Cutter head 50 mm + 20 x replacement cutting insert
€122.00*
% €146.00* (16.44% saved)Prices incl. 19% VAT. plus Shipping costs
Currently not available
Intended use
Cutter heads are mainly used for face milling of surfaces, as their larger milling diameter means fewer passes are required compared to shank cutters. They can also be used to mill steps on surfaces. Key advantages of milling heads over, for example, HSS roller face milling cutters are the standardised indexable inserts, which enable very high cutting performance to be achieved. Depending on the material to be machined, inserts with different coatings can be used. Cutter heads are used in conjunction with a milling arbor.
Technical data
| Number of cutting edges: | 4 |
|---|---|
| Number of cutting edges: | 4 |
| Standard designation Cutting insert: | TPGW160308 |
| Surface coating of cutting insert: | TiAlN |
| Total height [mm]: | 40 |
| Ø cutter head [mm]: | 50 |
| Ø milling arbour holder [mm]: | 22 |
Cutter head surface-hardened by nickel plating
Includes 20 replacement cutting inserts
Four cutting inserts
TiAlN-coated cutting inserts
For practical and proper storage in a high-quality aluminium box
Description of the
The cutter head from this set is suitable for face or shoulder milling of surfaces. The diameter of the cutter is 50 mm.
The set consists of a cutter head and 20 matching indexable inserts. The cutter head itself is nickel-coated. This nickel coating provides excellent corrosion protection. Nickel is resistant to air, water, diluted acids, lubricants and most alkalis. Another feature of the nickel surfaces is the visual enhancement of the cutter head.
The cutterhead is fitted with five TiAlN-coated indexable inserts. The advantages and properties of the titanium-aluminium-nitride coating (TiAlN coating): Titanium-aluminium-nitride (TiAlN) is a compound of the elements titanium, aluminium and nitrogen. A key feature of this coating is its high resistance to heat hardening and oxidation. This coating is intended for use in the machining of hard and tough materials and therefore for high machining temperatures. The TiAlN coating can be used to machine hardened, alloyed steels and cast iron.
Scope of delivery
- 1 x 50 mm cutter head
- 20 x cutting insert TPGW160308
- 2 x storage boxes, each holding 10 cutting plates
- 1 x Torx key
- 1 x M10 x 30 screw for connection to a milling arbor
- 1 x aluminium storage box
More about the brand and products from
The cutter head from this set is suitable for face or shoulder milling of surfaces. The diameter of the cutter is 50 mm.
The set consists of a cutter head and 20 matching indexable inserts. The cutter head itself is nickel-coated. This nickel coating provides excellent corrosion protection. Nickel is resistant to air, water, diluted acids, lubricants and most alkalis. Another feature of the nickel surfaces is the visual enhancement of the cutter head.
The cutterhead is fitted with five TiAlN-coated indexable inserts. The advantages and properties of the titanium-aluminium-nitride coating (TiAlN coating): Titanium-aluminium-nitride (TiAlN) is a compound of the elements titanium, aluminium and nitrogen. A key feature of this coating is its high resistance to heat hardening and oxidation. This coating is intended for use in the machining of hard and tough materials and therefore for high machining temperatures. The TiAlN coating can be used to machine hardened, alloyed steels and cast iron.
The cutter head from this set is suitable for face or shoulder milling (radius 6 mm) of surfaces. The diameter of the cutter is 50 mm.
The set consists of a cutter head and 20 matching indexable inserts. The cutter head itself is nickel-coated. This nickel coating provides excellent corrosion protection. Nickel is resistant to air, water, diluted acids, lubricants and most alkalis. Another feature of the nickel surfaces is the visual enhancement of the cutter head.
The cutterhead is fitted with five TiAlN-coated indexable inserts. The advantages and properties of the titanium-aluminium-nitride coating (TiAlN coating): Titanium-aluminium-nitride (TiAlN) is a compound of the elements titanium, aluminium and nitrogen. A key feature of this coating is its high resistance to heat hardening and oxidation. This coating is intended for use in the machining of hard and tough materials and therefore for high machining temperatures. The TiAlN coating allows hardened, alloyed steels and cast iron to be machined.
One advantage of cutterheads with round inserts (if they are only used for face milling) is that the inserts can be used around the entire circumference. This means that if the round cutting insert is worn at one point, it is only turned a little further. In contrast, a square insert can only be turned once or twice.
The cutter head from this set is suitable for face or shoulder milling of surfaces. The diameter of the cutter is 40 mm.
The set consists of a cutter head and 20 matching indexable inserts. The cutter head itself is nickel-coated. This nickel coating provides excellent corrosion protection. Nickel is resistant to air, water, diluted acids, lubricants and most alkalis. Another feature of the nickel surfaces is the visual enhancement of the cutter head.
The cutterhead is fitted with five TiAlN-coated indexable inserts. The advantages and properties of the titanium-aluminium-nitride coating (TiAlN coating): Titanium-aluminium-nitride (TiAlN) is a compound of the elements titanium, aluminium and nitrogen. A key feature of this coating is its high resistance to heat hardening and oxidation. This coating is intended for use in the machining of hard and tough materials and therefore for high machining temperatures. The TiAlN coating can be used to machine hardened, alloyed steels and cast iron.
The cutter head is suitable for face or shoulder milling (radius 6 mm) of surfaces. The diameter of the cutter is 50 mm. The cutter head is nickel-coated. This nickel coating offers excellent corrosion protection. Nickel is resistant to air, water, diluted acids, lubricants and most alkalis. Another feature of the nickel surfaces is the visual enhancement of the cutterhead, which is fitted with five TiAlN-coated indexable inserts. The advantages and properties of the titanium-aluminium-nitride coating (TiAlN coating):Titanium-aluminium-nitride (TiAlN) is a compound of the elements titanium, aluminium and nitrogen. A key feature of this coating is its high resistance to heat hardening and oxidation. This coating is intended for use in the machining of hard and tough materials and therefore for high machining temperatures. The TiAlN coating allows hardened, alloyed steels and cast iron to be machined. One advantage of cutterheads with round inserts (if they are only used for face milling) is that the inserts can be used around the entire circumference. This means that if the round cutting insert is worn at one point, it is only turned a little further. In contrast, a square insert can only be turned once or twice.
The cutter head is suitable for face or shoulder milling (radius 6 mm) of surfaces. The diameter of the cutter is 63 mm. The cutter head is nickel-coated. This nickel coating offers excellent corrosion protection. Nickel is resistant to air, water, diluted acids, lubricants and most alkalis. Another feature of the nickel surfaces is the visual enhancement of the cutterhead, which is fitted with five TiAlN-coated indexable inserts. The advantages and properties of the titanium-aluminium-nitride coating (TiAlN coating):Titanium-aluminium-nitride (TiAlN) is a compound of the elements titanium, aluminium and nitrogen. A key feature of this coating is its high resistance to heat hardening and oxidation. This coating is intended for use in the machining of hard and tough materials and therefore for high machining temperatures. The TiAlN coating allows hardened, alloyed steels and cast iron to be machined. One advantage of cutterheads with round inserts (if they are only used for face milling) is that the inserts can be used around the entire circumference. This means that if the round cutting insert is worn at one point, it is only turned a little further. In contrast, a square insert can only be turned once or twice.
The cutter head is suitable for face or shoulder milling (radius 6 mm) of surfaces. The diameter of the cutter is 80 mm. The cutter head is nickel-coated. This nickel coating offers excellent corrosion protection. Nickel is resistant to air, water, diluted acids, lubricants and most alkalis. Another feature of the nickel surfaces is the visual enhancement of the cutterhead, which is fitted with six TiAlN-coated indexable inserts. The advantages and properties of the titanium-aluminium-nitride coating (TiAlN coating):Titanium-aluminium-nitride (TiAlN) is a compound of the elements titanium, aluminium and nitrogen. A key feature of this coating is its high resistance to heat hardening and oxidation. This coating is intended for use in the machining of hard and tough materials and therefore for high machining temperatures. The TiAlN coating allows hardened, alloyed steels and cast iron to be machined. One advantage of cutterheads with round inserts (if they are only used for face milling) is that the inserts can be used around the entire circumference. This means that if the round cutting insert is worn at one point, it is only turned a little further. In contrast, a square insert can only be turned once or twice.
The cutter head is suitable for face or shoulder milling of surfaces. The diameter of the cutter is 40 mm. The cutter head is nickel-coated. This nickel coating provides excellent corrosion protection. Nickel is resistant to air, water, diluted acids, lubricants and most alkalis. Another feature of the nickel surfaces is the visual enhancement of the cutterhead, which is fitted with three TiAlN-coated indexable inserts. The advantages and properties of the titanium-aluminium-nitride coating (TiAlN coating):Titanium-aluminium-nitride (TiAlN) is a compound of the elements titanium, aluminium and nitrogen. A key feature of this coating is its high resistance to heat hardening and oxidation. This coating is intended for use in the machining of hard and tough materials and therefore for high machining temperatures. The TiAlN coating can be used to machine hardened, alloyed steels and cast iron.
The cutter head is suitable for face or shoulder milling of surfaces. The diameter of the cutter is 50 mm. The cutter head is nickel-coated. This nickel coating offers excellent corrosion protection. Nickel is resistant to air, water, diluted acids, lubricants and most alkalis. Another feature of the nickel surfaces is the visual enhancement of the cutterhead, which is fitted with four TiAlN-coated indexable inserts. The advantages and properties of the titanium-aluminium-nitride coating (TiAlN coating):Titanium-aluminium-nitride (TiAlN) is a compound of the elements titanium, aluminium and nitrogen. A key feature of this coating is its high resistance to heat hardening and oxidation. This coating is intended for use in the machining of hard and tough materials and therefore for high machining temperatures. The TiAlN coating can be used to machine hardened, alloyed steels and cast iron.
The cutter head is suitable for face or shoulder milling of surfaces. The diameter of the cutter is 63 mm. The cutter head is nickel-coated. This nickel coating provides excellent corrosion protection. Nickel is resistant to air, water, diluted acids, lubricants and most alkalis. Another feature of the nickel surfaces is the visual enhancement of the cutterhead, which is fitted with five TiAlN-coated indexable inserts. The advantages and properties of the titanium-aluminium-nitride coating (TiAlN coating):Titanium-aluminium-nitride (TiAlN) is a compound of the elements titanium, aluminium and nitrogen. A key feature of this coating is its high resistance to heat hardening and oxidation. This coating is intended for use in the machining of hard and tough materials and therefore for high machining temperatures. The TiAlN coating can be used to machine hardened, alloyed steels and cast iron.
The cutter head is suitable for face and shoulder milling of surfaces. The diameter of the cutter is 80 mm. The cutter head is nickel-coated. This nickel coating offers excellent corrosion protection. Nickel is resistant to air, water, diluted acids, lubricants and most alkalis. Another feature of the nickel surfaces is the visual enhancement of the cutterhead, which is fitted with five TiAlN-coated indexable inserts. The advantages and properties of the titanium-aluminium-nitride coating (TiAlN coating):Titanium-aluminium-nitride (TiAlN) is a compound of the elements titanium, aluminium and nitrogen. A key feature of this coating is its high resistance to heat hardening and oxidation. This coating is intended for use in the machining of hard and tough materials and therefore for high machining temperatures. The TiAlN coating can be used to machine hardened, alloyed steels and cast iron.
€122.00*
Content: 1 pcs
€152.00*
Content: 1 pcs
€114.00*
Content: 1 pcs
€66.90*
Content: 1 pcs
€74.50*
Content: 1 pcs
€85.90*
Content: 1 pcs
€48.50*
Content: 1 pcs
€56.90*
Content: 1 pcs
€68.50*
Content: 1 pcs
€78.50*
Content: 1 pcs
13 April 2026 11:03
Siehe oben
Siehe oben
2 April 2020 00:00
Schnelle Lieferung, guter Preis!
präzise Ausführung, funktioniert gut!