Dividing disc set for dividing head
€60.50*
% €63.00* (3.97% saved)Prices incl. 19% VAT. plus Shipping costs
Delivery time: 1-3 working days **
More than 10 pieces available (online and in specialist shops)
Intended use
Dividing discs for dividing heads are used for indirect dividing. This allows more complex shapes, such as a 7-edge on a shaft, to be produced. In indirect dividing, the handwheel of the dividing attachment, including the vernier, is replaced by the dividing disc unit.
Technical data
| Drill holes disc A: | 15, 16, 17, 18, 19, 20 |
|---|---|
| Drill holes disc B: | 21, 23, 27, 29, 31, 33 |
| Drill holes disc C: | 37, 39, 41, 43, 47, 49 |
| Partial disc thickness [mm]: | 6,5 |
| Ø centre hole [mm]: | 21 |
| Ø dividing discs [mm]: | 100 |
| Ø fixing holes [mm]: | 6 |
| Material: | Steel |
Dividing disc A, bolt hole circles: 15, 16, 17, 18, 19, 20
Dividing disc B, bolt hole circles: 21, 23, 27, 29, 31, 33
Dividing disc C, bolt hole circles: 37, 39, 41, 43, 47, 49
Including dividing crank with dividing pin, dividing shears and mounting screws
Description of the
The set includes three dividing discs (A, B and C) with a diameter of 100 mm, a dividing crank with dividing pin, a dividing shear and mounting screws. The dividing discs A, B and C have different bolt circles. Depending on the required graduation, one of the dividing discs, the dividing pin and the shears are mounted on the dividing head instead of the crank handle and vernier.
Scope of delivery
- 1 x dividing disc A
- 1 x dividing disc B
- 1 x dividing disc C
- 1 x dividing disc
- 1 x locking pin
- 1 x dividing crank
- 1 x levelling plate
- 3 x fixing screw M5 x 20
More about the brand and products from
21 April 2025 09:53
Alles wie beschrieben. Top!
Alles wie beschrieben. Top!