Centre drill 5.0 mm HSS
€5.00*
% €5.50* (9.09% saved)Prices incl. 19% VAT. plus Shipping costs
Delivery time: 1-3 working days **
More than 10 pieces available (online and in specialist shops)
Intended use
A centre drill is used to create a centre point on workpieces. This centre hole allows, for example, a centre point to be used to support the workpiece via the tailstock of a lathe. A centre drill can also be used for pre-drilling. Due to the small size of the centre point on the drill, only minor radial forces and reaction forces caused by the chip are generated when starting to drill a workpiece. This reduces the likelihood of the drill ‘running off course’, thereby significantly improving the positional accuracy of the hole to be drilled. The actual hole can then be drilled using a twist drill, which is guided laterally from the outset by the centring hole. Centre drills are particularly short and have a stepped profile, featuring an additional centre point at the very front. The diameter of this point is also the nominal diameter of the centre drill.
Technical data
| Nominal diameter [mm]: | 5,0 |
|---|---|
| Total length [mm]: | 63 |
| Ø shaft [mm]: | 12,5 |
| Material: | HSS |
Drill bit suitable for use on both sides
Made from HSS steel
Nominal diameter: 5.0 mm
Shank diameter: 12.5 mm
Description of the
This centre drill has a nominal diameter of 5.0 mm. The drill bit is made of HSS steel and can be used on both sides.
Scope of delivery
- 1 x 5.0 mm HSS centre drill
More about the brand and products from
This centre drill has a nominal diameter of 5.0 mm. The drill bit is made of HSS steel and can be used on both sides.
This centre drill has a nominal diameter of 1.0 mm. The drill bit is made of HSS steel and can be used on both sides.
This centre drill has a nominal diameter of 1.25 mm. The drill bit is made of HSS steel and can be used on both sides.
This centre drill has a nominal diameter of 1.6 mm. The drill bit is made of HSS steel and can be used on both sides.
This centre drill has a nominal diameter of 2.0 mm. The drill bit is made of HSS steel and can be used on both sides.
This centre drill has a nominal diameter of 2.5 mm. The drill bit is made of HSS steel and can be used on both sides.
This centre drill has a nominal diameter of 3.15 mm. The drill bit is made of HSS steel and can be used on both sides.
This centre drill has a nominal diameter of 4.0 mm. The drill bit is made of HSS steel and can be used on both sides.
This centre drill has a nominal diameter of 6.3 mm. The drill bit is made of HSS steel and can be used on both sides.
This centre drill has a nominal diameter of 8.0 mm. The drill bit is made of HSS steel and can be used on both sides.
This centre drill has a nominal diameter of 10.0 mm. The drill bit is made of HSS steel and can be used on both sides.
€5.00*
Contents: 1 pcs
€2.00*
Contents: 1 pcs
€2.00*
Contents: 1 pcs
€2.00*
Contents: 1 pcs
€2.00*
Contents: 1 pcs
€2.50*
Contents: 1 pcs
€2.50*
Contents: 1 pcs
€3.50*
Contents: 1 pcs
€7.00*
Contents: 1 pcs
€11.50*
Contents: 1 pcs
€17.90*
Contents: 1 pcs
13 August 2021 00:00
Entspricht komplett meinen Erwartungen
Qualität ist gut
10 August 2021 00:00
Macht was er soll
Der Zentrierbohrer den ich seit Jahren hatte, war plötzlich 'weg'. Ersatz musste her. Der neue ist gut und ich werde ihn nutzen, aber ich habe bei der Bestellung nicht drauf geachtet, dass sich die 5mm auf den vorderen Teil beziehen. War darum erstaunt, über das 'dicke Ding'. Trotzdem völlig zufrieden, ein gutes Werkzeug.
28 May 2021 00:00
Sehr gut
Schnell und gut, wie gewohnt
8 April 2021 00:00
Kort maar goed
Prima centerboor, mocht iets langer geweest zijn.
7 July 2020 00:00
Zentrierbohrer
Sehr zufrieden, weiter zu empfehlen .
12 March 2020 00:00
Bohrer sind bestens
Bestens