium!
3 March 2021 00:00
Sehr gut
Sehr gut super Preis 1A Paulimot-Qualität. Danke gerne wieder.