Cut-off steel holder, shank height 10 mm, with HSS blade (8 % cobalt)
Intended use
A parting-off tool can be used either for parting off or for grooving. A major advantage of parting tool holders with HSS blades is that the blades can be resharpened depending on the application requirements. For example, the grooving width can be reduced or the angle changed by grinding the blade. The thinner the cutting edge, the more delicate the work can be. The holder also allows you to securely clamp and quickly adjust the holder.
Technical data
| Blade height [mm]: | 12 |
|---|---|
| Blade length [mm]: | 100 |
| Blade thickness [mm]: | 2,5 |
| Clamping shank [mm]: | 10 |
| Cobalt content in the material of the knife [%]: | 8 |
| Height of support to cutting edge [mm]: | 9,5 |
| Knife surface: | ground |
| Surface holder: | burnished |
| Tool material Knife: | HSS |
| Workpiece material: | Universal |
HSS blade: 2.5 x 12 x 100 mm
HSS blade with 8 % cobalt alloy for improved heat and wear resistance
Quick adjustment and secure clamping of the blade using three screws
Shank height of the holder: 10 mm
Customised grinding for universal steel processing
Description of the
In order to be able to carry out grooving and parting-off work, the parting-off steel holder is clamped in a steel holder. There are three clamping screws on the top of the holder, which can be tightened or loosened using the Allen key. This allows you to quickly and securely fasten the supplied HSS blade in the holder. Measuring 100 x 12 x 2.5 mm, the parting-off blade is particularly suitable for parting off and grooving during your turning work.
The blade can be sharpened or ground depending on the intended use. For example, the grooving width can be reduced or the measuring angle changed. This enables universal material processing.
The narrower the cutting edge, the finer the work that can be carried out. Please note that reducing the blade width also increases the risk of vibrations at higher pressure.
The eight per cent cobalt alloy of the HSS blade also increases the heat and wear resistance and therefore the service life of the blade.
Please note that the blade is already pre-ground, but the chip breaker still needs to be ground in.
Scope of delivery
- 1 x parting-off tool holder with shank height 10 mm
- 1 x HSS blade 8 % cobalt alloyed
- 1 x hexagon socket spanner
More about the brand and products from
