Clamping angle 90° 155 x 115 x 125 mm
Intended use
A clamping angle is used, among other things, to align a workpiece perpendicular to the machine table. To do this, the clamping bracket is mounted on the machine table and the workpiece is attached to the bracket using the clamping grooves. Clamping brackets are also used for marking and testing work on a levelling plate.
Technical data
| Dimensions [mm]: | 155 x 115 x 125 |
|---|---|
| Dimensions of transverse clamping slots [mm]: | 10,5 x 28 |
| Flatness [mm]: | 0,01 |
| Net weight [kg]: | 6,14 |
| Number of T-slots: | 3 |
| Number of longitudinal clamping slots: | 4 |
| Size of the T-slots [mm]: | 10 (M8), 12 (M10) |
| T-slot spacing [mm]: | 40 |
| Wall thickness [mm]: | 30 |
| Material: | Grey cast iron |
| Material: | Grey cast iron |
Very solid design (wall thickness 30 mm) with stiffening rib
Four transverse clamping slots for M10 screws
Three T-slots for M8 sliding blocks
Precisely ground
Made from grey cast iron
Description of the
This clamping bracket is made of grey cast iron. It is characterised by solid workmanship and has a central stiffening rib and a wall thickness of 30 mm. Four cross slots and three continuous T-slots for M10 T-nuts are used to attach the clamping bracket to a work table and clamp a workpiece to it. The support, clamping and end faces are ground at a 90° angle to each other.
Scope of delivery
- 1 x clamping angle 90° 155 x 115 x 125 mm
More about the brand and products from
