Clamping claw set 58-piece M8 / 10 mm in wall holder
€30.00*
Prices incl. 19% VAT. plus Shipping costs
Delivery time: 1-3 working days **
More than 10 pieces available (online and in specialist shops)
Intended use
Clamping claws are used for fast and secure clamping of workpieces, tools and fixtures on machine tables with T-slots.
Technical data
| Clamping height (max.) [mm]: | 64 |
|---|---|
| For groove width [mm]: | 10 |
| Hardness [HRC]: | 18 - 20 |
| Thread size stud bolts: | M8 |
| Tool material: | C235 Steel / cast steel |
58-piece set
For 10 mm T-slot width and M8 thread
Fast and secure clamping of workpieces, tools or fixtures
Supplied with practical wall bracket
Made from steel and cast steel
Description of the
The individual components in this set are made of C235 steel and cast steel.
Assembly (see image "Assembly example")
The clamping arm (also known as a clamping claw) with a slotted hole is attached so that one end rests on the body to be clamped. The other end rests on a support, the step block. The threaded rod is attached as close as possible to the workpiece and fixed at the lower end to a plate or the machine table using a T-slot nut. A collar nut is fitted to the upper end of the stud bolt. This applies the clamping force by tightening it firmly. This means that the workpiece can no longer slip and work on the workpiece can be carried out safely and quickly.
The clamping claw set has a maximum clamping height of 64 mm.
The individual clamping elements are neatly stored in the practical wall holder.
Scope of delivery
- 1 x wall bracket
- 6 x T-nut
- 6 x collar nut
- 4 x extension nut
- 6 x step clamps
- 12 x step block
- 24 x stud bolt
More about the brand and products from
The individual components in this set are made of C235 steel and cast steel.
Assembly (see image "Assembly example")
The clamping arm (also known as a clamping claw) with a slotted hole is attached so that one end rests on the body to be clamped. The other end rests on a support, the step block. The threaded rod is attached as close as possible to the workpiece and fixed at the lower end to a plate or the machine table using a T-slot nut. A collar nut is fitted to the upper end of the stud bolt. This applies the clamping force by tightening it firmly. This means that the workpiece can no longer slip and work on the workpiece can be carried out safely and quickly.
The clamping claw set has a maximum clamping height of 64 mm.
The individual clamping elements are neatly stored in the practical wall holder.
The individual components in this set are made of C235 steel and cast steel.
Assembly (see image "Assembly example")
The clamping arm (also known as a clamping claw) with a slotted hole is attached so that one end rests on the body to be clamped. The other end rests on a support, the step block. The threaded rod is attached as close as possible to the workpiece and fixed at the lower end to a plate or the machine table using a T-slot nut. A collar nut is fitted to the upper end of the stud bolt. This applies the clamping force by tightening it firmly. This means that the workpiece can no longer slip and work on the workpiece can be carried out safely and quickly.
The clamping claw set has a maximum clamping height of 64 mm.
The individual clamping elements are neatly stored in the practical wall holder.
This 10-piece clamping claw set with M6 thread for 8 mm T-slot width is suitable for secure and fast clamping of workpieces, tools and fixtures, especially on our dividing heads.
The set is suitable for the following dividing heads:
- Rotary indexing table Ø 80 mm horizontal / vertical (item no. 16200)
- Rotary indexing table Ø 80 mm swivelling horizontal / vertical (item no. 16201)
- Rotary table dividing head Ø 100 mm horizontal / vertical (item no. 16202)
- Rotary table dividing head Ø 100 mm swivelling horizontal / vertical (item no. 16203)
- Rotary indexing table Ø 105 mm swivelling horizontal / vertical (item no. 16205)
The clamping element with a slotted hole (also known as a clamping claw) is attached so that one end rests on the body to be clamped. The other end rests on a support, the step block. The threaded rod is attached as close as possible to the workpiece and fixed at the lower end to one of our rotary tables (item no. 16200, 16201, 16202, 16203 or 16205) using a T-slot nut. A collar nut is fitted to the upper end of the stud bolt. This applies the clamping force by tightening it firmly. Now the workpiece can no longer slip and you can carry out your work safely and quickly.
The clamping claw set can be used for workpieces with a maximum height of 20 mm.
Please note that the clamping claw set is not compatible with the VERTEX rotary tables!
This 10-piece clamping claw set with M6 thread is suitable for secure and fast clamping of workpieces, tools and fixtures.
Material properties
The individual components in this set are made from C45 heat-treated steel (material number 1.0503) and have undergone heat treatment. Among other things, this leads to an increase in tensile strength.
Manufacturer's hardness specifications for all components: 32 HRC
Assembly
The clamping element (step block) with a slotted hole is fastened so that one end rests on the body to be clamped and the other end rests on a step clamp. The stud bolt is attached as close as possible to the workpiece and fixed at the lower end to a plate or the machine table. A collar nut is fitted to the upper end of the stud bolt. This applies the clamping force by tightening it firmly so that the workpiece can no longer slip. This allows you to work safely and quickly on the workpiece.
The clamping claw set can be used for workpieces with a maximum height of 64 mm.
The individual components in this set are made from C45 heat-treated steel (material number 1.0503) and have undergone heat treatment. Among other things, this leads to an increase in tensile strength.
Assembly (see picture "Assembly example")
The clamping arm (also known as a clamping claw) with a slotted hole is fastened so that one end rests on the body to be clamped. The other end rests on a support, the step block. The threaded rod is attached as close as possible to the workpiece and mounted at the lower end on a plate or the machine table. This applies the clamping force by tightening it firmly. This prevents the workpiece from slipping. This allows you to carry out your work on the workpiece safely and quickly.
The clamping claw set has a maximum clamping height of 64 mm.
The individual clamping elements are neatly stored in the practical plastic case.
10-piece clamping claw set for 10 mm T-slot width and M8 thread.
This set is used for quick clamping of workpieces, tools or fixtures.
Material properties
The individual components in this set are made from C45 heat-treated steel (material number 1.0503) and have undergone heat treatment. Among other things, this leads to an increase in tensile strength.manufacturer's hardness specifications for all components: 32 HRC
Assembly
The clamping element (step block) with a slotted hole is fastened so that one end rests on the body to be clamped and the other end rests on a step clamp. The stud bolt is attached as close as possible to the workpiece and fixed at the lower end to a plate or the machine table. A collar nut is fitted to the upper end of the stud bolt. This applies the clamping force by tightening it firmly so that the workpiece can no longer slip. This allows you to work safely and quickly on the workpiece.
The clamping claw set can be used for workpieces with a maximum height of 64 mm.
The individual components in this set are made of C235 steel and cast steel.
Assembly (see image "Assembly example")
The clamping arm (also known as a clamping claw) with a slotted hole is attached so that one end rests on the body to be clamped. The other end rests on a support, the step block. The threaded rod is attached as close as possible to the workpiece and fixed at the lower end to a plate or the machine table using a T-slot nut. A collar nut is fitted to the upper end of the stud bolt. This applies the clamping force by tightening it firmly. This means that the workpiece can no longer slip and work on the workpiece can be carried out safely and quickly.
The clamping claw set has a maximum clamping height of 64 mm.
The individual clamping elements are neatly stored in the practical wall holder.
The individual components in this set are made from C45 heat-treated steel (material number 1.0503) and have undergone heat treatment. Among other things, this leads to an increase in tensile strength.
Assembly (see picture "Assembly example")
The clamping arm (also known as a clamping claw) with a slotted hole is fastened so that one end rests on the body to be clamped. The threaded rod is attached as close as possible to the workpiece and fastened at the lower end to a plate or the machine table using a T-nut. A collar nut is fitted to the upper end of the stud bolt. This applies the clamping force by tightening it firmly. This prevents the workpiece from slipping. This allows you to work on the workpiece safely and quickly.
The clamping claw set has a maximum clamping height of 64 mm.
The individual clamping elements are neatly stored in the practical plastic case.
10-piece clamping claw set for 12 mm T-slot width and M10 thread.
This set is used for quick clamping of workpieces, tools or fixtures.
Material properties
The individual components in this set are made from C45 heat-treated steel (material number 1.0503) and have undergone heat treatment. Among other things, this leads to an increase in tensile strength.manufacturer's hardness specifications for all components: 32 HRC
Assembly
The clamping element (step block) with a slotted hole is fastened so that one end rests on the body to be clamped and the other end rests on a step clamp. The stud bolt is attached as close as possible to the workpiece and fixed at the lower end to a plate or the machine table. A collar nut is fitted to the upper end of the stud bolt. This applies the clamping force by tightening it firmly so that the workpiece can no longer slip. This allows you to work safely and quickly on the workpiece.
The clamping claw set can be used for workpieces with a maximum height of 64 mm
The individual components in this set are made from C45 heat-treated steel (material number 1.0503) and have undergone heat treatment. Among other things, this leads to an increase in tensile strength.
Assembly (see picture "Assembly example")
The clamping arm (also known as a clamping claw) with a slotted hole is fastened so that one end rests on the body to be clamped. The other end rests on a support, the step block. The threaded rod is attached as close as possible to the workpiece and fixed at the lower end to a plate or the machine table using a T-slot nut. A collar nut is fitted to the upper end of the stud bolt. This applies the clamping force by tightening it firmly. This prevents the workpiece from slipping. This allows you to work on the workpiece safely and quickly.
The clamping claw set has a maximum clamping height of 70 mm.
The individual clamping elements are neatly stored in the practical plastic case.
The individual components in this set are made of C235 steel and cast steel.
Assembly (see picture "Assembly example")
The clamp with a slotted hole (also known as a clamping claw) is attached so that one end rests on the body to be clamped. The other end rests on a support, the step block. The threaded rod is attached as close as possible to the workpiece and fixed at the lower end to a plate or the machine table using a T-slot nut. A collar nut is fitted to the upper end of the stud bolt. This applies the clamping force by tightening it firmly. This means that the workpiece can no longer slip and work on the workpiece can be carried out safely and quickly.
The clamping claw set has a maximum clamping height of 70 mm.
The individual clamping elements are neatly stored in the practical wall holder.
10-piece clamping claw set for 14 mm T-slot width and M12 thread.
This set is used for quick clamping of workpieces, tools or fixtures.
Material properties
The individual components in this set are made from C45 heat-treated steel (material number 1.0503) and have undergone heat treatment. Among other things, this leads to an increase in tensile strength.manufacturer's hardness specifications for all components: 32 HRC
Assembly
The clamping element (step block) with a slotted hole is fastened so that one end rests on the body to be clamped and the other end rests on a step clamp. The stud bolt is attached as close as possible to the workpiece and fixed at the lower end to a plate or the machine table. A collar nut is fitted to the upper end of the stud bolt. This applies the clamping force by tightening it firmly so that the workpiece can no longer slip. This allows you to work safely and quickly on the workpiece.
The clamping claw set can be used for workpieces with a maximum height of 70 mm
€30.00*
Content: 1 pcs
€25.50*
Content: 1 pcs
€13.00*
Content: 1 Piece
€15.50*
Content: 1 pcs
€36.50*
Content: 1 pcs
€16.50*
Content: 1 pcs
€33.00*
Content: 1 pcs
€39.50*
Content: 1 pcs
€18.00*
Content: 1 pcs
€42.50*
Content: 1 pcs
€36.00*
Content: 1 pcs
€26.00*
Content: 1 pcs
2 December 2024 11:36
Top, und vielseitig
Hatte schon länger überlegt, mir einen Satz zu Kaufen. Aber die Frage war immer, wann braucht man das? Seit ich den Satz jetzt habe, schon min 5mal benutzt. Sehr vielseitig, und auch die Qualität geht voll in Ordnung. Für einen Bohrständer und privat, Anwendung. TOP SUPER. Kann ich nur weiterempfehlen 😁
16 August 2024 09:53
Wie immer ,alles gut ,sehr schnelle Lieferung
Wie immer ,alles gut ,sehr schnelle Lieferung
13 February 2024 09:48
Gut und günstig
Muss sagen sehr gute Qualität. Vor allem mit die Aufbewahrungsbox zum aufhängen. Ist es sehr praktisch. Und wurde schnell geliefert.
13 October 2023 16:42
Wie üblich bei Paulimot, präzise, vernünftige
Wie üblich bei Paulimot, präzise, vernünftige Preise und Lieferung quasi über Nacht. Ich keinen besseren Lieferanten in Deutschland und sogar in die Schweiz wird prompt und unkompliziert geliefert.
10 October 2023 16:42
Spannbratzen von Paulimot
Wunderbares Werkzeug, für die Fräser oder den Bohrständer. Auch auf Drehbank und Co.. Guter Service und schnelle Lieferung. Paulimot ist und bleibt für mich die beste Wahl. Die Nummer 1 für Heimwerker und Handwerker, Profis. Sehr guter Shop im Internet. Kann ich nur empfehlen.
8 March 2023 14:07
Dans l’ensemble bon rapport qualité-prix. La caissette de
Dans l’ensemble bon rapport qualité-prix. La caissette de rangement est un peu décevante, mais le matériel de fixation est très bien et c’est bien le plus important!
24 February 2023 17:18
Ausgezeichnetes Sortiment für die meisten Einspannmaßnahmen geeignet,
Ausgezeichnetes Sortiment für die meisten Einspannmaßnahmen geeignet, in einem übersichtlichen Wandhalter angeordnet! Sehr schnelle Lieferung und günstiger Preis!
24 February 2023 08:33
einwandfrei
einwandfrei
22 February 2023 09:46
Spannmittel sind Okay für den Preis,
Spannmittel sind Okay für den Preis, die Wandhalterung ist aber sehr schlecht hergestellt und verarbeitet.
14 February 2023 19:14
Alles Bestens, gerne wieder
Alles Bestens, gerne wieder