Centre drill 2.5 mm TiN-coated
€3.00*
Prices incl. 19% VAT. plus Shipping costs
Delivery time: 1-3 working days **
More than 10 pieces available (online and in specialist shops)
Intended use
A centring drill is used to create a centring point on workpieces. This centring hole can be used, for example, to insert a centre point to support the workpiece via the tailstock of a lathe. A centre drill can also be used for pre-drilling. Due to the small dimensioned centre point of the drill, low radial forces and reaction forces occur through the chip when drilling into a workpiece. This prevents the drill from "running", which significantly improves the positioning accuracy of the hole to be drilled. The actual hole can then be drilled with a twist drill, which is guided laterally from the start by the centring hole. Centring drills are particularly short and have a stepped profile with an additional centring tip at the very front. The diameter of this tip is also the nominal diameter of the centre drill.
Technical data
| Nominal diameter [mm]: | 2,5 |
|---|---|
| Surface coating: | TiN |
| Total length [mm]: | 45 |
| Ø shaft [mm]: | 6 |
| Material: | HSS |
Drill bit can be used on both sides
Made from HSS steel
Titanium nitride-coated (TiN) for longer tool life
Nominal diameter: 2.5 mm
Shank diameter: 6 mm
Description of the
This centre drill has a nominal diameter of 2.5 mm. The drill bit is made of HSS steel and can be used on both sides. The centre drill is also titanium nitride-coated, which contributes to greater heat resistance and a longer service life. TiN-coated drill bits are intended for universal use. This means that soft materials can be machined in the same way as hard materials.
Scope of delivery
- 1 x centre drill 2.5 mm TiN-coated
More about the brand and products from
This centre drill has a nominal diameter of 2.5 mm. The drill bit is made of HSS steel and can be used on both sides. The centre drill is also titanium nitride-coated, which contributes to greater heat resistance and a longer service life. TiN-coated drill bits are intended for universal use. This means that soft materials can be machined in the same way as hard materials.
This centre drill has a nominal diameter of 1.0 mm. The drill bit is made of HSS steel and can be used on both sides. The centre drill is also titanium nitride-coated, which contributes to greater heat resistance and a longer service life. TiN-coated drill bits are intended for universal use. This means that soft materials can be machined in the same way as hard materials.
This centre drill has a nominal diameter of 1.25 mm. The drill bit is made of HSS steel and can be used on both sides. The centre drill is also titanium nitride coated, which contributes to greater heat resistance and a longer service life. TiN-coated drill bits are intended for universal use. This means that soft materials can be machined in the same way as hard materials.
This centre drill has a nominal diameter of 1.6 mm. The drill bit is made of HSS steel and can be used on both sides. In addition, the centre drill is titanium nitride coated, which contributes to greater heat resistance and a longer service life. TiN-coated drill bits are intended for universal use. This means that soft materials can be machined in the same way as hard materials.
This centre drill has a nominal diameter of 2.0 mm. The drill bit is made of HSS steel and can be used on both sides. In addition, the centre drill is titanium nitride-coated, which contributes to greater heat resistance and a longer service life. TiN-coated drill bits are intended for universal use. This means that soft materials can be machined in the same way as hard materials.
This centre drill has a nominal diameter of 3.15 mm. The drill bit is made of HSS steel and can be used on both sides. The centre drill is also titanium nitride-coated, which contributes to greater heat resistance and a longer service life. TiN-coated drill bits are intended for universal use. This means that soft materials can be machined in the same way as hard materials.
This centre drill has a nominal diameter of 4.0 mm. The drill bit is made of HSS steel and can be used on both sides. The centre drill is also titanium nitride-coated, which contributes to greater heat resistance and a longer service life. TiN-coated drill bits are intended for universal use. This means that soft materials can be machined in the same way as hard materials.
This centre drill has a nominal diameter of 5.0 mm. The drill bit is made of HSS steel and can be used on both sides. The centre drill is also titanium nitride coated, which contributes to greater heat resistance and a longer service life. TiN-coated drill bits are intended for universal use. This means that soft materials can be machined in the same way as hard materials.
This centre drill has a nominal diameter of 6.3 mm. The drill bit is made of HSS steel and can be used on both sides. The centre drill is also titanium nitride-coated, which contributes to greater heat resistance and a longer service life. TiN-coated drill bits are intended for universal use. This means that soft materials can be machined in the same way as hard materials.
This centre drill has a nominal diameter of 8.0 mm. The drill bit is made of HSS steel and can be used on both sides. In addition, the centre drill is titanium nitride-coated, which contributes to greater heat resistance and a longer service life. TiN-coated drill bits are intended for universal use. This means that soft materials can be machined in the same way as hard materials.
This centre drill has a nominal diameter of 10.0 mm. The drill bit is made of HSS steel and can be used on both sides. In addition, the centre drill is titanium nitride-coated, which contributes to greater heat resistance and a longer service life. TiN-coated drill bits are intended for universal use. This means that soft materials can be machined in the same way as hard materials.
€3.00*
Content: 1 pcs
€2.50*
Content: 1 pcs
€2.50*
Content: 1 pcs
€2.50*
Content: 1 pcs
€2.50*
Content: 1 pcs
€3.00*
Content: 1 pcs
€4.00*
Content: 1 pcs
€6.50*
Content: 1 pcs
€10.50*
Content: 1 pcs
€16.00*
Content: 1 pcs
€24.50*
Content: 1 pcs
24 March 2023 09:29
Gut zu verwenden
Gut zu verwenden
8 June 2021 00:00
Ok
Passt
3 December 2020 00:00
Zentrierbohrer
OAlles OK !!!
26 June 2020 00:00
Besser mit Beschichtung, Verwendung bei Edelstahl
Die Beschichtung macht sich bei Edelstahl bemerkbar im Vergleich zu ohne. Habe lange ohne Beschichtung zentriert, nun mal diesen Zentrierbohrer bei Edelstahl ausprobiert, Ergebnis, eindeutig besser, zentriert mit weniger Druck, somit ist die Standzeit auch länger. Alles natürlich mit Kühlmittel bei Edelstahl.
28 March 2020 00:00
Paulimot ist eine gute Adresse.
Kein Einwand.Paulimot