Centre drill 4.0 mm HSS
€3.50*
Prices incl. 19% VAT. plus Shipping costs
Delivery time: 1-3 working days **
More than 10 pieces available (online and in specialist shops)
Intended use
A centring drill is used to create a centring point on workpieces. This centring hole can be used, for example, to insert a centre point to support the workpiece via the tailstock of a lathe. A centre drill can also be used for pre-drilling. Due to the small dimensioned centre point of the drill, low radial forces and reaction forces occur through the chip when drilling into a workpiece. This prevents the drill from "running", which significantly improves the positioning accuracy of the hole to be drilled. The actual hole can then be drilled with a twist drill, which is guided laterally from the start by the centring hole. Centring drills are particularly short and have a stepped profile, which has an additional centring tip at the very front. The diameter of this tip is also the nominal diameter of the centre drill.
Technical data
| Nominal diameter [mm]: | 4,0 |
|---|---|
| Total length [mm]: | 56 |
| Ø shaft [mm]: | 10 |
| Material: | HSS |
Drill bit can be used on both sides
Made from HSS steel
Nominal diameter: 4.0 mm
Shank diameter: 10 mm
Description of the
This centre drill has a nominal diameter of 4.0 mm. The drill bit is made of HSS steel and can be used on both sides.
Scope of delivery
- 1 x centre drill 4.0 mm HSS
More about the brand and products from
This centre drill has a nominal diameter of 4.0 mm. The drill bit is made of HSS steel and can be used on both sides.
This centre drill has a nominal diameter of 1.0 mm. The drill bit is made of HSS steel and can be used on both sides.
This centre drill has a nominal diameter of 1.25 mm. The drill bit is made of HSS steel and can be used on both sides.
This centre drill has a nominal diameter of 1.6 mm. The drill bit is made of HSS steel and can be used on both sides.
This centre drill has a nominal diameter of 2.0 mm. The drill bit is made of HSS steel and can be used on both sides.
This centre drill has a nominal diameter of 2.5 mm. The drill bit is made of HSS steel and can be used on both sides.
This centre drill has a nominal diameter of 3.15 mm. The drill bit is made of HSS steel and can be used on both sides.
This centre drill has a nominal diameter of 5.0 mm. The drill bit is made of HSS steel and can be used on both sides.
This centre drill has a nominal diameter of 6.3 mm. The drill bit is made of HSS steel and can be used on both sides.
This centre drill has a nominal diameter of 8.0 mm. The drill bit is made of HSS steel and can be used on both sides.
This centre drill has a nominal diameter of 10.0 mm. The drill bit is made of HSS steel and can be used on both sides.
€3.50*
Content: 1 pcs
€2.00*
Content: 1 pcs
€2.00*
Content: 1 pcs
€2.00*
Content: 1 pcs
€2.00*
Content: 1 pcs
€2.50*
Content: 1 pcs
€2.50*
Content: 1 pcs
€5.50*
Content: 1 pcs
€9.50*
Content: 1 pcs
€15.00*
Content: 1 pcs
€23.50*
Content: 1 pcs
13 December 2022 06:54
Robuster Bohrer, sehr empfehlenswert.
Robuster Bohrer, sehr empfehlenswert.
27 April 2022 10:11
Zentribohrer
Alles in Ordnung schnelle Lieferung
16 January 2022 00:00
Sehr gut
Absolut empfehlenswertes Zubehör
21 December 2021 00:00
I.O.
I.O.
7 December 2021 00:00
1A Qualität
Schnelle Lieferung, Top Qualität, Preis Ok, es macht Spaß damit zu arbeiten! Es war sicher nicht meine letzte Bestellung.
16 February 2021 00:00
1A
Bohrt wie der Teufel!
12 March 2020 00:00
Bohrer sind bestens
Bestens
8 March 2020 00:00
Zentrierbohrer
Für den Preis echt in Ordnung, Qualität ist auch super. Paulimot hat wieder einen neuen Kunde.