Locating taper for drilling / boring head, MK1 / M6
€6.50*
Prices incl. 19% VAT. plus Shipping costs
Delivery time: 1-3 working days **
More than 10 pieces available (online and in specialist shops)
Intended use
Tools can be inserted and clamped in the tool holder of milling machines, drilling machines or lathes using a mounting taper. As a rule, these holders are standardised.
Technical data
| Mounting shaft: | MK1 / M6 |
|---|---|
| Mounting thread: | M14 x 1.0 |
| Total length [mm]: | 80 |
| Weight [g]: | 70 |
Screw-in taper MK1
Thread M14 x 1.0
Hardened and ground
Description of the
This screw-in taper made of steel is hardened and ground. Its M14 x 1.0 thread allows it to be screwed into drilling / boring heads with a corresponding mounting thread. The locating cone is designed as a Morse taper 1 with an M6 tightening thread.
Scope of delivery
- 1 x taper for drilling / boring head, MK1 / M6
More about the brand and products from
This screw-in taper made of steel is hardened and ground. Its M14 x 1.0 thread allows it to be screwed into drilling / boring heads with a corresponding mounting thread. The locating cone is designed as a Morse taper 1 with an M6 tightening thread.
This screw-in clamping shank made of steel is hardened and ground. Its M14 x 1.0 thread allows it to be screwed into drilling / boring heads with a corresponding mounting thread. The clamping shank is cylindrical and has a diameter of 12 mm.
This screw-in taper made of steel is hardened and ground. Its M14 x 1.0 thread allows it to be screwed into drilling / boring heads with a corresponding mounting thread. The locating cone is designed as a Morse taper 2 with an M10 tightening thread.
This screw-in taper made of steel is hardened and ground. Its M14 x 1.0 thread allows it to be screwed into drilling / boring heads with a corresponding mounting thread. The locating cone is designed as a Morse taper 3 with an M12 tightening thread.
€6.50*
Content: 1 pcs
€6.00*
Content: 1 pcs
€7.00*
Content: 1 pcs
€9.00*
Content: 1 pcs