Cross table made of aluminium 310 x 90 mm
€25.00*
% €30.50* (18.03% saved)Prices incl. 19% VAT. plus Shipping costs
Delivery time: 1-3 working days **
More than 10 pieces available (online and in specialist shops)
Intended use
A cross table is used on both milling and drilling machines. As a cross table can be moved in both the X and Y axes, the workpiece can be positioned exactly under the tool. This allows precise drilling and milling work to be carried out.
Technical data
| Material cross table: | Aluminium |
|---|---|
| Number of T-slots: | 3 |
| Scale division handwheels [mm]: | 0,05 |
| Size of the T-slots [mm]: | 8 |
| T-slot spacing [mm]: | 33,5 |
| Table size [mm]: | 310 x 90 |
| Total height [mm]: | 78 |
| X-axis travel [mm]: | 200 |
| Y-axis travel [mm]: | 52 |
Work table 310 x 90 mm made of aluminium
Dovetail guides can be adjusted backlash-free using pressure bars
Three continuous T-slots
Suitable for light drilling and routing work
Including clamping set
Description of the
This cross table is made of aluminium and is therefore particularly suitable for light drilling and milling work. The work table has three continuous T-slots with a width of 8 mm for T-nuts with an M6 thread. The workpiece is fixed in the desired position on the worktable using clamping claws, hold-down clamps or similar. The cross table can be moved in the X and Y directions using the handwheels fitted with a vernier. The travel distance can be read quickly and easily via a sliding measuring scale on the X-axis. The dovetail guides can be adjusted backlash-free using pressure bars. The spindle of the Y-axis is protected from falling chips by a cover.
Scope of delivery
- 1 x cross table 310 x 90 mm
- 2 x hand crank with screw
- 2 x clamping claw 55 x 20 x 4 mm
- 4 x hexagon head screw M8 x 40
- 4 x nut M8
- 1 x Allen key
More about the brand and products from
