HSS hand reamer 5.5 mm fit H7
€6.50*
Prices incl. 19% VAT. plus Shipping costs
Delivery time: 1-3 working days **
More than 10 pieces available (online and in specialist shops)
Intended use
A reamer is used for the fine machining of bores. The bores, which should usually be drilled 0.1 to 0.2 mm below the nominal dimension, can be reamed to the final dimension using a reamer. In the vast majority of cases, reamers are used to ream holes for dowel pins. By machining the bore, a high degree of shape and dimensional accuracy as well as a high surface quality of the finished reamed bore are achieved.
Technical data
| Cutting length [mm]: | approx. 47 |
|---|---|
| Execution: | right-hand cutting |
| Tolerance class: | H7 |
| Total length [mm]: | 93 |
| Ø reamers [mm]: | 5,5 |
| Material: | HSS |
Tolerance class H7
Made of HSS steel
Right-hand cutting
Cylindrical shank with square
Description of the
This HSS hand reamer is subject to tolerance class H7. At the end of the cylindrical shaft there is a square for mounting in a tap wrench.
Scope of delivery
- 1 x hand reamer Ø 5.5 mm
More about the brand and products from
This HSS hand reamer is subject to tolerance class H7. At the end of the cylindrical shaft there is a square for mounting in a tap wrench.
This HSS hand reamer is subject to tolerance class H7. At the end of the cylindrical shaft there is a square for mounting in a tap wrench.
This HSS hand reamer is subject to tolerance class H7. At the end of the cylindrical shaft there is a square for mounting in a tap wrench.
Cylindrical shank with square, right-hand cutting
This HSS hand reamer is subject to tolerance class H7. At the end of the cylindrical shaft there is a square for mounting in a tap wrench.
This HSS hand reamer is subject to tolerance class H7. At the end of the cylindrical shaft there is a square for mounting in a tap wrench.
This HSS hand reamer is subject to tolerance class H7. At the end of the cylindrical shaft there is a square for mounting in a tap wrench.
This HSS hand reamer is subject to tolerance class H7. At the end of the cylindrical shaft there is a square for mounting in a tap wrench.
This HSS hand reamer is subject to tolerance class H7. At the end of the cylindrical shaft there is a square for mounting in a tap wrench.
This HSS hand reamer is subject to tolerance class H7. At the end of the cylindrical shaft there is a square for mounting in a tap wrench.
This HSS hand reamer is subject to tolerance class H7. At the end of the cylindrical shaft there is a square for mounting in a tap wrench.
This HSS hand reamer is subject to tolerance class H7. At the end of the cylindrical shaft there is a square for mounting in a tap wrench.
This HSS hand reamer is subject to tolerance class H7. At the end of the cylindrical shaft there is a square for mounting in a tap wrench.
This HSS hand reamer is subject to tolerance class H7. At the end of the cylindrical shaft there is a square for mounting in a tap wrench.
This HSS hand reamer is subject to tolerance class H7. At the end of the cylindrical shaft there is a square for mounting in a tap wrench.
This HSS hand reamer is subject to tolerance class H7. At the end of the cylindrical shaft there is a square for mounting in a tap wrench.
This HSS hand reamer is subject to tolerance class H7. At the end of the cylindrical shaft there is a square for mounting in a tap wrench.
This HSS hand reamer is subject to tolerance class H7. At the end of the cylindrical shaft there is a square for mounting in a tap wrench.
This HSS hand reamer is subject to tolerance class H7. At the end of the cylindrical shaft there is a square for mounting in a tap wrench.
This HSS hand reamer is subject to tolerance class H7. At the end of the cylindrical shaft there is a square for mounting in a tap wrench.
This HSS hand reamer is subject to tolerance class H7. At the end of the cylindrical shaft there is a square for mounting in a tap wrench.
This HSS hand reamer is subject to tolerance class H7. At the end of the cylindrical shaft there is a square for mounting in a tap wrench.
This HSS hand reamer is subject to tolerance class H7. At the end of the cylindrical shaft there is a square for mounting in a tap wrench.
€6.50*
Content: 1 pcs
€3.50*
Content: 1 pcs
€3.50*
Content: 1 pcs
€3.50*
Content: 1 pcs
€4.50*
Content: 1 pcs
€4.50*
Content: 1 pcs
€5.50*
Content: 1 pcs
€6.50*
Content: 1 pcs
€6.50*
Content: 1 pcs
€7.00*
Content: 1 pcs
€7.50*
Content: 1 pcs
€9.50*
Content: 1 pcs
€10.00*
Content: 1 pcs
€10.00*
Content: 1 pcs
€10.00*
Content: 1 pcs
€11.00*
Content: 1 pcs
€11.00*
Content: 1 pcs
€11.50*
Content: 1 pcs
€12.50*
Content: 1 pcs
€13.00*
Content: 1 pcs
€17.00*
Content: 1 pcs
€19.00*
Content: 1 pcs
€22.50*
Content: 1 pcs
17 February 2025 17:40
Super zufrieden!
Bin sehr zufrieden. Artikelqualität ist super, der Bestellvorgang schnell und problemlos, die Verpackung und Lieferung ebenfalls super, der Preis ist günstig, alles zusammen ein sehr gut. Danke
19 December 2024 09:01
Schnelle Bearbeitung und Lieferung. Danke!
Schnelle Bearbeitung und Lieferung. Danke!
13 January 2021 00:00
World Champion Tools / www.martinsmolinski.de
World Champion Tools / www.martinsmolinski.de
14 July 2020 00:00
Super
super, immer wieder.schnelle Lieferung.
4 May 2020 00:00
Sehr zufrieden
Alles optimal gelaufen!
25 July 2019 00:00
Reibahle
perfektes Preisleistungsverhältnis und schnelle Lieferung
27 March 2019 00:00
Schnell und gut! Danke!
Schnell und gut! Danke!
15 March 2016 00:00
Reibahle ist scharf, geölt und in einem Behältnis angekommen - alles super
Kann mich nicht beschweren, ist ne gute Qualität und soweit ich das beurteilen kann gibt es nichts auszusetzen. Der Preis war auch gut, also bin ich voll zufrieden und bestelle hier gerne wieder mal.
25 June 2013 00:00
ales in ordnung. gerne wieder.
4 October 2012 00:00
sehr gut
Reibahle ist qualitativ iO. Sie macht das was sie machen soll. Proma.