Centre drill 2.0 mm HSS
€2.00*
Prices incl. 19% VAT. plus Shipping costs
Delivery time: 1-3 working days **
More than 10 pieces available (online and in specialist shops)
Intended use
A centring drill is used to create a centring point on workpieces. This centring hole can be used, for example, to insert a centre point to support the workpiece via the tailstock of a lathe. A centre drill can also be used for pre-drilling. Due to the small dimensioned centre point of the drill, low radial forces and reaction forces occur through the chip when drilling into a workpiece. This prevents the drill from "running", which significantly improves the positioning accuracy of the hole to be drilled. The actual hole can then be drilled with a twist drill, which is guided laterally from the start by the centring hole. Centring drills are particularly short and have a stepped profile, which has an additional centring tip at the very front. The diameter of this tip is also the nominal diameter of the centre drill.
Technical data
| Nominal diameter [mm]: | 2,0 |
|---|---|
| Total length [mm]: | 40 |
| Ø shaft [mm]: | 5 |
| Material: | HSS |
Drill bit can be used on both sides
Made from HSS steel
Nominal diameter: 2.0 mm
Shank diameter: 5 mm
Description of the
This centre drill has a nominal diameter of 2.0 mm. The drill bit is made of HSS steel and can be used on both sides.
Scope of delivery
- 1 x centre drill 2.0 mm HSS
More about the brand and products from
This centre drill has a nominal diameter of 2.0 mm. The drill bit is made of HSS steel and can be used on both sides.
This centre drill has a nominal diameter of 1.0 mm. The drill bit is made of HSS steel and can be used on both sides.
This centre drill has a nominal diameter of 1.25 mm. The drill bit is made of HSS steel and can be used on both sides.
This centre drill has a nominal diameter of 1.6 mm. The drill bit is made of HSS steel and can be used on both sides.
This centre drill has a nominal diameter of 2.5 mm. The drill bit is made of HSS steel and can be used on both sides.
This centre drill has a nominal diameter of 3.15 mm. The drill bit is made of HSS steel and can be used on both sides.
This centre drill has a nominal diameter of 4.0 mm. The drill bit is made of HSS steel and can be used on both sides.
This centre drill has a nominal diameter of 5.0 mm. The drill bit is made of HSS steel and can be used on both sides.
This centre drill has a nominal diameter of 6.3 mm. The drill bit is made of HSS steel and can be used on both sides.
This centre drill has a nominal diameter of 8.0 mm. The drill bit is made of HSS steel and can be used on both sides.
This centre drill has a nominal diameter of 10.0 mm. The drill bit is made of HSS steel and can be used on both sides.
€2.00*
Content: 1 pcs
€2.00*
Content: 1 pcs
€2.00*
Content: 1 pcs
€2.00*
Content: 1 pcs
€2.50*
Content: 1 pcs
€2.50*
Content: 1 pcs
€3.50*
Content: 1 pcs
€5.50*
Content: 1 pcs
€9.50*
Content: 1 pcs
€15.00*
Content: 1 pcs
€23.50*
Content: 1 pcs
4 January 2025 12:07
Qualität ist in Ordnung.
Qualität ist in Ordnung.
16 February 2023 09:19
Alles gut
Alles gut
30 December 2022 19:27
gute Qualität, Preis-Leistung stimmt
gute Qualität, Preis-Leistung stimmt
12 August 2022 10:18
Gute Qualität, passt.
Gute Qualität, passt.
19 April 2021 00:00
.
-
16 February 2021 00:00
1A
Bohrt wie der Teufel!
1 January 2021 00:00
Zentrierbohrer 1 mm
Artikel ist gut
21 December 2020 00:00
Qualität wie erwartet.
Bohrer sind ok.
20 November 2020 00:00
Bohrer
o.k.
9 November 2020 00:00
Bohrer
alles sehr gut