Centre drill 1.6 mm TiAlN-coated
€3.50*
Prices incl. 19% VAT. plus Shipping costs
Delivery time: 1-3 working days **
More than 10 pieces available (online and in specialist shops)
Intended use
A centring drill is used to create a centring point on workpieces. This centring hole can be used, for example, to insert a centre point to support the workpiece via the tailstock of a lathe. A centre drill can also be used for pre-drilling. Due to the small dimensioned centre point of the drill, low radial forces and reaction forces occur through the chip when drilling into a workpiece. This prevents the drill from "running", which significantly improves the positioning accuracy of the hole to be drilled. The actual hole can then be drilled with a twist drill, which is guided laterally from the start by the centring hole. Centring drills are particularly short and have a stepped profile with an additional centring tip at the very front. The diameter of this tip is also the nominal diameter of the centre drill.
Technical data
| Nominal diameter [mm]: | 1,6 |
|---|---|
| Surface coating: | TiAIN |
| Total length [mm]: | 34 |
| Ø shaft [mm]: | 4 |
| Material: | HSS |
Drill bit can be used on both sides
Made from HSS steel
Titanium-aluminium-nitrogen-coated (TiAlN) for longer tool life
For machining hard materials such as steel, stainless steel and titanium alloys
Nominal diameter: 1.6 mm
Description of the
This centre drill has a nominal diameter of 1.6 mm. The drill bit is made of HSS steel and can be used on both sides. In addition, the centre drill has a titanium-aluminium-nitrogen coating, which results in high resistance to heat hardening and oxidation. The TiAlN coating is an all-round coating that is suitable for universal use. It allows the machining of hard materials such as steel, stainless steel or titanium alloys. Another advantage is that the use of cooling lubricant is not absolutely necessary. However, the use of coolant generally increases the service life of the drill bit.
Scope of delivery
- 1 x centre drill 1.6 mm TiAlN-coated
More about the brand and products from
This centre drill has a nominal diameter of 1.6 mm. The drill bit is made of HSS steel and can be used on both sides. In addition, the centre drill has a titanium-aluminium-nitrogen coating, which results in high resistance to heat hardening and oxidation. The TiAlN coating is an all-round coating that is suitable for universal use. It allows the machining of hard materials such as steel, stainless steel or titanium alloys. Another advantage is that the use of cooling lubricant is not absolutely necessary. However, the use of coolant generally increases the service life of the drill bit.
This centre drill has a nominal diameter of 1.0 mm. The drill bit is made of HSS steel and can be used on both sides. In addition, the centre drill has a titanium-aluminium-nitrogen coating, which results in high resistance to heat hardening and oxidation. The TiAlN coating is an all-round coating that is suitable for universal use. It allows the machining of hard materials such as steel, stainless steel or titanium alloys. Another advantage is that the use of cooling lubricant is not absolutely necessary. However, the use of coolant generally increases the service life of the drill bit.
This centre drill has a nominal diameter of 1.25 mm. The drill bit is made of HSS steel and can be used on both sides. In addition, the centre drill has a titanium-aluminium-nitrogen coating, which results in high resistance to heat hardening and oxidation. The TiAlN coating is an all-round coating that is suitable for universal use. It allows the machining of hard materials such as steel, stainless steel or titanium alloys. Another advantage is that the use of cooling lubricant is not absolutely necessary. However, the use of coolant generally increases the service life of the drill bit.
This centre drill has a nominal diameter of 2.0 mm. The drill bit is made of HSS steel and can be used on both sides. In addition, the centre drill has a titanium-aluminium-nitrogen coating, which results in high resistance to heat hardening and oxidation. The TiAlN coating is an all-round coating that is suitable for universal use. It allows the machining of hard materials such as steel, stainless steel or titanium alloys. Another advantage is that the use of cooling lubricant is not absolutely necessary. However, the use of coolant generally increases the service life of the drill bit.
This centre drill has a nominal diameter of 2.5 mm. The drill bit is made of HSS steel and can be used on both sides. In addition, the centre drill has a titanium-aluminium-nitrogen coating, which results in high resistance to heat hardening and oxidation. The TiAlN coating is an all-round coating that is suitable for universal use. It allows the machining of hard materials such as steel, stainless steel or titanium alloys. Another advantage is that the use of cooling lubricant is not absolutely necessary. However, the use of coolant generally increases the service life of the drill bit.
This centre drill has a nominal diameter of 3.15 mm. The drill bit is made of HSS steel and can be used on both sides. In addition, the centre drill has a titanium-aluminium-nitrogen coating, which results in high resistance to heat hardening and oxidation. The TiAlN coating is an all-round coating that is suitable for universal use. It allows the machining of hard materials such as steel, stainless steel or titanium alloys. Another advantage is that the use of cooling lubricant is not absolutely necessary. However, the use of coolant generally increases the service life of the drill bit.
This centre drill has a nominal diameter of 4.0 mm. The drill bit is made of HSS steel and can be used on both sides. In addition, the centre drill has a titanium-aluminium-nitrogen coating, which results in high resistance to heat hardening and oxidation. The TiAlN coating is an all-round coating that is suitable for universal use. It allows the machining of hard materials such as steel, stainless steel or titanium alloys. Another advantage is that the use of cooling lubricant is not absolutely necessary. However, the use of coolant generally increases the service life of the drill bit.
This centre drill has a nominal diameter of 5.0 mm. The drill bit is made of HSS steel and can be used on both sides. In addition, the centre drill has a titanium-aluminium-nitrogen coating, which results in high resistance to heat hardening and oxidation. The TiAlN coating is an all-round coating that is suitable for universal use. It allows the machining of hard materials such as steel, stainless steel or titanium alloys. Another advantage is that the use of cooling lubricant is not absolutely necessary. However, the use of coolant generally increases the service life of the drill bit.
This centre drill has a nominal diameter of 6.3 mm. The drill bit is made of HSS steel and can be used on both sides. In addition, the centre drill has a titanium-aluminium-nitrogen coating, which results in high resistance to heat hardening and oxidation. The TiAlN coating is an all-round coating that is suitable for universal use. It allows the machining of hard materials such as steel, stainless steel or titanium alloys. Another advantage is that the use of cooling lubricant is not absolutely necessary. However, the use of coolant generally increases the service life of the drill bit.
This centre drill has a nominal diameter of 8.0 mm. The drill bit is made of HSS steel and can be used on both sides. In addition, the centre drill has a titanium-aluminium-nitrogen coating, which results in high resistance to heat hardening and oxidation. The TiAlN coating is an all-round coating that is suitable for universal use. It allows the machining of hard materials such as steel, stainless steel or titanium alloys. Another advantage is that the use of cooling lubricant is not absolutely necessary. However, the use of coolant generally increases the service life of the drill bit.
This centre drill has a nominal diameter of 10.0 mm. The drill bit is made of HSS steel and can be used on both sides. In addition, the centre drill has a titanium-aluminium-nitrogen coating, which results in high resistance to heat hardening and oxidation. The TiAlN coating is an all-round coating that is suitable for universal use. It allows the machining of hard materials such as steel, stainless steel or titanium alloys. Another advantage is that the use of cooling lubricant is not absolutely necessary. However, the use of coolant generally increases the service life of the drill bit.
€3.50*
Content: 1 pcs
€3.00*
Content: 1 pcs
€3.50*
Content: 1 pcs
€4.00*
Content: 1 pcs
€4.50*
Content: 1 pcs
€5.50*
Content: 1 pcs
€7.50*
Content: 1 pcs
€10.50*
Content: 1 pcs
€15.00*
Content: 1 pcs
€22.50*
Content: 1 pcs
€33.00*
Content: 1 pcs
29 September 2022 15:41
Gute Qualität, läuft rund, schneidet gut.
Gute Qualität, läuft rund, schneidet gut.
14 February 2021 00:00
OK!
Sieht gut aus, hab aber noch nicht ausreichend getestet!
8 December 2020 00:00
Gute Qualität
Gutes Produkt zu einem guten Preis