Centre drill 1.0 mm TiN-coated
€2.50*
Prices incl. 19% VAT. plus Shipping costs
Delivery time: 1-3 working days **
More than 10 pieces available (online and in specialist shops)
Intended use
A centre drill is used to create a centre point on workpieces. This centre hole allows, for example, a centre point to be used to support the workpiece via the tailstock of a lathe. A centre drill can also be used for pre-drilling. Due to the small size of the centre point on the drill, only minor radial forces and reaction forces caused by the chip are generated when starting to drill a workpiece. This reduces the likelihood of the drill ‘running off course’, thereby significantly improving the positional accuracy of the hole to be drilled. The actual hole can then be drilled using a twist drill, which is guided laterally from the outset by the centring hole. Centre drills are particularly short and have a stepped profile, featuring an additional centre point at the very front. The diameter of this point is also the nominal diameter of the centre drill.
Technical data
| Nominal diameter [mm]: | 1,0 |
|---|---|
| Surface coating: | TiN |
| Total length [mm]: | 31 |
| Ø shaft [mm]: | 3 |
| Material: | HSS |
Drill bit suitable for use on both sides
Made from HSS steel
Titanium nitride (TiN) coated for a longer service life
Nominal diameter: 1.0 mm
Shank diameter: 3 mm
Description of the
This centre drill has a nominal diameter of 1.0 mm. The drill bit is made of HSS steel and can be used on both sides. The centre drill is also titanium nitride-coated, which contributes to greater heat resistance and a longer service life. TiN-coated drill bits are intended for universal use. This means that soft materials can be machined in the same way as hard materials.
Scope of delivery
- 1 x 1.0 mm TiN-coated centre drill
More about the brand and products from
This centre drill has a nominal diameter of 1.0 mm. The drill bit is made of HSS steel and can be used on both sides. The centre drill is also titanium nitride-coated, which contributes to greater heat resistance and a longer service life. TiN-coated drill bits are intended for universal use. This means that soft materials can be machined in the same way as hard materials.
This centre drill has a nominal diameter of 1.25 mm. The drill bit is made of HSS steel and can be used on both sides. The centre drill is also titanium nitride coated, which contributes to greater heat resistance and a longer service life. TiN-coated drill bits are intended for universal use. This means that soft materials can be machined in the same way as hard materials.
This centre drill has a nominal diameter of 1.6 mm. The drill bit is made of HSS steel and can be used on both sides. In addition, the centre drill is titanium nitride coated, which contributes to greater heat resistance and a longer service life. TiN-coated drill bits are intended for universal use. This means that soft materials can be machined in the same way as hard materials.
This centre drill has a nominal diameter of 2.0 mm. The drill bit is made of HSS steel and can be used on both sides. In addition, the centre drill is titanium nitride-coated, which contributes to greater heat resistance and a longer service life. TiN-coated drill bits are intended for universal use. This means that soft materials can be machined in the same way as hard materials.
This centre drill has a nominal diameter of 2.5 mm. The drill bit is made of HSS steel and can be used on both sides. The centre drill is also titanium nitride-coated, which contributes to greater heat resistance and a longer service life. TiN-coated drill bits are intended for universal use. This means that soft materials can be machined in the same way as hard materials.
This centre drill has a nominal diameter of 3.15 mm. The drill bit is made of HSS steel and can be used on both sides. The centre drill is also titanium nitride-coated, which contributes to greater heat resistance and a longer service life. TiN-coated drill bits are intended for universal use. This means that soft materials can be machined in the same way as hard materials.
This centre drill has a nominal diameter of 4.0 mm. The drill bit is made of HSS steel and can be used on both sides. The centre drill is also titanium nitride-coated, which contributes to greater heat resistance and a longer service life. TiN-coated drill bits are intended for universal use. This means that soft materials can be machined in the same way as hard materials.
This centre drill has a nominal diameter of 5.0 mm. The drill bit is made of HSS steel and can be used on both sides. The centre drill is also titanium nitride coated, which contributes to greater heat resistance and a longer service life. TiN-coated drill bits are intended for universal use. This means that soft materials can be machined in the same way as hard materials.
This centre drill has a nominal diameter of 6.3 mm. The drill bit is made of HSS steel and can be used on both sides. The centre drill is also titanium nitride-coated, which contributes to greater heat resistance and a longer service life. TiN-coated drill bits are intended for universal use. This means that soft materials can be machined in the same way as hard materials.
This centre drill has a nominal diameter of 8.0 mm. The drill bit is made of HSS steel and can be used on both sides. In addition, the centre drill is titanium nitride-coated, which contributes to greater heat resistance and a longer service life. TiN-coated drill bits are intended for universal use. This means that soft materials can be machined in the same way as hard materials.
This centre drill has a nominal diameter of 10.0 mm. The drill bit is made of HSS steel and can be used on both sides. In addition, the centre drill is titanium nitride-coated, which contributes to greater heat resistance and a longer service life. TiN-coated drill bits are intended for universal use. This means that soft materials can be machined in the same way as hard materials.
€2.50*
Contents: 1 pcs
€2.50*
Contents: 1 pcs
€2.50*
Contents: 1 pcs
€2.50*
Contents: 1 pcs
€3.00*
Contents: 1 pcs
€3.00*
Contents: 1 pcs
€4.00*
Contents: 1 pcs
€5.50*
Contents: 1 pcs
€7.50*
Contents: 1 pcs
€12.50*
Contents: 1 pcs
€18.50*
Contents: 1 pcs
27 March 2024 23:01
top Zentrierbohrer
Wie immer gute Qualität zum günstigen Preis
5 January 2023 18:19
Super.
Super.
6 January 2022 00:00
Zentrierbohrer
Übliche Werkzeugqualität sehr gut verarbeitet
17 December 2021 00:00
Filigranes Teil
Brechen gerne mal ab. Aber kein Problem, da der Nachschub von Paulimot schnell kommt. Super Service.
9 November 2021 00:00
sehr gut
Sehr gut , mehr kann man nicht sagen
21 August 2021 00:00
Gute Qualität
Macht genau das was er soll. Der ZB erfordert eine genaue Ausrichtung im Zentrierfutter, sonst bricht die Bohrer spitze ab. Das Problem liegt nicht am Werkzeuge, sondern meist an der Maschineneinstellung.
19 February 2021 00:00
ok
-
5 August 2020 00:00
Artikel wie beschrieben
Preis / Leistungsverhältnis in Ordnung