Cutter head 40 mm with 3 inserts (TiAlN-coated)

The cutter head is suitable for face or shoulder milling of surfaces. The diameter of the cutter is 40 mm. The cutter head is nickel-coated. This nickel coating provides excellent corrosion protection. Nickel is resistant to air, water, diluted acids, lubricants and most alkalis. Another feature of the nickel surfaces is the visual enhancement of the cutterhead, which is fitted with three TiAlN-coated indexable inserts. The advantages and properties of the titanium-aluminium-nitride coating (TiAlN coating):Titanium-aluminium-nitride (TiAlN) is a compound of the elements titanium, aluminium and nitrogen. A key feature of this coating is its high resistance to heat hardening and oxidation. This coating is intended for use in the machining of hard and tough materials and therefore for high machining temperatures. The TiAlN coating can be used to machine hardened, alloyed steels and cast iron.

The cutter head is suitable for face or shoulder milling of surfaces. The diameter of the cutter is 50 mm. The cutter head is nickel-coated. This nickel coating offers excellent corrosion protection. Nickel is resistant to air, water, diluted acids, lubricants and most alkalis. Another feature of the nickel surfaces is the visual enhancement of the cutterhead, which is fitted with four TiAlN-coated indexable inserts. The advantages and properties of the titanium-aluminium-nitride coating (TiAlN coating):Titanium-aluminium-nitride (TiAlN) is a compound of the elements titanium, aluminium and nitrogen. A key feature of this coating is its high resistance to heat hardening and oxidation. This coating is intended for use in the machining of hard and tough materials and therefore for high machining temperatures. The TiAlN coating can be used to machine hardened, alloyed steels and cast iron.

The cutter head is suitable for face or shoulder milling (radius 6 mm) of surfaces. The diameter of the cutter is 50 mm. The cutter head is nickel-coated. This nickel coating offers excellent corrosion protection. Nickel is resistant to air, water, diluted acids, lubricants and most alkalis. Another feature of the nickel surfaces is the visual enhancement of the cutterhead, which is fitted with five TiAlN-coated indexable inserts. The advantages and properties of the titanium-aluminium-nitride coating (TiAlN coating):Titanium-aluminium-nitride (TiAlN) is a compound of the elements titanium, aluminium and nitrogen. A key feature of this coating is its high resistance to heat hardening and oxidation. This coating is intended for use in the machining of hard and tough materials and therefore for high machining temperatures. The TiAlN coating allows hardened, alloyed steels and cast iron to be machined. One advantage of cutterheads with round inserts (if they are only used for face milling) is that the inserts can be used around the entire circumference. This means that if the round cutting insert is worn at one point, it is only turned a little further. In contrast, a square insert can only be turned once or twice.

The cutter head is suitable for face or shoulder milling of surfaces. The diameter of the cutter is 63 mm. The cutter head is nickel-coated. This nickel coating provides excellent corrosion protection. Nickel is resistant to air, water, diluted acids, lubricants and most alkalis. Another feature of the nickel surfaces is the visual enhancement of the cutterhead, which is fitted with five TiAlN-coated indexable inserts. The advantages and properties of the titanium-aluminium-nitride coating (TiAlN coating):Titanium-aluminium-nitride (TiAlN) is a compound of the elements titanium, aluminium and nitrogen. A key feature of this coating is its high resistance to heat hardening and oxidation. This coating is intended for use in the machining of hard and tough materials and therefore for high machining temperatures. The TiAlN coating can be used to machine hardened, alloyed steels and cast iron.

The cutter head is suitable for face or shoulder milling (radius 6 mm) of surfaces. The diameter of the cutter is 63 mm. The cutter head is nickel-coated. This nickel coating offers excellent corrosion protection. Nickel is resistant to air, water, diluted acids, lubricants and most alkalis. Another feature of the nickel surfaces is the visual enhancement of the cutterhead, which is fitted with five TiAlN-coated indexable inserts. The advantages and properties of the titanium-aluminium-nitride coating (TiAlN coating):Titanium-aluminium-nitride (TiAlN) is a compound of the elements titanium, aluminium and nitrogen. A key feature of this coating is its high resistance to heat hardening and oxidation. This coating is intended for use in the machining of hard and tough materials and therefore for high machining temperatures. The TiAlN coating allows hardened, alloyed steels and cast iron to be machined. One advantage of cutterheads with round inserts (if they are only used for face milling) is that the inserts can be used around the entire circumference. This means that if the round cutting insert is worn at one point, it is only turned a little further. In contrast, a square insert can only be turned once or twice.

The cutter head is suitable for face and shoulder milling of surfaces. The diameter of the cutter is 80 mm. The cutter head is nickel-coated. This nickel coating offers excellent corrosion protection. Nickel is resistant to air, water, diluted acids, lubricants and most alkalis. Another feature of the nickel surfaces is the visual enhancement of the cutterhead, which is fitted with five TiAlN-coated indexable inserts. The advantages and properties of the titanium-aluminium-nitride coating (TiAlN coating):Titanium-aluminium-nitride (TiAlN) is a compound of the elements titanium, aluminium and nitrogen. A key feature of this coating is its high resistance to heat hardening and oxidation. This coating is intended for use in the machining of hard and tough materials and therefore for high machining temperatures. The TiAlN coating can be used to machine hardened, alloyed steels and cast iron.

The cutter head is suitable for face or shoulder milling (radius 6 mm) of surfaces. The diameter of the cutter is 80 mm. The cutter head is nickel-coated. This nickel coating offers excellent corrosion protection. Nickel is resistant to air, water, diluted acids, lubricants and most alkalis. Another feature of the nickel surfaces is the visual enhancement of the cutterhead, which is fitted with six TiAlN-coated indexable inserts. The advantages and properties of the titanium-aluminium-nitride coating (TiAlN coating):Titanium-aluminium-nitride (TiAlN) is a compound of the elements titanium, aluminium and nitrogen. A key feature of this coating is its high resistance to heat hardening and oxidation. This coating is intended for use in the machining of hard and tough materials and therefore for high machining temperatures. The TiAlN coating allows hardened, alloyed steels and cast iron to be machined. One advantage of cutterheads with round inserts (if they are only used for face milling) is that the inserts can be used around the entire circumference. This means that if the round cutting insert is worn at one point, it is only turned a little further. In contrast, a square insert can only be turned once or twice.

Milling head / cutter head Ø approx. 25 mm with 2 cutting inserts

tool holder MK2 / M10
incl. 2 indexable inserts

The matching indexable insert can be found under item number 13430.

Milling head / cutter head Ø approx. 30 mm with 2 cutting inserts

Tool holder MK3 / M12
incl. 2 indexable inserts

The matching indexable insert can be found under item number 13431.

This impact-tooth milling cutter with HSS insert is a milling tool for milling machines. It is suitable for face milling, aligning and machining flat workpiece surfaces and can be used for general milling work in workshops, mechanical engineering, model making and metalworking. The milling cutter features an SK30 shank for quick mounting in compatible milling machines or tool holders. Its 50 mm cutting diameter makes it ideal for machining small to medium-sized surfaces, ensuring precise material removal during face milling and finishing operations. An HSS insert measuring 8 x 8 x 85 mm is used as the cutting insert. HSS is suitable for many traditional machining tasks and offers a good combination of toughness, cutting performance and re-sharpenability. This makes the impact-tooth milling cutter particularly appealing to users seeking a simple, robust and versatile milling tool. The impact-tooth milling cutter can be used for machining flat surfaces, adapting workpieces, finishing clamping surfaces or for general face milling. The single-insert configuration ensures user-friendly operation, making this tool a practical addition for everyday milling tasks in the workshop. The impact-tooth milling cutter is supplied with HSS cutting inserts as shown.

This milling head / cutter head with MK3 shank is suitable for face and shoulder milling. It is not suitable for plunging into a workpiece. Thanks to its MK3 shank, this milling cutter can be inserted directly into the tool holder; no additional milling arbour is required.

This mini fly cutter set consists of three fly cutters with different head diameters including matching HSS inserts. The impact cutters are made of burnished steel. The cylindrical clamping shanks make them suitable for use in drilling / boring heads. The rake and flank faces of the HSS inserts are already pre-ground. To achieve optimum results, the chip grooves must be ground before use. The HSS inserts have a clamping surface for a better hold in the impact milling cutter.

This set is supplied with a wooden storage cube.