Clamping claw set 10-piece M8 / 10 mm
€16.50*
Prices incl. 19% VAT. plus Shipping costs
Delivery time: 1-3 working days **
More than 10 pieces available (online and in specialist shops)
Intended use
This 10-piece clamping claw set for 10 mm T-slot width and M8 thread is used for quick and secure clamping of workpieces, tools and fixtures.
Technical data
| Clamping height (max.) [mm]: | 64 |
|---|---|
| Hardness [HRC]: | 32 |
| Tool material: | C45E steel |
10-piece clamping claw set for 10 mm T-slot width and M8 thread
For fast and secure clamping of workpieces, tools and fixtures
Material: the individual components are made of C45 heat-treated steel (material number 1.0503) and have undergone heat treatment (increased tensile strength)
Max. Clamping height: 64 mm
Hardness specifications of the manufacturer: 32 HRC
Description of the
10-piece clamping claw set for 10 mm T-slot width and M8 thread.
This set is used for quick clamping of workpieces, tools or fixtures.
Material properties
The individual components in this set are made from C45 heat-treated steel (material number 1.0503) and have undergone heat treatment. Among other things, this leads to an increase in tensile strength.manufacturer's hardness specifications for all components: 32 HRC
Assembly
The clamping element (step block) with a slotted hole is fastened so that one end rests on the body to be clamped and the other end rests on a step clamp. The stud bolt is attached as close as possible to the workpiece and fixed at the lower end to a plate or the machine table. A collar nut is fitted to the upper end of the stud bolt. This applies the clamping force by tightening it firmly so that the workpiece can no longer slip. This allows you to work safely and quickly on the workpiece.
The clamping claw set can be used for workpieces with a maximum height of 64 mm.
Scope of delivery
- 2 x T-nuts
- 2 x collar nuts
- 2 x step clamps
- 2 x step blocks with trapezoidal teeth
- 2 x stud bolts
More about the brand and products from
10-piece clamping claw set for 10 mm T-slot width and M8 thread.
This set is used for quick clamping of workpieces, tools or fixtures.
Material properties
The individual components in this set are made from C45 heat-treated steel (material number 1.0503) and have undergone heat treatment. Among other things, this leads to an increase in tensile strength.manufacturer's hardness specifications for all components: 32 HRC
Assembly
The clamping element (step block) with a slotted hole is fastened so that one end rests on the body to be clamped and the other end rests on a step clamp. The stud bolt is attached as close as possible to the workpiece and fixed at the lower end to a plate or the machine table. A collar nut is fitted to the upper end of the stud bolt. This applies the clamping force by tightening it firmly so that the workpiece can no longer slip. This allows you to work safely and quickly on the workpiece.
The clamping claw set can be used for workpieces with a maximum height of 64 mm.
The individual components in this set are made of C235 steel and cast steel.
Assembly (see image "Assembly example")
The clamping arm (also known as a clamping claw) with a slotted hole is attached so that one end rests on the body to be clamped. The other end rests on a support, the step block. The threaded rod is attached as close as possible to the workpiece and fixed at the lower end to a plate or the machine table using a T-slot nut. A collar nut is fitted to the upper end of the stud bolt. This applies the clamping force by tightening it firmly. This means that the workpiece can no longer slip and work on the workpiece can be carried out safely and quickly.
The clamping claw set has a maximum clamping height of 64 mm.
The individual clamping elements are neatly stored in the practical wall holder.
This 10-piece clamping claw set with M6 thread for 8 mm T-slot width is suitable for secure and fast clamping of workpieces, tools and fixtures, especially on our dividing heads.
The set is suitable for the following dividing heads:
- Rotary indexing table Ø 80 mm horizontal / vertical (item no. 16200)
- Rotary indexing table Ø 80 mm swivelling horizontal / vertical (item no. 16201)
- Rotary table dividing head Ø 100 mm horizontal / vertical (item no. 16202)
- Rotary table dividing head Ø 100 mm swivelling horizontal / vertical (item no. 16203)
- Rotary indexing table Ø 105 mm swivelling horizontal / vertical (item no. 16205)
The clamping element with a slotted hole (also known as a clamping claw) is attached so that one end rests on the body to be clamped. The other end rests on a support, the step block. The threaded rod is attached as close as possible to the workpiece and fixed at the lower end to one of our rotary tables (item no. 16200, 16201, 16202, 16203 or 16205) using a T-slot nut. A collar nut is fitted to the upper end of the stud bolt. This applies the clamping force by tightening it firmly. Now the workpiece can no longer slip and you can carry out your work safely and quickly.
The clamping claw set can be used for workpieces with a maximum height of 20 mm.
Please note that the clamping claw set is not compatible with the VERTEX rotary tables!
This 10-piece clamping claw set with M6 thread is suitable for secure and fast clamping of workpieces, tools and fixtures.
Material properties
The individual components in this set are made from C45 heat-treated steel (material number 1.0503) and have undergone heat treatment. Among other things, this leads to an increase in tensile strength.
Manufacturer's hardness specifications for all components: 32 HRC
Assembly
The clamping element (step block) with a slotted hole is fastened so that one end rests on the body to be clamped and the other end rests on a step clamp. The stud bolt is attached as close as possible to the workpiece and fixed at the lower end to a plate or the machine table. A collar nut is fitted to the upper end of the stud bolt. This applies the clamping force by tightening it firmly so that the workpiece can no longer slip. This allows you to work safely and quickly on the workpiece.
The clamping claw set can be used for workpieces with a maximum height of 64 mm.
The individual components in this set are made from C45 heat-treated steel (material number 1.0503) and have undergone heat treatment. Among other things, this leads to an increase in tensile strength.
Assembly (see picture "Assembly example")
The clamping arm (also known as a clamping claw) with a slotted hole is fastened so that one end rests on the body to be clamped. The other end rests on a support, the step block. The threaded rod is attached as close as possible to the workpiece and mounted at the lower end on a plate or the machine table. This applies the clamping force by tightening it firmly. This prevents the workpiece from slipping. This allows you to carry out your work on the workpiece safely and quickly.
The clamping claw set has a maximum clamping height of 64 mm.
The individual clamping elements are neatly stored in the practical plastic case.
The individual components in this set are made of C235 steel and cast steel.
Assembly (see image "Assembly example")
The clamping arm (also known as a clamping claw) with a slotted hole is attached so that one end rests on the body to be clamped. The other end rests on a support, the step block. The threaded rod is attached as close as possible to the workpiece and fixed at the lower end to a plate or the machine table using a T-slot nut. A collar nut is fitted to the upper end of the stud bolt. This applies the clamping force by tightening it firmly. This means that the workpiece can no longer slip and work on the workpiece can be carried out safely and quickly.
The clamping claw set has a maximum clamping height of 64 mm.
The individual clamping elements are neatly stored in the practical wall holder.
The individual components in this set are made of C235 steel and cast steel.
Assembly (see image "Assembly example")
The clamping arm (also known as a clamping claw) with a slotted hole is attached so that one end rests on the body to be clamped. The other end rests on a support, the step block. The threaded rod is attached as close as possible to the workpiece and fixed at the lower end to a plate or the machine table using a T-slot nut. A collar nut is fitted to the upper end of the stud bolt. This applies the clamping force by tightening it firmly. This means that the workpiece can no longer slip and work on the workpiece can be carried out safely and quickly.
The clamping claw set has a maximum clamping height of 64 mm.
The individual clamping elements are neatly stored in the practical wall holder.
The individual components in this set are made from C45 heat-treated steel (material number 1.0503) and have undergone heat treatment. Among other things, this leads to an increase in tensile strength.
Assembly (see picture "Assembly example")
The clamping arm (also known as a clamping claw) with a slotted hole is fastened so that one end rests on the body to be clamped. The threaded rod is attached as close as possible to the workpiece and fastened at the lower end to a plate or the machine table using a T-nut. A collar nut is fitted to the upper end of the stud bolt. This applies the clamping force by tightening it firmly. This prevents the workpiece from slipping. This allows you to work on the workpiece safely and quickly.
The clamping claw set has a maximum clamping height of 64 mm.
The individual clamping elements are neatly stored in the practical plastic case.
10-piece clamping claw set for 12 mm T-slot width and M10 thread.
This set is used for quick clamping of workpieces, tools or fixtures.
Material properties
The individual components in this set are made from C45 heat-treated steel (material number 1.0503) and have undergone heat treatment. Among other things, this leads to an increase in tensile strength.manufacturer's hardness specifications for all components: 32 HRC
Assembly
The clamping element (step block) with a slotted hole is fastened so that one end rests on the body to be clamped and the other end rests on a step clamp. The stud bolt is attached as close as possible to the workpiece and fixed at the lower end to a plate or the machine table. A collar nut is fitted to the upper end of the stud bolt. This applies the clamping force by tightening it firmly so that the workpiece can no longer slip. This allows you to work safely and quickly on the workpiece.
The clamping claw set can be used for workpieces with a maximum height of 64 mm
The individual components in this set are made from C45 heat-treated steel (material number 1.0503) and have undergone heat treatment. Among other things, this leads to an increase in tensile strength.
Assembly (see picture "Assembly example")
The clamping arm (also known as a clamping claw) with a slotted hole is fastened so that one end rests on the body to be clamped. The other end rests on a support, the step block. The threaded rod is attached as close as possible to the workpiece and fixed at the lower end to a plate or the machine table using a T-slot nut. A collar nut is fitted to the upper end of the stud bolt. This applies the clamping force by tightening it firmly. This prevents the workpiece from slipping. This allows you to work on the workpiece safely and quickly.
The clamping claw set has a maximum clamping height of 70 mm.
The individual clamping elements are neatly stored in the practical plastic case.
The individual components in this set are made of C235 steel and cast steel.
Assembly (see picture "Assembly example")
The clamp with a slotted hole (also known as a clamping claw) is attached so that one end rests on the body to be clamped. The other end rests on a support, the step block. The threaded rod is attached as close as possible to the workpiece and fixed at the lower end to a plate or the machine table using a T-slot nut. A collar nut is fitted to the upper end of the stud bolt. This applies the clamping force by tightening it firmly. This means that the workpiece can no longer slip and work on the workpiece can be carried out safely and quickly.
The clamping claw set has a maximum clamping height of 70 mm.
The individual clamping elements are neatly stored in the practical wall holder.
10-piece clamping claw set for 14 mm T-slot width and M12 thread.
This set is used for quick clamping of workpieces, tools or fixtures.
Material properties
The individual components in this set are made from C45 heat-treated steel (material number 1.0503) and have undergone heat treatment. Among other things, this leads to an increase in tensile strength.manufacturer's hardness specifications for all components: 32 HRC
Assembly
The clamping element (step block) with a slotted hole is fastened so that one end rests on the body to be clamped and the other end rests on a step clamp. The stud bolt is attached as close as possible to the workpiece and fixed at the lower end to a plate or the machine table. A collar nut is fitted to the upper end of the stud bolt. This applies the clamping force by tightening it firmly so that the workpiece can no longer slip. This allows you to work safely and quickly on the workpiece.
The clamping claw set can be used for workpieces with a maximum height of 70 mm
€16.50*
Content: 1 pcs
€25.50*
Content: 1 pcs
€13.00*
Content: 1 Piece
€15.50*
Content: 1 pcs
€36.50*
Content: 1 pcs
€30.00*
Content: 1 pcs
€33.00*
Content: 1 pcs
€39.50*
Content: 1 pcs
€18.00*
Content: 1 pcs
€42.50*
Content: 1 pcs
€36.00*
Content: 1 pcs
€26.00*
Content: 1 pcs
26 March 2025 10:43
Reicht zum Abspannen
Schneller Versand und immer über den Versandstatus informiert. Gute Gualität.
31 March 2022 05:00
Spannset i. O.. Gerne wieder.
Spannset i. O.. Gerne wieder.
30 January 2022 00:00
Schwere Qualiät, bin zufrieden.
Das Set ist sehr stabil und macht einen wertigen Eindruck. Allerdings habe ich es bisher nur testweise eingesezt, es ist für meinen Kreuztisch doch zu groß. Es wird aber noch auf einer anderen Maschine zum Einsatz kommen und bestimmt gute Dienste leisten.
7 January 2022 00:00
Spannpratzen-Set 10-teilig M8/M10
Das Gewinde der Muttern war nicht durchgeschnitten. Alle Gewinde wurden nachgeschnitten. Jetzt funktioniert es so wie ich es mir vorstelle. Das Preis-, Leistungsverhältnis ist in Ordnung.
16 January 2021 00:00
Good
Well made (a little bit too long for me) but all is good with them. thank you paulimot !
1 December 2020 00:00
Gutes Produkt
Machen was sie sollen. Sie Spannen und Pratzen
5 May 2020 00:00
Gute Qualität
Wie von Paulimot gewöhnt
1 January 2020 00:00
passt
gutes Preis-Leistungsverhältnis
29 April 2019 00:00
GUT!
Gut verarbeitet - macht, was es soll.
5 January 2018 00:00
Ware so wie beschrieben
Artikel ist von guter Qualität, bin zufrieden