Centre drill 2.5 mm HSS
€2.50*
Prices incl. 19% VAT. plus Shipping costs
Delivery time: 1-3 working days **
More than 10 pieces available (online and in specialist shops)
Intended use
A centring drill is used to create a centring point on workpieces. This centring hole can be used, for example, to insert a centre point to support the workpiece via the tailstock of a lathe. A centre drill can also be used for pre-drilling. Due to the small dimensioned centre point of the drill, low radial forces and reaction forces occur through the chip when drilling into a workpiece. This prevents the drill from "running", which significantly improves the positioning accuracy of the hole to be drilled. The actual hole can then be drilled with a twist drill, which is guided laterally from the start by the centring hole. Centring drills are particularly short and have a stepped profile, which has an additional centring tip at the very front. The diameter of this tip is also the nominal diameter of the centre drill.
Technical data
| Nominal diameter [mm]: | 2,5 |
|---|---|
| Total length [mm]: | 45 |
| Ø shaft [mm]: | 6 |
| Material: | HSS |
Drill bit can be used on both sides
Made from HSS steel
Nominal diameter: 2.5 mm
Shank diameter: 6 mm
Description of the
This centre drill has a nominal diameter of 2.5 mm. The drill bit is made of HSS steel and can be used on both sides.
Scope of delivery
- 1 x centre drill 2.5 mm HSS
More about the brand and products from
This centre drill has a nominal diameter of 2.5 mm. The drill bit is made of HSS steel and can be used on both sides.
This centre drill has a nominal diameter of 1.0 mm. The drill bit is made of HSS steel and can be used on both sides.
This centre drill has a nominal diameter of 1.25 mm. The drill bit is made of HSS steel and can be used on both sides.
This centre drill has a nominal diameter of 1.6 mm. The drill bit is made of HSS steel and can be used on both sides.
This centre drill has a nominal diameter of 2.0 mm. The drill bit is made of HSS steel and can be used on both sides.
This centre drill has a nominal diameter of 3.15 mm. The drill bit is made of HSS steel and can be used on both sides.
This centre drill has a nominal diameter of 4.0 mm. The drill bit is made of HSS steel and can be used on both sides.
This centre drill has a nominal diameter of 5.0 mm. The drill bit is made of HSS steel and can be used on both sides.
This centre drill has a nominal diameter of 6.3 mm. The drill bit is made of HSS steel and can be used on both sides.
This centre drill has a nominal diameter of 8.0 mm. The drill bit is made of HSS steel and can be used on both sides.
This centre drill has a nominal diameter of 10.0 mm. The drill bit is made of HSS steel and can be used on both sides.
€2.50*
Content: 1 pcs
€2.00*
Content: 1 pcs
€2.00*
Content: 1 pcs
€2.00*
Content: 1 pcs
€2.00*
Content: 1 pcs
€2.50*
Content: 1 pcs
€3.50*
Content: 1 pcs
€5.50*
Content: 1 pcs
€9.50*
Content: 1 pcs
€15.00*
Content: 1 pcs
€23.50*
Content: 1 pcs
23 January 2025 19:04
Ausgezeichnete Qualität wie immer, vielen Dank!
Alles Tip Top vielen Dank!
4 January 2025 12:04
Gute Qualität Kann ich nur Empfehlen.
Gute Qualität Kann ich nur Empfehlen.
30 December 2022 19:27
gute Qualität, Preis-Leistung stimmt
gute Qualität, Preis-Leistung stimmt
6 December 2022 08:43
Macht was es soll.
Macht was es soll.
17 April 2022 17:14
Danke für schnörkellose Abwicklung! Wie gut die Teile
Danke für schnörkellose Abwicklung! Wie gut die Teile sind, wird die Zeit zeigen.
13 July 2021 00:00
Alles perfekt
Super Qualität, super Preis und schnelle Lieferung.. alles Top!
17 February 2021 00:00
entspricht der gewohnten paulimot Qualität !
alles io. Schnelle Lieferung !