Centre drill 1.25 mm HSS
€2.00*
Prices incl. 19% VAT. plus Shipping costs
Delivery time: 1-3 working days **
More than 10 pieces available (online and in specialist shops)
Intended use
A centre drill is used to create a centre point on workpieces. This centre hole allows, for example, a centre point to be used to support the workpiece via the tailstock of a lathe. A centre drill can also be used for pre-drilling. Due to the small size of the centre point on the drill, only minor radial forces and reaction forces caused by the chip are generated when starting to drill a workpiece. This reduces the likelihood of the drill ‘running off course’, thereby significantly improving the positional accuracy of the hole to be drilled. The actual hole can then be drilled using a twist drill, which is guided laterally from the outset by the centring hole. Centre drills are particularly short and have a stepped profile, featuring an additional centre point at the very front. The diameter of this point is also the nominal diameter of the centre drill.
Technical data
| Nominal diameter [mm]: | 1,25 |
|---|---|
| Total length [mm]: | 32 |
| Ø shaft [mm]: | 3 |
| Material: | HSS |
Drill bit suitable for use on both sides
Made from HSS steel
Nominal diameter: 1.25 mm
Shank diameter: 3 mm
Description of the
This centre drill has a nominal diameter of 1.25 mm. The drill bit is made of HSS steel and can be used on both sides.
Scope of delivery
- 1 x 1.25 mm HSS centre drill
More about the brand and products from
This centre drill has a nominal diameter of 1.25 mm. The drill bit is made of HSS steel and can be used on both sides.
This centre drill has a nominal diameter of 1.0 mm. The drill bit is made of HSS steel and can be used on both sides.
This centre drill has a nominal diameter of 1.6 mm. The drill bit is made of HSS steel and can be used on both sides.
This centre drill has a nominal diameter of 2.0 mm. The drill bit is made of HSS steel and can be used on both sides.
This centre drill has a nominal diameter of 2.5 mm. The drill bit is made of HSS steel and can be used on both sides.
This centre drill has a nominal diameter of 3.15 mm. The drill bit is made of HSS steel and can be used on both sides.
This centre drill has a nominal diameter of 4.0 mm. The drill bit is made of HSS steel and can be used on both sides.
This centre drill has a nominal diameter of 5.0 mm. The drill bit is made of HSS steel and can be used on both sides.
This centre drill has a nominal diameter of 6.3 mm. The drill bit is made of HSS steel and can be used on both sides.
This centre drill has a nominal diameter of 8.0 mm. The drill bit is made of HSS steel and can be used on both sides.
This centre drill has a nominal diameter of 10.0 mm. The drill bit is made of HSS steel and can be used on both sides.
€2.00*
Contents: 1 pcs
€2.00*
Contents: 1 pcs
€2.00*
Contents: 1 pcs
€2.00*
Contents: 1 pcs
€2.50*
Contents: 1 pcs
€2.50*
Contents: 1 pcs
€3.50*
Contents: 1 pcs
€5.00*
Contents: 1 pcs
€7.00*
Contents: 1 pcs
€11.50*
Contents: 1 pcs
€17.90*
Contents: 1 pcs
21 August 2021 00:00
Gute Qualität
Macht das was er soll.