Rotating mini centre point MK1
€15.00*
% €16.00* (6.25% saved)Prices incl. 19% VAT. plus Shipping costs
Delivery time: 1-3 working days **
More than 10 pieces available (online and in specialist shops)
Intended use
A centre punch (often also called a centre point or rolling centre punch) is one of the most important tools when working with a lathe. It is used to secure the tailstock so that long, thin and heavy workpieces can be machined safely and accurately. Centre punches are mainly used at higher speeds.
Technical data
| Base body material: | 100 Cr6 steel, burnished |
|---|---|
| Concentricity (max.) [mm]: | 0,005 |
| Material lace: | 100 Cr6 steel |
| Morse taper recording: | MK1 |
| Point angle [°]: | 60 |
| Speed (max.) [rpm]: | 3.000 |
| Total length [mm]: | 95 |
| Ø bearing housing [mm]: | 23 |
| Ø tip [mm]: | 10 |
One of the most important accessories for a lathe
For securing long, thin and heavy workpieces
High concentricity
Steel tip, hardened and ground
Further sizes (MK0 - MK4) in our range
Description of the
The steel tip is hardened and ground, which increases the resilience and service life of this item. The point angle of this centre point is 60°, as is usual for centre points.
In contrast to fixed centre points, the tip of live centre points rotates with the workpiece, which prevents friction and enables higher speeds.
We supply live centre points in sizes MK0 to MK4.
Scope of delivery
- 1 x Mini centre point MK1
More about the brand and products from
The steel tip is hardened and ground, which increases the resilience and service life of this item. The point angle of this centre point is 60°, as is usual for centre points.
In contrast to fixed centre points, the tip of live centre points rotates with the workpiece, which prevents friction and enables higher speeds.
We supply live centre points in sizes MK0 to MK4.
Adjustable centre point for taper turning for MK2 + MK3
this eliminates the need to realign the tailstock after cone or taper turning
- total length: 153 mm
- max. adjustment range: +/- 7 mm
- Ø centre: 24 mm
- Centre angle: 60°
The centre point has double bearings and therefore achieves a high concentricity of max. 0.007 mm. It can be used up to a speed of 1,500 rpm. The steel tip is hardened and ground, which increases the load capacity and service life of this item. The point angle of this centre point is 60°, as is usual for centre points.
In contrast to fixed centre points, the tip of live centre points rotates with the workpiece, which prevents friction and enables higher speeds.
We supply live centre points in sizes MK0 to MK4.
The centre point has double bearings and therefore achieves a high concentricity of max. 0.007 mm. It can be used up to a speed of 1500 rpm. The steel tip is hardened and ground, which increases the load capacity and service life of this item. The point angle of this centre point is 60°, as is usual for centre points.
In contrast to fixed centre points, the tip of live centre points rotates with the workpiece, which prevents friction and enables higher speeds.
We supply live centre points in sizes MK0 to MK4.
The centre point has double bearings and therefore achieves a high concentricity of max. 0.015 mm. It can be used up to a speed of 2,800 rpm. The steel tip is hardened and ground, which increases the load capacity and service life of this item. The point angle of this centre point is 60°, as is usual for centre points.
In contrast to fixed centre points, the tip of live centre points rotates with the workpiece, which prevents friction and enables higher speeds.
We supply live centre points in sizes MK0 to MK4.
The centre point has double bearings and therefore achieves a high concentricity of max. 0.007 mm. It can be used up to a speed of 1,500 rpm. The steel tip is hardened and ground, which increases the load capacity and service life of this item. The point angle of this centre point is 60°, as is usual for centre points.
In contrast to fixed centre points, the tip of live centre points rotates with the workpiece, which prevents friction and enables higher speeds.
We supply live centre points in sizes MK0 to MK4.
The centre point has double bearings and therefore achieves a high concentricity of max. 0.015 mm. It can be used up to a speed of 2,800 rpm. The steel tip is hardened and ground, which increases the load capacity and service life of this item. The point angle of this centre point is 60°, as is usual for centre points.
In contrast to fixed centre points, the tip of live centre points rotates with the workpiece, which prevents friction and enables higher speeds.
We supply live centre points in sizes MK0 to MK4.
The centre point has double bearings and therefore achieves a high concentricity of max. 0.015 mm. It can be used up to a speed of 2,800 rpm. The steel tip is hardened and ground, which increases the load capacity and service life of this item. The point angle of this centre point is 60°, as is usual for centre points.
In contrast to fixed centre points, the tip of live centre points rotates with the workpiece, which prevents friction and enables higher speeds.
We supply live centre points in sizes MK0 to MK4.
The centre point has double bearings and therefore achieves a high concentricity of max. 0.015 mm. It can be used up to a speed of 2,800 rpm. The steel tip is hardened and ground, which increases the load capacity and service life of this item. The point angle of this centre point is 60°, as is usual for centre points.
In contrast to fixed centre points, the tip of live centre points rotates with the workpiece, which prevents friction and enables higher speeds.
We supply live centre points in sizes MK0 to MK4.
The centre point has double bearings and therefore achieves a very high concentricity of max. 0.003 mm. It can be used up to a speed of 8,000 rpm. The steel tip is hardened and ground, which increases the load capacity and service life of this item. The point angle of this centre point is 60°, as is usual for centre points.
In contrast to fixed centre points, the tip of live centre points rotates with the workpiece, which prevents friction and enables higher speeds.
We supply live centre points in sizes MK0 to MK4.
The centre point has double bearings and therefore achieves a very high concentricity of max. 0.003 mm. It can be used up to a speed of 8,000 rpm. The steel tip is hardened and ground, which increases the load capacity and service life of this item. The point angle of this centre point is 60°, as is usual for centre points.
In contrast to fixed centre points, the tip of live centre points rotates with the workpiece, which prevents friction and enables higher speeds.
We supply live centre points in sizes MK0 to MK4.
The centre point has double bearings and therefore achieves a very high concentricity of max. 0.003 mm. It can be used up to a speed of 6,000 rpm. The steel tip is hardened and ground, which increases the load capacity and service life of this item. The point angle of this centre point is 60°, as is usual for centre points.
In contrast to fixed centre points, the tip of live centre points rotates with the workpiece, which prevents friction and enables higher speeds.
We supply live centre points in sizes MK0 to MK4.
The steel tip is hardened and ground, which increases the resilience and service life of this item. The point angle of this centre point is 60°, as is usual for centre points.
In contrast to fixed centre points, the tip of live centre points rotates with the workpiece, which prevents friction and enables higher speeds.
We supply live centre points in sizes MK0 to MK4.
€15.00*
Content: 1 pcs
€56.50*
Content: 1 Piece
€25.50*
Content: 1 Piece
€33.00*
Content: 1 Piece
€23.00*
Content: 1 pcs
€22.50*
Content: 1 Piece
€26.50*
Content: 1 pcs
€32.00*
Content: 1 pcs
€20.00*
Content: 1 pcs
€127.00*
Content: 1 Piece
€117.00*
Content: 1 Piece
€158.00*
Content: 1 Piece
€15.00*
Content: 1 pcs
20 February 2024 17:44
Alles tippi-toppi! Gute Ware und ein guter
Alles tippi-toppi! Gute Ware und ein guter Preis. Was will man mehr als Kunde :-)
7 March 2023 08:55
Super Qualität, schnelle Lieferung
Super Qualität, schnelle Lieferung
9 August 2022 12:19
Als Gegenhalter in kleinen Maschinen bestens geeignet
Eine mitlaufende Spitze unterstützt präzises Drehen deutlich besser als die feststehende Spitze. Diese hat einen exakten Rundlauf und dreht auch bei 3000 U/min geräuschlos und ohne warm zu werden mit.
31 January 2022 00:00
Gut
Für den Preis OK
31 January 2022 00:00
Gut
Preis Leistung OK
26 November 2021 00:00
Gute Ware, guter Preis. Alles i. O.
Gute Ware, guter Preis. Alles i. O.
12 September 2021 00:00
Preis /Leistung passt
Ein Muss für kleine Dreharbeiten. Je nach Aufnahme, an die Reduzierhülse denken.
11 May 2021 00:00
Alles Super, gerne wieder.
Alles Super, gerne wieder.
18 January 2021 00:00
Schnell und Gut
schnelle Lieferung, gute Qualität, entspricht meinen Erwartungen
14 January 2021 00:00
Alles OK!!!
Alles OK!!!