Centre punch set with dice edge, 37 pieces

This ball punch set made of tool steel contains 36 ball punches with diameters from 3.5 to 25.0 millimetres. The cube flank contains 21 spherical dies with diameters from 4.5 to 45.5 millimetres. Punches and anvils are hardened and polished. The beechwood stand included in the scope of delivery is used to store the punches and anvils in an organised manner.

This deformation set made of tool steel contains 36 ball punches with diameters from 3.5 to 25.0 millimetres. The punches are hardened and polished.

The cube, flat and grooved flanks included in the scope of delivery are also made of tool steel and are additionally hardened.

The cube flank contains 21 spherical dies with diameters from 4.5 to 45.5 mm.

The flat flank has 27 spherical dies with diameters from 3 to 25 mm.

The grooved flank (semicircular, V-shaped, flat) has 10 semicircular dies with diameters of 2.5 to 26 mm, 7 V-grooves with a width of 2.5 to 11.5 mm and 5 flat grooves with a width of 3 to 7 mm.

The second scoring groove (semicircular) has 10 semicircular dies with diameters of 4.7 to 19 mm.

A beechwood stand is included in this set for easy storage.

This ball punch set made of tool steel contains twelve ball punches with diameters from 2.3 to 11.5 mm. The punches are hardened and polished. They are supplied in a beech wood stand for easy storage.

This ball punch set made from tool steel contains 36 ball punches with diameters from 3.5 to 25.0 millimetres. The punches are hardened and polished. The beech wood stand included in the scope of delivery is used to store the punches neatly.

This deformation set made of tool steel contains 21 ball punches with diameters of 3 to 43 millimetres, 10 round profile punches with diameters of 2 to 24 mm, 5 square profile punches with dimensions of 2 x 2 to 6 x 6 mm, a 45° profile punch with dimensions of 12 x 12 mm and an oval punch with a diameter of 40 mm. The punches are hardened and polished.

The cube and groove flanks included in the scope of delivery are also made of tool steel and are additionally hardened and polished.

The cube flank contains 21 spherical dies with diameters from 4.5 to 45.5 mm.

The scoring flank contains 10 semicircular dies with diameters of 2.5 to 26 mm, 7 V-grooves with a width of 2.5 to 11.5 mm and 5 flat grooves with a width of 3 to 7 mm.

The flat flank has 17 spherical dies with diameters of 4 to 19.5 mm, 18 semi-circular groove dies with diameters of 4 to 24 millimetres, three V-grooves 4 to 6 millimetres wide and five oval dies measuring 16 x 10 to 21 x 13 millimetres.

The scope of delivery also includes a mini anvil, which is also made of hardened tool steel.

A beechwood stand is included in this set for easy storage.

This deformation set made of tool steel contains 36 ball punches with diameters of 3.5 to 25 millimetres, 10 round profile punches with diameters of 2 to 24 mm, 5 square profile punches with dimensions of 2 x 2 to 6 x 6 mm and a 45° profile punch with dimensions of 12 x 12 mm. The punches are hardened and polished.

The dice, scoring and flat flanks included in the scope of delivery are also made of tool steel and are additionally hardened and polished.

The cube flank contains 21 spherical dies with diameters from 4.5 to 45.5 mm.

The scoring flank contains 10 semicircular dies with diameters of 2.5 to 26 mm, 7 V-grooves with a width of 2.5 to 11.5 mm and 5 flat grooves with a width of 3 - 7 mm.

The flat flank has 10 semicircular moulds with diameters of 4.7 to 19 mm.

The scope of delivery also includes a mini anvil, which is also made of hardened tool steel.

A beechwood stand is included in this set for easy storage.

Made from tool steel, this ball punch set contains twelve ball punches with diameters from 2.3 to 11.5 mm. There are 12 spherical indentations with diameters from 4.4 to 14.6 mm in the die flank. Punches and anvils are hardened and polished. They are supplied in a beechwood stand for easy storage.

Made from tool steel, this ball punch set contains 24 ball punches with diameters from 2.3 to 25 mm. The cube flank contains 18 spherical indentations with diameters from 4.4 to 41 mm. Punches and anvils are hardened and polished. They are supplied in a beechwood stand for easy storage.

This ball punch set made of tool steel contains eight ball punches with diameters from 6 to 27 mm and a profile punch for oval dies. The flat die contains eight spherical dies with diameters from 4 to 25 mm and five oval dies from 16 x 11 to 22 x 15 mm. Punches and dies are hardened and polished. They are supplied in a beechwood stand for easy storage.

This ball punch set made from tool steel contains eight ball punches with diameters from six to 27 mm. The flat flank contains eight spherical dies with diameters from 7 to 28 mm. The punches and dies are hardened and polished. They are supplied in a beechwood stand for easy storage.

This anvil has 15 spherical dies with diameters of 6.5 to 31 millimetres, six semi-circular grooved dies with diameters of 3.5 to 8 millimetres, seven V-grooves 2.5 to 7 millimetres wide and seven flat dies 3 to 8 millimetres wide. All surfaces are ground. The countersink is made of hardened tool steel, the side lengths are 61 x 61 x 61 mm.

This die flank made of tool steel has an edge length of 49 mm. The cube flank has 18 spherical dies with diameters ranging from 4.4 to 41 millimetres. The surfaces and recesses are polished.

This flat punch has 27 spherical dies in diameters of 3 to 25 millimetres, the surfaces are ground and polished. The die is made of hardened tool steel, the side lengths are 130 x 61 x 23 mm.

This anvil has 17 spherical dies with diameters of 4 to 19.5 millimetres, 18 semi-circular grooved dies with diameters of 4 to 24 millimetres, three V-grooves 4 to 6 millimetres wide and five oval dies measuring 16 x 10 to 21 x 13 millimetres. All surfaces are ground. The anvil is made of hardened tool steel, the side lengths are 200 x 38 x 38 millimetres.

This scoring groove has ten half-round groove dies with diameters of 2.5 to 26 millimetres, seven V-grooves with widths of 2.5 to 11.5 millimetres and five flat dies with widths of 3 to 7 millimetres. All surfaces are ground and polished. The countersink is made of hardened tool steel, the side lengths are 62 x 62 x 50 mm.

This 8-piece set consists of six hammer punches with a round profile with head diameters of 7.5 to 24.5 mm, a hammer punch with a rectangular profile measuring 12 x 12 mm and a scoring groove.

The groove flank has 6 semicircular dies with diameters of 9.5 to 25 mm and a V-groove with a width of 11.5 mm.

Both the punches and the scoring groove are made of tool steel, hardened and ground.

This universal punch set made of tool steel contains ten cylindrical punches in diameters of 2 to 24 millimetres, five square profile punches in 2 x 2 to 6 x 6 millimetres and a 45° profile punch 12 x 12 millimetres. The groove flank has ten semi-circular groove dies in diameters of 2.5 to 26 millimetres, seven V-grooves from 2.5 to 11.5 millimetres wide and five flat dies in widths of 3 to 7 millimetres. The countersunk surfaces and dies are ground and polished. The anvil is made of hardened tool steel, the side lengths are 62 x 62 x 50 mm. The beech wood stand included in the scope of delivery is used to store the punches and anvil in a clearly organised manner.

This universal punch set made of tool steel contains ten cylindrical punches in diameters of 2 to 24 millimetres, five square profile punches in 2 x 2 to 6 x 6 millimetres and a 45° profile punch 12 x 12 millimetres. The groove flank has ten semi-circular groove dies in diameters of 2.5 to 26 millimetres, seven V-grooves from 2.5 to 11.5 millimetres wide and five flat dies in widths of 3 to 7 millimetres. The anvil is made of hardened tool steel, the side lengths are 62 x 62 x 50 mm. The beechwood stand included in the scope of delivery is used to store the punches and anvil in a clearly organised manner.