Precision quick-action drill chuck 1 - 13 mm MK2
€51.50*
Prices incl. 19% VAT. plus Shipping costs
Delivery time: 1-3 working days **
More than 10 pieces available (online and in specialist shops)
Intended use
Drill chucks are used to clamp tools with a cylindrical shank, such as drills, countersinks, reamers, etc. Drill chucks are used in machine tools such as lathes, milling machines or drilling machines. Depending on the type of machine, a drill chuck with a suitable holder is required. A general distinction is made between drill chucks in which the tools are clamped with a spanner and drill chucks in which the tools can be clamped without a spanner, so-called quick-action drill chucks.
Technical data
| Clamping range [mm]: | 1 - 13 |
|---|---|
| Concentricity deviation max. [mm]: | 0,05 |
| Cone mandrel: | MK2 |
| Total length [mm]: | 170 |
| Ø drill max. [mm]: | 13 |
Fast, secure clamping and unclamping
No clamping spanner required
Suitable for use on lathes and drills
For clamping tools with a cylindrical shank
Maximum concentricity deviation: 0.05 mm
Description of the
With this precision quick-action drill chuck, the taper arbor and the drill bit holder consist of one part, i.e. the taper arbor cannot be separated from the drill chuck. In contrast to drill chucks with an inserted tapered arbor, this design enables higher concentricity to be achieved. The taper arbor has a drive-out tab and is therefore suitable for use both in drilling machines and in the tailstock of lathes. The clamping range of this chuck is 1 to 13 mm. As the three clamping jaws close completely, it is also possible to clamp tools with a shank diameter of less than 1 mm.
Scope of delivery
- 1 x Precision quick-action drill chuck 1-13 mm MK2
More about the brand and products from
Further information on our professional line
With this precision quick-action drill chuck, the taper arbor and the drill bit holder consist of one part, i.e. the taper arbor cannot be separated from the drill chuck. In contrast to drill chucks with an inserted tapered arbor, this design enables higher concentricity to be achieved. The taper arbor has a drive-out tab and is therefore suitable for use both in drilling machines and in the tailstock of lathes. The clamping range of this chuck is 1 to 13 mm. As the three clamping jaws close completely, it is also possible to clamp tools with a shank diameter of less than 1 mm.
With this precision quick-action drill chuck, the taper arbor and the drill bit holder consist of one part, i.e. the taper arbor cannot be separated from the drill chuck. In contrast to drill chucks with an inserted tapered arbor, this design enables higher concentricity to be achieved. The taper arbor has a drive-out tab and is therefore suitable for use both in drilling machines and in the tailstock of lathes. The clamping range of this chuck is 1 to 16 mm. As the three clamping jaws close completely, it is also possible to clamp tools with a shank diameter of less than 1 mm.
This quick-action drill chuck is supplied with a tapered arbour. The taper arbor and drill chuck are connected to each other via a positive-locking B16 cone, i.e. the taper arbor can be separated from the drill chuck. The taper arbor has a drive-out tab and is therefore suitable for use both in drilling machines and in the tailstock of lathes. The clamping range of this chuck is 1 to 13 mm. As the three clamping jaws close completely, it is also possible to clamp tools with a shank diameter of less than 1 mm.
This quick-action drill chuck is supplied with a tapered arbour. The taper arbor and drill chuck are connected to each other via a positive-locking B18 cone, i.e. the taper arbor can be separated from the drill chuck. The taper arbor has a drive-out tab and is therefore suitable for use both in drilling machines and in the tailstock of lathes. The clamping range of this chuck is 1 to 16 mm. As the three clamping jaws close completely, it is also possible to clamp tools with a shank diameter of less than 1 mm.
This quick-release drill chuck has a locking mechanism that prevents the drill chuck from loosening during anti-clockwise rotation. As a result, unlike conventional quick-release drill chucks, this drill chuck is suitable for clockwise and anti-clockwise rotation. The chuck is locked and unlocked by turning the red ring to "LOCK" or "UNLOCK". The drill chuck is supplied with a tapered arbour. The taper arbor and drill chuck are connected to each other via a form-fit B16 cone, i.e. the taper arbor can be separated from the drill chuck. The taper arbor has a drive-out tab and is therefore suitable for use both in drilling machines and in the tailstock of lathes. The clamping range of this chuck is 1 to 13 mm. As the three clamping jaws close completely, it is also possible to clamp tools with a shank diameter of less than 1 mm.
This quick-release drill chuck has a locking mechanism that prevents the drill chuck from loosening during anti-clockwise rotation. As a result, unlike conventional quick-release drill chucks, this drill chuck is suitable for clockwise and anti-clockwise rotation. The chuck is locked and unlocked by turning the red ring to "LOCK" or "UNLOCK". The drill chuck is supplied with a tapered arbour. The taper arbor and drill chuck are connected to each other via a form-fit B18 cone, i.e. the taper arbor can be separated from the drill chuck. The taper arbor has a drive-out tab and is therefore suitable for use both in drilling machines and in the tailstock of lathes. The clamping range of this chuck is 1 to 16 mm. As the three clamping jaws close completely, it is also possible to clamp tools with a shank diameter of less than 1 mm.
€51.50*
Content: 1 Piece
€55.50*
Content: 1 Piece
€24.00*
Content: 1 pcs
€26.50*
Content: 1 pcs
€29.00*
Content: 1 pcs
€33.50*
Content: 1 pcs
11 December 2024 16:48
Bin sehr zufrieden,
Bin sehr zufrieden,
6 November 2023 16:42
Sehr präzises und leichtgängiges Futter
Sehr leichtgängig und äußerst präzise. Da sich die Spindel meiner Teknatool Nova Viking sehr leicht drehen lässt, war ich auf der Suche nach einem möglichst leichtgängigem Futter und das ist es definitv! Wie für die Maschine gemacht. Spannt zuverlässig und Bohrer laufen absolut rund. Es muss nicht immer Röhm sein. Andere Hersteller können auch anständige Futter bauen.
6 January 2023 11:52
Bohrfutter ist TOP !
Bohrfutter ist TOP !
3 August 2022 07:38
Erittäin hyvä hinta/laatu suhde.
Erittäin hyvä hinta/laatu suhde.
10 July 2022 16:26
Sehr gutes Spannfutter, schnelle Lieferug
Sehr gutes Spannfutter, schnelle Lieferug
11 May 2022 20:06
Perfektes Produkt! Gute Qualität! Preis OK!
Perfektes Produkt! Gute Qualität! Preis OK!
9 April 2022 09:28
Alles gut. Es gibt nichts zu kritisieren.
Alles gut. Es gibt nichts zu kritisieren. Lieferung wie immer sehr schnell.
20 November 2021 00:00
Sehr gut
Das Präzisions-Schnellspannfutter habe ich erworben um mit einen Zentrierbohrer präziese Bohrungen mit Gewinde in dünne Wellen an der Drehbank zu fertigen. Das klappt mit diesen Bohrfutter ganz hervorragend und es macht Spass damit zu arbeiten. Wolfgang S.
5 March 2021 00:00
Schnellspann-Bohrfutter
Prima Qualität, schnelle Lieferung, gerne wieder.
3 March 2021 00:00
Bohrfutter
Super zufrieden!