Centre drill 3.15 mm TiAlN-coated
€5.50*
Prices incl. 19% VAT. plus Shipping costs
Delivery time: 1-3 working days **
More than 10 pieces available (online and in specialist shops)
Intended use
A centre drill is used to create a centre point on workpieces. This centre hole allows, for example, a centre point to be used to support the workpiece via the tailstock of a lathe. A centre drill can also be used for pre-drilling. Due to the small size of the centre point on the drill, only minimal radial forces and reaction forces caused by the chip are generated when starting to drill a workpiece. This reduces the likelihood of the drill ‘running off course’, thereby significantly improving the positional accuracy of the hole to be drilled. The actual hole can then be drilled using a twist drill, which is guided laterally from the outset by the centring hole. Centre drills are particularly short and have a stepped profile, featuring an additional centring tip at the very front. The diameter of this tip is also the nominal diameter of the centre drill.
Technical data
| Nominal diameter [mm]: | 3,15 |
|---|---|
| Surface coating: | TiAIN |
| Total length [mm]: | 50 |
| Ø shaft [mm]: | 8 |
| Material: | HSS |
Drill bit can be used on both sides
Made from HSS steel
Titanium-aluminium-nitrogen-coated (TiAlN) for a longer service life
For machining hard materials, such as steel, stainless steel and titanium alloys
Nominal diameter: 3.15 mm
Description of the
This centre drill has a nominal diameter of 3.15 mm. The drill bit is made of HSS steel and can be used on both sides. In addition, the centre drill has a titanium-aluminium-nitrogen coating, which results in high resistance to heat hardening and oxidation. The TiAlN coating is an all-round coating that is suitable for universal use. It allows the machining of hard materials such as steel, stainless steel or titanium alloys. Another advantage is that the use of cooling lubricant is not absolutely necessary. However, the use of coolant generally increases the service life of the drill bit.
Scope of delivery
- 1 x 3.15 mm centre drill, TiAlN-coated
More about the brand and products from
This centre drill has a nominal diameter of 3.15 mm. The drill bit is made of HSS steel and can be used on both sides. In addition, the centre drill has a titanium-aluminium-nitrogen coating, which results in high resistance to heat hardening and oxidation. The TiAlN coating is an all-round coating that is suitable for universal use. It allows the machining of hard materials such as steel, stainless steel or titanium alloys. Another advantage is that the use of cooling lubricant is not absolutely necessary. However, the use of coolant generally increases the service life of the drill bit.
This centre drill has a nominal diameter of 1.0 mm. The drill bit is made of HSS steel and can be used on both sides. In addition, the centre drill has a titanium-aluminium-nitrogen coating, which results in high resistance to heat hardening and oxidation. The TiAlN coating is an all-round coating that is suitable for universal use. It allows the machining of hard materials such as steel, stainless steel or titanium alloys. Another advantage is that the use of cooling lubricant is not absolutely necessary. However, the use of coolant generally increases the service life of the drill bit.
This centre drill has a nominal diameter of 1.25 mm. The drill bit is made of HSS steel and can be used on both sides. In addition, the centre drill has a titanium-aluminium-nitrogen coating, which results in high resistance to heat hardening and oxidation. The TiAlN coating is an all-round coating that is suitable for universal use. It allows the machining of hard materials such as steel, stainless steel or titanium alloys. Another advantage is that the use of cooling lubricant is not absolutely necessary. However, the use of coolant generally increases the service life of the drill bit.
This centre drill has a nominal diameter of 1.6 mm. The drill bit is made of HSS steel and can be used on both sides. In addition, the centre drill has a titanium-aluminium-nitrogen coating, which results in high resistance to heat hardening and oxidation. The TiAlN coating is an all-round coating that is suitable for universal use. It allows the machining of hard materials such as steel, stainless steel or titanium alloys. Another advantage is that the use of cooling lubricant is not absolutely necessary. However, the use of coolant generally increases the service life of the drill bit.
This centre drill has a nominal diameter of 2.0 mm. The drill bit is made of HSS steel and can be used on both sides. In addition, the centre drill has a titanium-aluminium-nitrogen coating, which results in high resistance to heat hardening and oxidation. The TiAlN coating is an all-round coating that is suitable for universal use. It allows the machining of hard materials such as steel, stainless steel or titanium alloys. Another advantage is that the use of cooling lubricant is not absolutely necessary. However, the use of coolant generally increases the service life of the drill bit.
This centre drill has a nominal diameter of 2.5 mm. The drill bit is made of HSS steel and can be used on both sides. In addition, the centre drill has a titanium-aluminium-nitrogen coating, which results in high resistance to heat hardening and oxidation. The TiAlN coating is an all-round coating that is suitable for universal use. It allows the machining of hard materials such as steel, stainless steel or titanium alloys. Another advantage is that the use of cooling lubricant is not absolutely necessary. However, the use of coolant generally increases the service life of the drill bit.
This centre drill has a nominal diameter of 4.0 mm. The drill bit is made of HSS steel and can be used on both sides. In addition, the centre drill has a titanium-aluminium-nitrogen coating, which results in high resistance to heat hardening and oxidation. The TiAlN coating is an all-round coating that is suitable for universal use. It allows the machining of hard materials such as steel, stainless steel or titanium alloys. Another advantage is that the use of cooling lubricant is not absolutely necessary. However, the use of coolant generally increases the service life of the drill bit.
This centre drill has a nominal diameter of 5.0 mm. The drill bit is made of HSS steel and can be used on both sides. In addition, the centre drill has a titanium-aluminium-nitrogen coating, which results in high resistance to heat hardening and oxidation. The TiAlN coating is an all-round coating that is suitable for universal use. It allows the machining of hard materials such as steel, stainless steel or titanium alloys. Another advantage is that the use of cooling lubricant is not absolutely necessary. However, the use of coolant generally increases the service life of the drill bit.
This centre drill has a nominal diameter of 6.3 mm. The drill bit is made of HSS steel and can be used on both sides. In addition, the centre drill has a titanium-aluminium-nitrogen coating, which results in high resistance to heat hardening and oxidation. The TiAlN coating is an all-round coating that is suitable for universal use. It allows the machining of hard materials such as steel, stainless steel or titanium alloys. Another advantage is that the use of cooling lubricant is not absolutely necessary. However, the use of coolant generally increases the service life of the drill bit.
This centre drill has a nominal diameter of 8.0 mm. The drill bit is made of HSS steel and can be used on both sides. In addition, the centre drill has a titanium-aluminium-nitrogen coating, which results in high resistance to heat hardening and oxidation. The TiAlN coating is an all-round coating that is suitable for universal use. It allows the machining of hard materials such as steel, stainless steel or titanium alloys. Another advantage is that the use of cooling lubricant is not absolutely necessary. However, the use of coolant generally increases the service life of the drill bit.
This centre drill has a nominal diameter of 10.0 mm. The drill bit is made of HSS steel and can be used on both sides. In addition, the centre drill has a titanium-aluminium-nitrogen coating, which results in high resistance to heat hardening and oxidation. The TiAlN coating is an all-round coating that is suitable for universal use. It allows the machining of hard materials such as steel, stainless steel or titanium alloys. Another advantage is that the use of cooling lubricant is not absolutely necessary. However, the use of coolant generally increases the service life of the drill bit.
€5.50*
Content: 1 pcs
€3.00*
Content: 1 pcs
€3.50*
Content: 1 pcs
€3.50*
Content: 1 pcs
€4.00*
Content: 1 pcs
€4.50*
Content: 1 pcs
€7.50*
Content: 1 pcs
€8.00*
Content: 1 pcs
€11.50*
Content: 1 pcs
€17.50*
Content: 1 pcs
€24.90*
Content: 1 pcs
6 December 2022 10:54
Alles OK
Siehe oben. Hallo, habe schon einige Male bei Ihnen gekauft. Qualität , Service alles TOP. Gerne wieder. MfG Walter Hahn
15 November 2020 00:00
Gute Qualität
1A