Clamping claw set 10-piece M10 / 12 mm
Intended use
This 10-piece clamping claw set for 12 mm T-slot width and M10 thread is used for quick and secure clamping of workpieces, tools and fixtures.
Technical data
| Clamping height (max.) [mm]: | 64 |
|---|---|
| Hardness [HRC]: | 32 |
| Tool material: | C45E steel |
10-piece clamping claw set for 12 mm T-slot width and M10 thread
For quick and secure clamping of workpieces, tools and fixtures
Material: the individual components are made of C45 heat-treated steel (material number 1.0503) and have undergone heat treatment (increased tensile strength)
Max. Clamping height: 64 mm
Hardness specifications from the manufacturer: 32 HRC
Description of the
10-piece clamping claw set for 12 mm T-slot width and M10 thread.
This set is used for quick clamping of workpieces, tools or fixtures.
Material properties
The individual components in this set are made from C45 heat-treated steel (material number 1.0503) and have undergone heat treatment. Among other things, this leads to an increase in tensile strength.manufacturer's hardness specifications for all components: 32 HRC
Assembly
The clamping element (step block) with a slotted hole is fastened so that one end rests on the body to be clamped and the other end rests on a step clamp. The stud bolt is attached as close as possible to the workpiece and fixed at the lower end to a plate or the machine table. A collar nut is fitted to the upper end of the stud bolt. This applies the clamping force by tightening it firmly so that the workpiece can no longer slip. This allows you to work safely and quickly on the workpiece.
The clamping claw set can be used for workpieces with a maximum height of 64 mm
Scope of delivery
- 2 x T-nuts
- 2 x collar nuts
- 2 x step clamps
- 2 x step blocks with trapezoidal teeth
- 2 x stud bolts
More about the brand and products from
