Vice for dividing heads Ø 100 mm, jaw width 80 mm
€29.50*
% €32.50* (9.23% saved)Prices incl. 19% VAT. plus Shipping costs
Delivery time: 1-3 working days **
More than 10 pieces available (online and in specialist shops)
Intended use
A vice is used to clamp workpieces properly so that drilling and milling work can be carried out safely on machine tools (e.g. drilling machines or drilling/milling machines).
Technical data
| Base area [mm]: | Ø 116 |
|---|---|
| Jaw height [mm]: | 20 |
| Jaw width [mm]: | 80 |
| Span (max.) [mm]: | 42 |
| Surface: | ground |
| Total height [mm]: | 33 |
| Material: | Steel |
80 mm jaw width, 42 mm maximum clamping width
Suitable for fine drilling and milling work
Movable jaw with vertical and horizontal prism for clamping cylindrical workpieces
For mounting on dividing heads
Includes four M5 sliding blocks and four M5 fastening screws
Description of the
This small vice, ground on all sides, is suitable for fine drilling and milling work. The arrangement of the four holes for the fixing screws included in the scope of delivery allows it to be mounted on dividing heads with three or four T-slots. The movable jaw, which is equipped with one horizontal and one vertical prism, can be moved and clamped via the spindle. The handle is knurled for a good grip. There is a cross hole at the end of the handle. A shaft with a corresponding diameter is installed in this cross hole, which is used as a lever to increase the clamping force.
Scope of delivery
- 1 x vice for dividing heads Ø 100 mm, jaw width 80 mm
- 4 x T-slot nut M5
- 4 x hexagon socket screw M5 x 16
More about the brand and products from
This small vice, ground on all sides, is suitable for fine drilling and milling work. The arrangement of the four holes for the fixing screws included in the scope of delivery allows it to be mounted on dividing heads with three or four T-slots. The movable jaw, which is equipped with one horizontal and one vertical prism, can be moved and clamped via the spindle. The handle is knurled for a good grip. There is a cross hole at the end of the handle. A shaft with a corresponding diameter is installed in this cross hole, which is used as a lever to increase the clamping force.
This small vice, ground on all sides, is suitable for fine drilling and milling work. The arrangement of the four holes for the fixing screws included in the scope of delivery allows it to be mounted on dividing heads with three or four T-slots. The movable jaw, which is equipped with one horizontal and one vertical prism, can be moved and clamped via the spindle. The handle is knurled for a good grip. There is a cross hole at the end of the handle. A shaft with a corresponding diameter is installed in this cross hole, which is used as a lever to increase the clamping force.
€29.50*
Content: 1 pcs
€29.00*
Content: 1 pcs
28 July 2023 04:41
Schraubstock
Der Schraubstock macht einen soliden und präzisen Eindruck, ich habe ihn allerdings noch nicht benutzt. Die Ware entspricht aber genau meinen Erwartungen und wurde wieder superschnell geliefert.
27 March 2023 08:01
sauber verarbeitet
gut verarbeiteter kleiner Schraubstock für meinen Teileapparat.
21 December 2022 12:14
Sehr gut
Sehr gut
21 January 2022 00:00
Tolles Zubehör
Guter Schraubstock für kleines Geld, perfekt für Teilapparat.
6 January 2022 00:00
Vice for rotary table
Well made and useful, however as one jaw is fixed it is difficult to get parts centralised on the rotary table, it would be better if both jaws moved therefore all parts would be automatically centralised in the vice.
24 December 2021 00:00
Schraubstock
Praktisch gute Qualität
25 November 2021 00:00
Schraubstock
Wie immer schnelle Lieferung. Ein muss für den Teilapparat.