Tapping attachment M3 to M12, MK3
€172.00*
Prices incl. 19% VAT. plus Shipping costs
Delivery time: 1-3 working days **
More than 10 pieces available (online and in specialist shops)
Intended use
A thread cutting device, also known as a thread cutting attachment or thread cutting chuck, is used for thread cutting on pillar drills that do not have a thread cutting function or clockwise and anti-clockwise rotation.
Technical data
| For taps: | M3 - M12 |
|---|---|
| Tool holder: | MK3 |
| Tool material: | Steel |
| Total length [mm]: | 240 |
| Weight [kg]: | 2,0 |
For taps from M3 to M12
Also suitable for intermediate sizes and inch sizes thanks to infinitely adjustable clamping chuck
Economical production of threads in through and blind holes
MK3 tool holder
Automatic direction reversal
Description of the
This tapping attachment can be used on pillar drills with an MK3 tool holder. The mechanism of the device reverses the direction of rotation of the clamped tap when idling. Only when the tap plunges into the workpiece does the surface friction in the coupling of the tapping attachment set the running direction of the tap equal to the running direction of the work spindle. When the pressure is removed from the spindle, the direction of rotation is reversed again. At the upper end of the tapping attachment there is a knurled adjusting ring with a guide value scale for stepless presetting of the torque. As a general machining tip, threads with a large diameter should be cut with a high torque and threads with a small diameter with a low torque. A screw-in stop is included in the scope of delivery.
Scope of delivery
- 1 x tapping attachment MK3
- 1 x Screw-in stop bar
- 2 x Insert pins for adjusting nut
- 1 x Hook spanner for clamping chuck
- 1 x Allen key
- 1 x Wooden box for practical storage
More about the brand and products from
15 November 2023 18:50
Daumen hoch
Habe schon öfter bei Paulimot bestellt und bin jedesmal sehr zufrieden gewesen. Auch der Versand zu mir nach Italien klappt super. Preis-Leistung "Top"
1 September 2022 18:21
Ich verwende die Gewindeschneidvorrichtung an meiner Kernbohrmaschine.
Ich verwende die Gewindeschneidvorrichtung an meiner Kernbohrmaschine. Funktioniert super. Durch die Baulänge wird es bei größeren Gewindebohrern sehr knapp.
28 January 2022 00:00
Super Service !
Produkt wurde schnell geliefert, eine ordentliche Holz Box zur Aufbewahrung, ausführliche Gebrauchsanleitung war auch dabei. Hab das Produkt noch nicht in Betrieb gehabt, aber die Ausführung und die erkennbare optische Qualität bestätigt meine Kaufentscheidung. Fazit : Preis - Leistung stimmt !