HSS manual reamer set 13-piece 2.0 – 10.0 mm fit H7
€61.50*
% €73.00* (15.75% saved)Prices incl. 19% VAT. plus Shipping costs
Delivery time: 1-3 working days **
More than 10 pieces available (online and in specialist shops)
Intended use
A reamer is used for the fine machining of bores. The bores, which should usually be drilled 0.1 to 0.2 mm below nominal size, can be reamed to their final size using a reamer. In the vast majority of cases, reamers are used to ream bores for dowel pins. Machining the bore in this way ensures a high degree of dimensional and geometric accuracy, as well as a high surface finish on the finished reamed bore.
Technical data
| Cutting length [mm]: | 14, 17, 18, 19, 21, 24, 26, 28, 30, 33, 36, 37 |
|---|---|
| Execution: | right-hand cutting |
| Tolerance class: | H7 |
| Total length [mm]: | 50, 58, 61, 75, 82, 87, 94, 95, 110, 118, 126, 135 |
| Ø reamers [mm]: | 2, 2,5, 3, 3,5, 4, 4,5, 5, 5,5, 6, 7, 8, 9, 10 |
| Material: | HSS |
13-piece set, in a wooden box for practical and safe storage
Tolerance class H7
Made from HSS steel
Right-hand cutting, straight cut
Cylindrical shank with square section
Description of the
This 13-piece HSS hand reamer set is supplied in a wooden box for practical and safe storage. All reamers in this set are subject to tolerance class H7. At the end of the cylindrical shaft there is a square for mounting in a tap wrench. The reamers in this set have a straight grind.
Scope of delivery
- 1 x hand reamer, Ø 2 mm
- 1 x hand reamer, Ø 2.5 mm
- 1 x hand reamer, Ø 3 mm
- 1 x hand reamer, Ø 3.5 mm
- 1 x hand reamer, Ø 4 mm
- 1 x hand reamer, Ø 4.5 mm
- 1 x hand reamer, Ø 5 mm
- 1 x hand reamer, Ø 5.5 mm
- 1 x hand reamer, Ø 6 mm
- 1 x hand reamer, Ø 7 mm
- 1 x hand reamer, Ø 8 mm
- 1 x hand reamer, Ø 9 mm
- 1 x hand reamer, Ø 10 mm
- 1 x wooden box with foam insert
More about the brand and products from
