Cut-off steel holder, shank height 10 mm, with HSS blade (8 % cobalt)

In order to be able to carry out grooving and parting-off work, the parting-off steel holder is clamped in a steel holder. There are three clamping screws on the top of the holder, which can be tightened or loosened using the Allen key. This allows you to quickly and securely fasten the supplied HSS blade in the holder. Measuring 100 x 12 x 2.5 mm, the parting-off blade is particularly suitable for parting off and grooving during your turning work.

The blade can be sharpened or ground depending on the intended use. For example, the grooving width can be reduced or the measuring angle changed. This enables universal material processing.

The narrower the cutting edge, the finer the work that can be carried out. Please note that reducing the blade width also increases the risk of vibrations at higher pressure.

The eight per cent cobalt alloy of the HSS blade also increases the heat and wear resistance and therefore the service life of the blade.

Please note that the blade is already pre-ground, but the chip breaker still needs to be ground in.

The parting steel holder with HSS blade has a parting width of 1.6 mm. The blade can be ground differently depending on the material of the workpiece. This enables universal material processing.

In contrast to many similar cut-off holders, this version is equipped with an eccentric clamping system. The biggest advantage of this clamping technology is the ease of use of the holder. The knife can be adjusted effortlessly with just one screw. The holder is adapted to the shape of the blade, ensuring precise and secure clamping.

The plunge-cut chisel is made from high-quality steel. The surface is hardened, ground and burnished. The burnished finish protects the surface against corrosion.

A replacement blade for the holder is also available from us.

Please note that the blade is already pre-ground. However, the chip breaker must be reground.

The matching replacement blade is also available from us.

Please note that the blade is already pre-ground, but the chip breaker still needs to be ground in.

The matching replacement blade is also available from us.

Please note that the blade is already pre-ground, but the chip breaker still needs to be ground in.

The matching replacement blade is also available from us.

Please note that the blade is already pre-ground, but the chip breaker still needs to be ground in.

The parting-off tool holder is clamped in a steel holder in order to be able to carry out parting-off and grooving work. There are three clamping screws on the top of the holder, which can be tightened or loosened using the Allen key. This allows you to quickly and securely fasten the supplied HSS blade in the holder. This parting-off tool holder is particularly suitable for small machines thanks to its low shaft height of 6 mm.

The blade can be sharpened or ground depending on the intended use. For example, the grooving width can be reduced or the measuring angle changed. This enables universal material processing.

The narrower the cutting edge, the finer the work that can be carried out. Please note that reducing the blade width also increases the risk of vibrations at higher pressure.

The eight per cent cobalt alloy of the HSS blade also increases the heat and wear resistance and therefore the service life of the blade.

Please note that the blade is already pre-ground, but the chip breaker still needs to be ground in.

The parting-off tool holder is clamped in a steel holder in order to be able to carry out parting-off and grooving work. There are three clamping screws on the top of the holder, which can be tightened or loosened using the Allen key. This allows you to quickly and securely fasten the supplied HSS blade in the holder. Measuring 120 x 15 x 3 mm, the parting-off blade is particularly suitable for parting off and grooving during your turning work.

The blade can be sharpened or ground depending on the intended use. For example, the grooving width can be reduced or the measuring angle changed. This enables universal material processing.

The narrower the cutting edge, the finer the work that can be carried out. Please note that reducing the blade width also increases the risk of vibrations at higher pressure.

The eight per cent cobalt alloy of the HSS blade also increases the heat and wear resistance and therefore the service life of the blade.

Please note that the blade is already pre-ground, but the chip breaker still needs to be ground in.

The parting-off tool holder is clamped in a steel holder in order to be able to carry out parting-off and grooving work. There are three tension screws on the top of the holder, which can be tightened or loosened using the Allen key. The 153 x 19 x 3 mm cut-off blade is particularly suitable for grooving and parting off during your turning work, as these dimensions give the blade a high degree of inherent stability, which in turn helps to increase the maximum grooving depth.

The blade can be sharpened or ground depending on the intended use. For example, the plunge width can be reduced or the blade angle changed. This enables universal material processing.

The narrower the cutting edge, the finer the work that can be carried out. Please note that reducing the blade width also increases the risk of vibrations at higher pressure.

The five per cent cobalt alloy of the HSS blade also increases the heat and wear resistance and therefore the durability of the blade.

Please note that the blade is already pre-ground. However, the chip breaker must be reground.

In order to be able to carry out grooving and parting-off work, the parting-off steel holder is clamped in a steel holder. There are three clamping screws on the top of the holder, which can be tightened or loosened using the Allen key. This allows you to quickly and securely fasten the supplied HSS blade in the holder. Measuring 110 x 13 x 2 mm, the parting-off blade is particularly suitable for parting off and grooving during your turning work.

The blade can be sharpened or ground depending on the intended use. For example, the grooving width can be reduced or the measuring angle changed. This enables universal material processing.

The narrower the cutting edge, the finer the work that can be carried out. Please note that reducing the blade width also increases the risk of vibrations at higher pressure.

The eight per cent cobalt alloy of the HSS blade also increases the heat and wear resistance and therefore the service life of the blade Please note that the blade is already pre-ground, but the chip breaker still needs to be ground in.

The parting steel holder is surface-tempered by nickel plating. The nickel coating provides excellent corrosion protection. Nickel is resistant to air, water, diluted acids, lubricants and most alkalis. Another feature of nickel surfaces is their visual enhancement.