Machine vice 50 mm jaw width
€57.00*
% €60.00* (5% saved)Prices incl. 19% VAT. plus Shipping costs
Delivery time: 1-3 working days **
More than 10 pieces available (online and in specialist shops)
Description of the
Machine vice, ground on all sides, with prism jaw, accuracy 0.005 mm
Jaw width: 50 mm
Jaw height: 25 mm
Clamping range max.: 60 mm
Total height: 50 mm
More about the brand and products from
Machine vice, ground on all sides, with prism jaw, accuracy 0.005 mm
Jaw width: 50 mm
Jaw height: 25 mm
Clamping range max.: 60 mm
Total height: 50 mm
This small vice, ground on all sides, is suitable for fine drilling and milling work. Its quick-adjustment mechanism enables rapid presetting of the four clamping ranges. The movable jaw can be clamped within these ranges using the spindle. This quick adjustment makes it particularly easy to switch between workpieces of different sizes. The handle is knurled for a good grip. A cross hole is provided at the end of the handle. A shaft with the appropriate diameter can be inserted into this cross hole, which can then be used as a lever to increase the clamping force. The vice can be attached to a machine table using the elongated holes on the side and the hammerhead screws included in the scope of delivery.
Machine vice, ground on all sides, with prism jaw, accuracy 0.005 mm
Jaw width: 63 mm
Jaw height: 31 mm
Clamping range max.: 80 mm
Total height: 63 mm
Machine vice, ground on all sides, with prism jaw, accuracy 0.005 mm
Jaw width: 80 mm
Jaw height: 40 mm
Clamping range max.: 95 mm
Total height: 84 mm
Machine vice, ground on all sides, with prism jaw, accuracy 0.005 mm
Jaw width: 100 mm
Jaw height: 45 mm
Clamping range max.: 119 mm
Total height: 95 mm
This vice is ground on all sides and is suitable for drilling and milling work. Its quick-adjustment mechanism enables rapid presetting of the eight clamping ranges. The movable jaw can be clamped within these ranges using the spindle. This quick adjustment makes it particularly easy to change between workpieces of different sizes. The handle is knurled for a good grip. A cross hole is provided at the end of the handle. A shaft with an appropriate diameter can be inserted into this cross hole, which can then be used as a lever to increase the clamping force. The vice can be attached to a machine table using the elongated holes on the side.
€57.00*
Content: 1 pcs
€59.90*
Content: 1 pcs
€75.00*
Content: 1 pcs
€113.00*
Content: 1 pcs
€178.00*
Content: 1 pcs
€127.00*
Content: 1 pcs
7 February 2023 16:25
Sehr guter Schraubstock. Preis-Leistung in Ordnung.
Sehr guter Schraubstock. Preis-Leistung in Ordnung.
1 September 2021 00:00
Maschinenschraubstock 50 mm
Super Schraubstock sehr empfehlenswert
27 March 2020 00:00
Maschinenschraubstock
Der Schraubstock entspricht meinen Erwartungen. Das Preis-Leistungsverhältnis ist gut.
20 October 2019 00:00
Echt klasse
Für den Preis bekomme ich sonst keinen so exakt gefertigten Schraubstock. Hat gute Fixierungskräfte. Das macht richtig Spaß.
8 October 2019 00:00
Sehr präzise und wertig
Sehr gute und gleichmäßige Fixierung der Werkstücke. Guter Fixierungsdruck. Leichte Bedienung. So wünscht sich das der Handwerker.
4 January 2018 00:00
leichtes hakeln an 2 Stellen sonst super. kann man leicht beheben.
28 December 2017 00:00
alles ok-top Ware
17 January 2017 00:00
1a Schraubstock
Ich nutze diesen Schraubstock auf meiner Portalfräsmaschine. Durch seine kompakte niedrige Bauweise ist er bestens geeignet. Die Spannkraft ist auch für Aluminium mehr als ausreichend. Seine Verarbeitung würde ich als sehr gut bewerten.
3 June 2014 00:00
bueno
buena
19 March 2014 00:00
sehr gut, sehr genau
Auf jeden Fall empfehlenswert. Läuft spielfrei und ohne zu haken.