Drilling / boring head set 38 mm MK2 / MK3 / 12 mm (cyl.)
€126.00*
Prices incl. 19% VAT. plus Shipping costs
Delivery time: 1-3 working days **
More than 10 pieces available (online and in specialist shops)
Intended use
Boring, facing or boring heads are designed for use on milling machines. Boring heads enable right-angled facing of the end faces of bores or the boring of very precise, round bores. This means that extremely precise bores with fitting dimensions can be produced on conventional milling machines. This is a great advantage when producing bearing seats, for example.
Technical data
| Boring size [mm]: | approx. 9 - 58 |
|---|---|
| Feed accuracy [mm]: | 0,015 |
| Material of boring head: | Steel |
| Recording cone: | Cylindrical Ø 12 mm, MK2 / M10, MK3 / M12 |
| Ø clamping shank [mm]: | 8 |
| Ø drill head [mm]: | 38 |
MK2 and MK3 holder
Cylindrical holder Ø 12 mm
Incl. five carbide-tipped boring bits, length 57 to 70 mm
Boring head hardened and ground
Supplied in a clearly organised storage box
Description of the
This drilling / boring head set consists of a manual drilling head with a diameter of 38 mm, three screwable shanks, five boring tools with a clamping shank diameter of 8 mm and an angle adapter. With the angle adapter, the drilling / boring head can also be used as an impact milling cutter for surface face milling.
Thanks to the screw-on shanks, the boring head can be used on conventional milling machines with MK2, MK3 or cylindrical tool holders. The drilling carriage is adjusted manually via the adjusting spindle, the feed accuracy is 0.015 mm.
Scope of delivery
- 1 x drilling / boring head Ø 38 mm
- 1 x mounting cone MK2
- 1 x mounting cone MK3
- 1 x cylindrical holder, Ø 12 mm
- 1 x angle adapter
- 1 x boring bit, length 64 mm
- 1 x boring tool, length 71 mm
- 1 x boring chisel, length 86 mm
- 1 x boring chisel, length 91 mm
- 1 x unscrewing chisel, length 96 mm
More about the brand and products from
This drilling / boring head set consists of a manual drilling head with a diameter of 38 mm, three screwable shanks, five boring tools with a clamping shank diameter of 8 mm and an angle adapter. With the angle adapter, the drilling / boring head can also be used as an impact milling cutter for surface face milling.
Thanks to the screw-on shanks, the boring head can be used on conventional milling machines with MK2, MK3 or cylindrical tool holders. The drilling carriage is adjusted manually via the adjusting spindle, the feed accuracy is 0.015 mm.
This boring / boring head set consists of a manual boring head with a diameter of 75 mm and nine boring bits with brazed-on carbide inserts. The boring head can be used on conventional milling machines with MK3 tool holders. The drilling carriage is adjusted manually via the adjusting spindle, the feed accuracy is 0.01 mm.
This boring bar set consists of five carbide-tipped boring bars for vertical use in a boring or boring head.
The rake and flank faces of the carbide inserts in this set are already pre-ground. To achieve optimum results, the chip grooves still need to be ground in. As soon as the cutting edges of a boring bar are worn, they can be reground. A diamond grinding disc, for example, is suitable for this.
This boring bar set consists of five carbide-tipped boring bars for vertical use in a boring or boring head.
The rake and flank faces of the carbide inserts in this set are already pre-ground. To achieve optimum results, the chip grooves still need to be ground in. As soon as the cutting edges of a boring bar are worn, they can be reground. A diamond grinding disc, for example, is suitable for this.
This boring bar set consists of five carbide-tipped boring bars for vertical use in a boring or boring head.
The rake and flank faces of the carbide inserts in this set are already pre-ground. To achieve optimum results, the chip grooves still need to be ground in. As soon as the cutting edges of a boring bar are worn, they can be reground. A diamond grinding disc, for example, is suitable for this.
This boring bar set consists of five carbide-tipped boring bars for vertical use in a boring or boring head.
The rake and flank faces of the carbide inserts in this set are already pre-ground. To achieve optimum results, the chip grooves still need to be ground in. As soon as the cutting edges of a boring bar are worn, they can be reground. A diamond grinding disc, for example, is suitable for this.
This boring bar set consists of five carbide-tipped boring bars for vertical use in a boring or boring head.
The rake and flank faces of the carbide inserts in this set are already pre-ground. To achieve optimum results, the chip grooves still need to be ground in. As soon as the cutting edges of a boring bar are worn, they can be reground. A diamond grinding disc, for example, is suitable for this.
This boring bar set with inserts contains six boring bars/boring bits for vertical use in a boring head and one boring bit for horizontal use. The boring bars for vertical use have lengths of 70 to 121 mm, the boring depth ranges from 30 mm for the smallest boring tool to 90 mm for the largest boring tool. The overall length of the boring tool for use on the side mount of the drill head is 70 mm. All chisels in this set are already fitted with one carbide insert each. The boring tools can be stored safely and properly in the aluminium box included in the scope of delivery.
This boring bar set with inserts contains six boring bars/boring bits for vertical use in a boring head and one boring bit for horizontal use. The boring bars for vertical use have lengths of 88 to 130 mm, the boring depth ranges from 38 mm for the smallest boring tool to 90 mm for the largest boring tool. The total length of the boring tool for use on the side mount of the drill head is 108 mm. All chisels in this set are already fitted with one carbide insert each. The boring tools can be stored safely and properly in the aluminium box included in the scope of delivery.
This drilling / boring head set consists of a manual drilling head with a diameter of 50 mm and nine boring bits with brazed-on carbide inserts. The boring head can be used on conventional milling machines with MK2 tool holders. The drilling carriage is adjusted manually via the adjusting spindle, the feed accuracy is 0.01 mm.
This drilling / boring head set consists of a manual drilling head with a diameter of 50 mm and nine boring bits with brazed-on carbide inserts. The boring head can be used on conventional milling machines with MK3 tool holders. The drilling carriage is adjusted manually via the adjusting spindle, the feed accuracy is 0.01 mm.
This drilling/boring head set consists of a manual drilling head with a diameter of 50 mm and nine boring bits with brazed-on carbide inserts. The boring head can be used on conventional milling machines with SK30 tool holders. The drilling carriage is adjusted manually via the adjusting spindle, the feed accuracy is 0.01 mm.
This drilling / boring head set consists of a manual drilling head with a diameter of 75 mm and nine boring bits with brazed-on carbide inserts. The boring head can be used on conventional milling machines with MK2 tool holders. The drilling carriage is adjusted manually via the adjusting spindle, the feed accuracy is 0.01 mm.
This boring/boring head set consists of a manual boring head with a diameter of 75 mm and nine boring bits with brazed-on carbide inserts. The boring head can be used on conventional milling machines with SK30 tool holders. The drilling carriage is adjusted manually via the adjusting spindle, the feed accuracy is 0.01 mm.
€126.00*
Content: 1 Piece
€159.00*
Content: 1 pcs
€19.00*
Content: 1 pcs
€31.00*
Content: 1 pcs
€37.00*
Content: 1 pcs
€14.90*
Content: 1 pcs
€18.50*
Content: 1 pcs
€104.00*
Content: 1 Piece
€144.00*
Content: 1 Piece
€118.00*
Content: 1 pcs
€121.00*
Content: 1 pcs
€129.00*
Content: 1 pcs
€139.00*
Content: 1 pcs
€165.00*
Content: 1 pcs
12 December 2022 21:00
Ausdrehkopf
Wahre wie immer von guter Qualität und schnelle Lieferung
22 October 2022 03:14
Passt
Passt
6 April 2022 11:40
Super Werkzeug für meine Zwecke
Werkzeug ist erstaunlich genau, verwende es um Vespas instand zu setzten. Lagersitze usw. Es lässt sich super damit arbeiten. Werde weiterhin bei Euch einkaufen.
19 May 2020 00:00
Vielseitig einsetzbar
Der Ausdrehkopf ist sehr gut für kleinere Arbeiten in NE-Metalle und Kunststoffe geeignet. Arbeiten in Stahl habe ich noch nicht getestet. Für meine Ansicht ein gutes Preis/Leistungsverhältnis und vor allem immer eine sehr schnelle Lieferung mit Paulimot!
19 April 2020 00:00
hat gut funktioniert !
Habe 2 Bohrungen ausgespindelt bin mit dem Ergebnis sehr zufrieden.
23 April 2019 00:00
Die Lösung für die Bohrmaschine
Suchte nach der Möglichkeit, einen Gegenstand zu bohren, den ich in die Fräse nicht einspannen konnte: Hiermit ging es. Natürlich passt der Kopf auch in die Fräse. Die Bohrstähle sind ok.