Carbide indexable insert TCGT110204-AK-A, polished
€5.00*
Prices incl. 19% VAT. plus Shipping costs
Delivery time: 1-3 working days **
More than 10 pieces available (online and in specialist shops)
Intended use
Indexable inserts are used in machining and are mounted on the turning tools or milling cutters intended for this purpose. Depending on the intended use or the material to be machined, inserts are available in various shapes and with special coatings. For example, there are special inserts for machining aluminium or non-ferrous metals. The inserts are standardised and can be identified by the respective standard designation. If a cutting insert is worn, it is simply replaced with a new insert.
Technical data
| Areas of application: | Chamfering, Facing, Internal boring, Longitudinal turning |
|---|---|
| Clearance angle [°]: | 7 |
| Cutting edge radius [mm]: | 0,4 |
| Point angle [°]: | 60 |
| Standard designation: | TCGT110204-AK-A |
| Surface: | Ground and polished |
Carbide insert polished and ground, resulting in an extremely sharp cutting edge
Sintered chip breakers for excellent chip breaking
Highly positive geometry
For machining aluminium, non-ferrous metals, cast iron
For the extended range of applications with wood, plastic, refractory, steel and stainless materials
Description of the
The advantages and properties of this polished insert:
The highly positive geometry in combination with the sharply ground cutting edges and the sintered chip breakers enable excellent machining of aluminium and non-ferrous metals such as brass, copper, bronze, etc.
Thanks to these geometric properties, particularly good surface results can be achieved. The highly positive geometry reduces the formation of a so-called built-up edge when machining aluminium. Very good results can also be achieved when machining both cast iron and plastics.
Scope of delivery
- 1 x TCGT110204-AK-A carbide indexable insert
More about the brand and products from
The advantages and properties of this polished insert:
The highly positive geometry in combination with the sharply ground cutting edges and the sintered chip breakers enable excellent machining of aluminium and non-ferrous metals such as brass, copper, bronze, etc.
Thanks to these geometric properties, particularly good surface results can be achieved. The highly positive geometry reduces the formation of a so-called built-up edge when machining aluminium. Very good results can also be achieved when machining both cast iron and plastics.
This cutting insert is made of sintered carbide. In contrast to HSS tools, the high temperature resistance of carbide allows higher cutting speeds. In addition, this insert is titanium nitride-coated, which contributes to greater heat resistance and tool life. TiN-coated inserts are intended for universal use. This means that soft materials can be machined in the same way as hard materials.
The advantages and properties of the titanium-aluminium-nitrogen coating (TiAlN coating):
The TiAlN coating is an all-round coating that is suitable for universal use. It allows the machining of hard materials such as steel, stainless steel or titanium alloys. Another advantage of this insert is that the use of cooling lubricant is not absolutely necessary. However, the use of coolant generally increases the service life of the insert.
The advantages and properties of this polished insert:
The highly positive geometry in combination with the sharply ground cutting edges and the sintered chip breakers enable excellent machining of aluminium and non-ferrous metals such as brass, copper, bronze, etc.
Thanks to these geometric properties, particularly good surface results can be achieved. The highly positive geometry reduces the formation of a so-called built-up edge when machining aluminium. Very good results can also be achieved when machining both cast iron and plastics.
This cutting insert is made of sintered carbide. In contrast to HSS tools, the high temperature resistance of carbide allows higher cutting speeds. In addition, this insert is titanium nitride-coated, which contributes to greater heat resistance and tool life. TiN-coated inserts are intended for universal use. This means that soft materials can be machined in the same way as hard materials.
The advantages and properties of the titanium-aluminium-nitrogen coating (TiAlN coating):
The TiAlN coating is an all-round coating that is suitable for universal use. It allows the machining of hard materials such as steel, stainless steel or titanium alloys. Another advantage of this insert is that the use of cooling lubricant is not absolutely necessary. However, the use of coolant generally increases the service life of the insert.
€5.00*
Content: 1 pcs
€40.50*
Content: 1 pcs
€45.00*
Content: 1 pcs
€45.00*
Content: 1 pcs
€4.50*
Content: 1 pcs
€5.00*
Content: 1 pcs
19 April 2025 07:55
Macht einen guten Eindruck. War bis jetzt
Macht einen guten Eindruck. War bis jetzt noch nicht im Einsatz.
6 January 2025 20:22
Top Platte
Sehr gute Wendeschneidplatte, Preis - Leistung passt hier sehr gut.
25 December 2024 17:00
Preis/Leistungsverhältnis optimal!
Preis/Leistungsverhältnis optimal!
25 July 2024 10:11
alles super, und schnelle Lieferung
alles super, und schnelle Lieferung
18 March 2023 08:35
Gute Qualität
Gute Qualität
27 January 2023 18:32
Ich bestelle die immer über paulimot. Preis-/Leistung
Ich bestelle die immer über paulimot. Preis-/Leistung stimmt, schnelle Lieferung und alles sehr unkompliziert. Und danke für die tollen Taschen paulimot 👍🏻
22 November 2022 10:55
welche ist welche
Habe die Platte noch nicht getestet,aber ein Tip an Paulimot bitte in die Verpackung (Tütchen) einen Zettel beilegen um welche Platte es sich handelt. Da ich 2 verschiedene bestellt habe weiß ich nun nicht welche welche ist. Muß nun anhand von Farbe (beide dunkel) oder durch Testen dies herausfinden.
22 September 2022 13:31
Wende Platte
Gute Qalität
6 August 2022 08:54
Überraschend hohe Güte der Oberfläche
Top Schneidplatten! Da ich viel mit Alu arbeite, war ich überrascht, wie supergut die Oberfläche der Drehteile ausfällt. Ich hatte vorher die üblichen Wendeschneidplatten im Meissel, da war die Oberfläche lange nicht so glatt!