Quick-action drill chuck 1-13 mm + taper arbor MK2 / M10 / B16
€24.00*
Prices incl. 19% VAT. plus Shipping costs
Delivery time: 1-3 working days **
More than 10 pieces available (online and in specialist shops)
Intended use
Drill chucks are used to clamp tools with a cylindrical shank, such as drills, countersinks, reamers, etc. Drill chucks are used in machine tools such as lathes, milling machines or drilling machines. Depending on the type of machine, a drill chuck with a suitable holder is required. A general distinction is made between drill chucks in which the tools are clamped with a spanner and drill chucks in which the tools can be clamped without a spanner, so-called quick-action drill chucks.
Technical data
| Clamping range [mm]: | 1 - 13 |
|---|---|
| Concentricity deviation max. [mm]: | 0,1 |
| Cone mandrel: | MK2 / M10 / B16 |
| Inner cone: | B16 |
| Ø drill max. [mm]: | 13 |
Fast, secure clamping and unclamping
No clamping spanner required
With tightening thread, suitable for use on milling machines
For clamping tools with a cylindrical shank
Taper arbor and drill chuck connected via cone
Description of the
This quick-action drill chuck is supplied including taper arbour. The taper arbor and drill chuck are connected to each other via a form-fit B16 cone, i.e. the taper arbor can be separated from the drill chuck. The taper arbor has a tightening thread in the Morse taper and is therefore suitable for use in milling machines. The clamping range of this chuck is 1 to 13 mm. As the three clamping jaws close completely, it is also possible to clamp tools with a shank diameter of less than 1 mm.
Note: Drill chucks are not suitable for milling work.
Scope of delivery
- 1 x quick-action drill chuck 1-13 mm with tapered arbour MK2 / M10 / B16
More about the brand and products from
This quick-action drill chuck is supplied including taper arbour. The taper arbor and drill chuck are connected to each other via a form-fit B16 cone, i.e. the taper arbor can be separated from the drill chuck. The taper arbor has a tightening thread in the Morse taper and is therefore suitable for use in milling machines. The clamping range of this chuck is 1 to 13 mm. As the three clamping jaws close completely, it is also possible to clamp tools with a shank diameter of less than 1 mm.
Note: Drill chucks are not suitable for milling work.
With this precision quick-action drill chuck, the taper arbor and the drill bit holder consist of one part, i.e. the taper arbor cannot be separated from the drill chuck. In contrast to drill chucks with an inserted taper arbor, this design enables a higher concentricity to be achieved. The taper arbor has a tightening thread in the Morse taper and is therefore suitable for use in milling machines. The clamping range of this chuck is 1 to 13 mm. As the three clamping jaws close completely, it is also possible to clamp tools with a shank diameter of less than 1 mm.
Note: Drill chucks are not suitable for milling work.
With this precision quick-action drill chuck, the taper arbor and the drill bit holder consist of one part, i.e. the taper arbor cannot be separated from the drill chuck. In contrast to drill chucks with an inserted taper arbor, this design enables a higher concentricity to be achieved. The taper arbor has a tightening thread in the Morse taper and is therefore suitable for use on milling machines. The clamping range of this chuck is 1 to 16 mm. As the three clamping jaws close completely, it is also possible to clamp tools with a shank diameter of less than 1 mm.
Note: Drill chucks are not suitable for milling work.
This quick-action drill chuck is supplied including taper arbour. The taper arbor and drill chuck are connected to each other via a form-fit B18 cone, i.e. the taper arbor can be separated from the drill chuck. The taper arbor has a tightening thread in the Morse taper and is therefore suitable for use in milling machines. The clamping range of this chuck is 1 to 16 mm. As the three clamping jaws close completely, it is also possible to clamp tools with a shank diameter of less than 1 mm.
Note: Drill chucks are not suitable for milling work.
This quick-release drill chuck has a locking mechanism that prevents the drill chuck from loosening during anti-clockwise rotation. As a result, unlike conventional quick-action drill chucks, this drill chuck is suitable for clockwise and anti-clockwise rotation. The chuck is locked and unlocked by turning the red ring to "LOCK" or "UNLOCK". The drill chuck is supplied with a tapered arbour. The taper arbor and drill chuck are connected to each other via a form-fit B16 cone, i.e. the taper arbor can be separated from the drill chuck. The taper arbor has a tightening thread in the Morse taper and is therefore suitable for use in milling machines. The clamping range of this chuck is 1 to 13 mm. As the three clamping jaws close completely, it is also possible to clamp tools with a shank diameter of less than 1 mm.
Note: Drill chucks are not suitable for milling work.
This quick-release drill chuck has a locking mechanism that prevents the drill chuck from loosening during anti-clockwise rotation. As a result, unlike conventional quick-release drill chucks, this drill chuck is suitable for clockwise and anti-clockwise rotation. The chuck is locked and unlocked by turning the red ring to "LOCK" or "UNLOCK". The drill chuck is supplied with a tapered arbour. The taper arbor and drill chuck are connected to each other via a form-fit B18 cone, i.e. the taper arbor can be separated from the drill chuck. The taper arbor has a tightening thread in the Morse taper and is therefore suitable for use in milling machines. The clamping range of this chuck is 1 to 16 mm. As the three clamping jaws close completely, it is also possible to clamp tools with a shank diameter of less than 1 mm.
Note: Drill chucks are not suitable for milling work.
€24.00*
Content: 1 pcs
€51.50*
Content: 1 pcs
€55.50*
Content: 1 Piece
€26.50*
Content: 1 pcs
€29.00*
Content: 1 pcs
€33.50*
Content: 1 pcs
13 January 2025 13:59
Looks good ... just what I ordered
Looks good ... just what I ordered
7 March 2024 16:36
Très bonne qualité de fabrication !
Très bonne qualité de fabrication !
17 February 2023 11:53
Alles bestens , danke schön
Alles bestens , danke schön
14 February 2023 11:53
Gutes Bohrfutter, gutes Preis-Leistungs-Verhältnis
Lieferung schnell und unkompliziert wie immer! Danke! Das Bohrfutter funktioniert (bisher) einwandfrei. Auch größere Bohrer werden sehr gut gehalten, der Rundlauf ist nicht zu beanstanden, die Bedienung leichtgängig ohne zu klappern. Das ist ein sehr gutes Preis-Leistungs-Verhältnis. Den festen Sitz des B-Kegels des MK-Dornes im Futter empfehle ich vor der Erstbenutzung zu prüfen. Bei meinem Futter war der Kegel zwar eingesteckt, ließ sich aber mit bloßer Handkraft herausziehen.
14 February 2023 10:04
Hat meine Tischbohrmaschine sehr aufgewertet
Ich habe mit diesem Bohrfutter das originale Futter meiner Einhell Tischbohrmaschine ersetzt, weil das ziemlich viel Spiel hatte. Das Paulimot-Futter passt exakt und läuft perfekt rund. Jetzt macht das Bohren gleich viel mehr Spaß, da die Ergebnisse wesentlich genauer sind. Danke auch an Paulimot für den schnellen Versand!
3 January 2023 15:55
perfekt!!!
perfekt!!!
6 December 2022 17:42
Entspricht Voll den Erwartungen
Entspricht Voll den Erwartungen
16 November 2022 08:44
Perfekt schnell geliefert jeder Zeit wider
Perfekt schnell geliefert jeder Zeit wider
3 November 2022 12:45
Gutes Bohrfutter
Gutes Bohrfutter
2 July 2021 00:00
1-13mm Drill chuck
Good value