Skip to main content

SIEG machine vice swivelling, quick-release clamp 80 mm jaw width

Intended use

A vice is used to clamp workpieces properly so that drilling and milling work can be carried out safely on machine tools (e.g. drilling machines or drilling/milling machines).

Technical data

Jaw height [mm]: 31
Jaw width [mm]: 80
Net weight [kg]: 5,9
Rotatable [°]: 360 (angle scale up to 180)
Span (max.) [mm]: 100
Total height [mm]: 92
Ă˜ base area [mm]: 134
Material: Steel

80 mm jaw width, 100 mm maximum clamping width

With quick-release lever for quick clamping and unclamping

Can be rotated 360° on the base plate

Fixed jaw with vertical and horizontal prisms for clamping cylindrical workpieces

Milled shoulder in clamping jaws for flat workpieces

Description of the

This 360° rotating machine vice is particularly characterised by its quick-release mechanism. Vices with this technology are particularly suitable for series processing of workpieces of the same dimensions. The clamping range is preset via the spindle. The workpiece itself is clamped using the quick-clamping lever. Actuating the lever opens or closes the jaws by approx. 3 mm, enabling the workpieces to be changed quickly. The machining angle of +/- 90° can be set and read off using the angle scale on the turntable. The desired angle position is fixed using two nuts. The vice can be attached to a machine table using the slotted holes on the side.

Scope of delivery

  • 1 x SIEG machine vice, swivelling, quick-release clamp 80 mm jaw width

More about the brand and products from 

Product comparison
Article image
Red, rotating machine vice with quick-release clamp and 80 mm jaw width. The jaws are open and the hand crank is visible.
Red, rotating machine vice with quick-release clamp. The jaw width is 55 mm. The vice has a lever and a crank.
Red, swivelling machine vice with 70mm jaw width. The jaws are open. An angle scale is visible.
Red machine vice with 100 mm jaw width, swivelling. You can see an angle scale from 0 to 90 degrees and the clamping jaws.
Product title
SIEG machine vice swivelling, quick-release clamp 80 mm jaw width
SIEG machine vice, swivelling, quick-release clamp 55 mm jaw width
SIEG Machine vice swivelling 70 mm jaw width
SIEG machine vice swivelling 100 mm jaw width
Valuation

Average rating of 5 out of 5 stars

Description of the

This 360° rotating machine vice is particularly characterised by its quick-release mechanism. Vices with this technology are particularly suitable for series processing of workpieces of the same dimensions. The clamping range is preset via the spindle. The workpiece itself is clamped using the quick-clamping lever. Actuating the lever opens or closes the jaws by approx. 3 mm, enabling the workpieces to be changed quickly. The machining angle of +/- 90° can be set and read off using the angle scale on the turntable. The desired angle position is fixed using two nuts. The vice can be attached to a machine table using the slotted holes on the side.

This 360° rotating machine vice is particularly characterised by its quick-release mechanism. Vices with this technology are particularly suitable for series processing of workpieces of the same dimensions. The clamping range is preset via the spindle. The workpiece itself is clamped using the quick-clamping lever. Actuating the lever opens or closes the jaws by approx. 2 mm, enabling the workpieces to be changed quickly. The machining angle of +/- 90° can be set and read off using the angle scale on the turntable. The desired angle position is fixed using two nuts. The vice can be attached to a machine table using the slotted holes on the side.

The swivelling function of this machine vice makes it possible to process surfaces at a specific angle in relation to the clamping surface. The machining angle can be set and read off from 0 to 90° using the angle scale on the side. The desired angle position is fixed using a tommy screw. The vice has an adjustable stop screw for the zero position. The vice can be attached to a machine table using the four slotted holes.

The swivelling function of this machine vice makes it possible to process surfaces at a specific angle in relation to the clamping surface. The machining angle can be set and read off from 0 to 90° using the angle scale on the side. The desired angle position is fixed using a tommy screw. The vice has an adjustable stop screw for the zero position. The vice can be attached to a machine table using the four slotted holes.

Price

€222.00*

Content: 1 pcs

€178.00*

Content: 1 pcs

€117.00*

Content: 1 pcs

€147.00*

Content: 1 pcs

Jaw height [mm]
31
20
20
26
Jaw width [mm]
80
55
70
100
Net weight [kg]
5,9
2,76
2,6
4,7
Rotatable [°]
360 (angle scale up to 180)
360 (angle scale up to 180)
-
-
Span (max.) [mm]
100
72
60
92
Total height [mm]
92
69
60
78
Ă˜ base area [mm]
134
111
-
-
Material
Steel
Steel
Steel
Steel
Base area [mm]
-
-
140 x 100
185 x 135
Swivelling [°]
-
-
90
90

0 of 0 reviews

Average rating of 0 out of 5 stars

Leave a review!

Share your experiences with other customers.

Excellent

Very good

Good

Acceptable

Unsatisfactory

This site is protected by reCAPTCHA and the Privacy Policy and Terms of Use apply.

Information on the manufacturer (information obligations under the GPSR Product Safety Regulation)
Paulitschek Maschinen- und Warenvertriebsgesellschaft mbH
ZeppelinstraĂŸe 3
89231 Neu-Ulm, Deutschland
+49 731 23232
support@paulimot.de