SIEG machine vice swivelling, 125 mm jaw width
€80.00*
% €139.00* (42.45% saved)Prices incl. 19% VAT. plus Shipping costs
Delivery time: 1-3 working days **
Less than 10 pieces available (online and in specialist shops)
Intended use
A vice is used to clamp workpieces properly so that drilling and milling work on machine tools (e.g. drilling machines or drilling/milling machines) can be carried out safely.
Technical data
| Baking material: | C45E hardened steel, 40 - 52 HRC |
|---|---|
| Base body material: | Cast iron |
| Jaw height [mm]: | 42 |
| Jaw width [mm]: | 125 |
| Net weight [kg]: | 13,4 |
| Span (max.) [mm]: | 102 |
| Total height without turntable [mm]: | 94 |
| Total height with turntable [mm]: | 126 |
Solid design
360° rotatable
125 mm jaw width, maximum clamping width 102 mm
Quick alignment on the machine table thanks to guide blocks included in the scope of delivery
Vice can also be used without a turntable
Description of the
This machine vice is made of cast iron and is therefore characterised by a high dead weight. This results in increased stability of the vice during material processing.
The jaws of the vice are made of C45E steel and are also hardened.
The vice can be rotated through 360° and is mounted on a turntable with an angle scale. The set angle position can be fixed using two locking nuts. This allows angle milling to be carried out easily and conveniently. Using the guide blocks included in the scope of delivery, the vice can be quickly and easily aligned parallel to the T-slots in the worktable.
The vice can be mounted on the machine table via two 13.5 mm wide slotted holes, either with or without a rotary disc.
Scope of delivery
- 1 x SIEG machine vice, swivelling, 125 mm jaw width
- 1 x hand crank
- 2 x hammerhead screw M10 x 40 mm
- 2 x nut M10
- 2 x washer M10
More about the brand and products from
