paulimot Steel holder with prism suitable for "System Multifix", size A
€46.00*
Prices incl. 19% VAT. plus Shipping costs
Delivery time: 1-3 working days **
More than 10 pieces available (online and in specialist shops)
Intended use
A quick-change steel holder set is a precise and efficient clamping system for lathes to enable the quick change of turning tools, boring bars or other tools. The steel holder with the clamped tool is correctly aligned to the centre of the machine spindle just once. This positioning is fixed using a lock nut and is therefore set to the correct height each time the steel holder is reinserted into the base body. The base body of the system is firmly mounted on the top slide of the lathe and forms the basis of the system. The steel holder is the interchangeable component in which the turning tools are clamped. The system's fine-toothed ratchet system enables repeatable alignment of the tool without the need for readjustment.
Technical data
| Hardness of steel holder [HRC]: | 40 |
|---|---|
| Length [mm]: | 90 |
| Suitable for dimension "s" [mm]: | 17 - 44 |
| Suitable for top slide width [mm]: | 75 - 95 |
| Surface: | ground |
| System size: | A |
| Tool material Steel holder: | C45E steel |
| Turning steel holder [mm]: | 10 - 20 |
Steel holder suitable for "System Multifix", size A
For clamping turning tools with a round shank
Suitable for turning steel heights from 10 to 20 mm
Description of the
This steel holder is suitable for the "System Multifix" size A. The milled prism in the support surface for turning tools makes it suitable for clamping tools with a round shank. Tools with a shank diameter of up to 20 mm can be clamped.
Scope of delivery
- 1 x steel holder AH 2090
More about the brand and products from
This steel holder is suitable for the "System Multifix" size A. The milled prism in the support surface for turning tools makes it suitable for clamping tools with a round shank. Tools with a shank diameter of up to 20 mm can be clamped.
This steel holder is suitable for the "System Multifix" size Aa. The milled prism in the support surface for turning tools makes it suitable for clamping tools with a round shank. Tools with a shank diameter of up to 12 mm can be clamped.
This steel holder is suitable for the "System Multifix" size Ab. The milled prism in the support surface for turning tools makes it suitable for clamping tools with a round shank. Tools with a shank diameter of up to 16 mm can be clamped.
This steel holder is suitable for the "System Multifix" size E. The milled prism in the contact surface for turning tools makes it suitable for clamping tools with a round shank. Tools with a shank diameter of up to 30 mm can be clamped.
This steel holder is suitable for the "System Multifix" size B. The milled prism in the support surface for turning tools makes it suitable for clamping tools with a round shank. Tools with a shank diameter of up to 32 mm can be clamped.
Tip:
Are you unsure which quick-change steel holder size is right for you?
Then our guide is just right for you! In it, we show you how you can easily determine the right size.
Our guide to quick-change steel holder sizes: Determining the right quick-change steel holder size - our tips.
Alternatively, you can also use our quick-change steel holder advisor: Quick-release steel holder advisor
This steel holder is suitable for the "System Multifix" size C. The milled prism in the support surface for turning tools makes it suitable for clamping tools with a round shank. Tools with a shank diameter of up to 40 mm can be clamped.
€46.00*
Content: 1 pcs
€25.00*
Content: 1 pcs
€44.00*
Content: 1 Piece
€68.00*
Content: 1 Piece
€78.00*
Content: 1 pcs
€105.00*
Content: 1 Piece
25 March 2025 15:17
1 A++
1 A++
20 March 2025 06:34
Perfekt,schnelle Lieferung,gute Qualität
Perfekt,schnelle Lieferung,gute Qualität
18 March 2025 11:14
Todo correcto. Excelente
Todo correcto. Excelente
12 September 2024 10:25
Sehr zu empfehlen
Super
20 August 2024 04:37
Stahlhalter
Qualität und Verarbeitung top. Und wie gewohnt schnelle Lieferung.
1 July 2024 06:52
ein Erweiterungs Muß zum Set ,für Rundschafft
ein Erweiterungs Muß zum Set ,für Rundschafft Drehwerkzeuge unerlässlich.
23 April 2024 18:09
Produkt und Service lobenswert
Die Stahlhalter passten einwandfrei auf die Drehbank Grundhalterung. Keinerlei Nachbesserungen erforderlich. Hatte allerdings zuerst einen Stahlhalter mit Prisma bestellt (mein Fehler) anstatt für Vierkant Drehstahlhalter. Rücksendung und Neubestellung war ohne Probleme und sehr zügig. Diese Firma ist empfehlenswert auch in der Abwicklung
20 September 2023 17:57
Alles super
Alles super
20 September 2023 16:28
Eine gute Entscheidung der Multifix Größe A
Sehr gute Qualität. Schnelle Lieferung. Wurde auch schon getestet.
21 February 2023 08:34
Alles Top, bin sehr zufrieden!
Alles Top, bin sehr zufrieden!
Similar articles
