Centre drill 1.0 mm HSS
€2.00*
Prices incl. 19% VAT. plus Shipping costs
Delivery time: 1-3 working days **
More than 10 pieces available (online and in specialist shops)
Intended use
A centre drill is used to create a centre point on workpieces. This centre hole allows, for example, a centre point to be used to support the workpiece via the tailstock of a lathe. A centre drill can also be used for pre-drilling. Due to the small size of the centre point on the drill, only minor radial forces and reaction forces caused by the chip are generated when starting to drill a workpiece. This reduces the likelihood of the drill ‘running off course’, thereby significantly improving the positional accuracy of the hole to be drilled. The actual hole can then be drilled using a twist drill, which is guided laterally from the outset by the centring hole. Centre drills are particularly short and have a stepped profile, featuring an additional centre point at the very front. The diameter of this point is also the nominal diameter of the centre drill.
Technical data
| Nominal diameter [mm]: | 1,0 |
|---|---|
| Total length [mm]: | 31 |
| Ø shaft [mm]: | 3 |
| Material: | HSS |
Drill bit suitable for use on both sides
Made from HSS steel
Nominal diameter: 1.0 mm
Shank diameter: 3 mm
Description of the
This centre drill has a nominal diameter of 1.0 mm. The drill bit is made of HSS steel and can be used on both sides.
Scope of delivery
- 1 x 1.0 mm HSS centre drill
More about the brand and products from
This centre drill has a nominal diameter of 1.0 mm. The drill bit is made of HSS steel and can be used on both sides.
This centre drill has a nominal diameter of 1.25 mm. The drill bit is made of HSS steel and can be used on both sides.
This centre drill has a nominal diameter of 1.6 mm. The drill bit is made of HSS steel and can be used on both sides.
This centre drill has a nominal diameter of 2.0 mm. The drill bit is made of HSS steel and can be used on both sides.
This centre drill has a nominal diameter of 2.5 mm. The drill bit is made of HSS steel and can be used on both sides.
This centre drill has a nominal diameter of 3.15 mm. The drill bit is made of HSS steel and can be used on both sides.
This centre drill has a nominal diameter of 4.0 mm. The drill bit is made of HSS steel and can be used on both sides.
This centre drill has a nominal diameter of 5.0 mm. The drill bit is made of HSS steel and can be used on both sides.
This centre drill has a nominal diameter of 6.3 mm. The drill bit is made of HSS steel and can be used on both sides.
This centre drill has a nominal diameter of 8.0 mm. The drill bit is made of HSS steel and can be used on both sides.
This centre drill has a nominal diameter of 10.0 mm. The drill bit is made of HSS steel and can be used on both sides.
€2.00*
Contents: 1 pcs
€2.00*
Contents: 1 pcs
€2.00*
Contents: 1 pcs
€2.00*
Contents: 1 pcs
€2.50*
Contents: 1 pcs
€2.50*
Contents: 1 pcs
€3.50*
Contents: 1 pcs
€5.00*
Contents: 1 pcs
€7.00*
Contents: 1 pcs
€11.50*
Contents: 1 pcs
€17.90*
Contents: 1 pcs
16 February 2023 09:18
Alles gut
Alles gut
4 April 2022 10:18
Bohrer haben haben einwandfreien Anschliff zum guten
Bohrer haben haben einwandfreien Anschliff zum guten Preis.
18 October 2021 00:00
Top Qualität
Bin sehr zufrieden
18 April 2021 00:00
Ist halt ein Zentrierbohrer
Qualität top und Versand schnell
4 February 2021 00:00
gute Qualität
tja, wie soll man denn nun einen Zentrierbohrer bewerten? Ich würde mal sagen, er erledigt seinen Zweck in vollem Umfang. Und wenn er dann stumpf ist, kaufe ich einen neuen :-)
1 January 2021 00:00
Zentrierbohrer 1 mm
Artikel ist gut
20 November 2020 00:00
Bohrer
o.k.
21 May 2020 00:00
Anbohren
Gute Qualität