paulimot Quick-change steel holder set, suitable for "Multifix" system, size Aa
€125.00*
Prices incl. 19% VAT. plus Shipping costs
Delivery time: 1-3 working days **
More than 10 pieces available (online and in specialist shops)
Intended use
A quick-change steel holder set is a precise and efficient clamping system for lathes to enable the quick change of turning steels, boring bars or other tools. The steel holder with the clamped tool is correctly aligned to the centre of the machine spindle just once. This positioning is fixed using a lock nut and is therefore set to the correct height each time the steel holder is reinserted into the base body. The base body of the system is firmly mounted on the top slide of the lathe and forms the basis of the system. The steel holder is the interchangeable component in which the turning tools are clamped. The system's fine-toothed ratchet system enables repeatable alignment of the tool without the need for readjustment.
Technical data
| Hardness of base body [HRC]: | 50 |
|---|---|
| Hardness of steel holder [HRC]: | 40 |
| Suitable for dimension "s" [mm]: | 10 - 30 |
| Suitable for top slide width [mm]: | 45 - 60 |
| Surface: | ground |
| System size: | Aa |
| Tool material Basic body: | C45E steel |
| Tool material Steel holder: | C45E steel |
| Turning steel holder [mm]: | 4 - 12 |
Clamping system for quick tool change
Set consisting of base body and two steel holders
Recommended for top slide widths from 45 to 60 mm
Suitable for turning steel heights from 4 to 12 mm
Matching mounting sets available for paulimot lathes
Description of the
This set consists of the basic body, four steel holders, a clamping spanner and a square spanner. Size Aa is recommended for lathes with a top slide width of 45 to 60 mm. Tools with a shank height of up to 12 mm can be clamped in the steel holders.
Tip:
Are you unsure which quick-change steel holder size is right for you?
Then our guide is just right for you! In it, we show you how you can easily determine the right size.
Our guide to quick-change steel holder sizes: Determining the right quick-change steel holder size - our tips.
Alternatively, you can also use our quick-change steel holder advisor: Quick-release steel holder advisor
Scope of delivery
- 1 x base body
- 2 x steel holder AaD 1250
- 1 x clamping spanner
- 1 x square spanner
More about the brand and products from
This set consists of the basic body, four steel holders, a clamping spanner and a square spanner. Size Aa is recommended for lathes with a top slide width of 45 to 60 mm. Tools with a shank height of up to 12 mm can be clamped in the steel holders.
Tip:
Are you unsure which quick-change steel holder size is right for you?
Then our guide is just right for you! In it, we show you how you can easily determine the right size.
Our guide to quick-change steel holder sizes: Determining the right quick-change steel holder size - our tips.
Alternatively, you can also use our quick-change steel holder advisor: Quick-release steel holder advisor
This set consists of the basic body, two steel holders, a clamping spanner and a square spanner. Size Ab is recommended for lathes with a top slide width of 60 to 75 mm. Tools with a shank height of up to 16 mm can be clamped in the steel holders.
Tip:
Are you unsure which quick-change steel holder size is right for you?
Then our guide is just the thing for you! In it, we show you how you can easily determine the right size.
Our guide to quick-change steel holder sizes: Determining the right quick-change steel holder size - our tips.
Alternatively, you can also use our quick-change steel holder advisor: Quick-release steel holder advisor
This set consists of the basic body, two steel holders, a clamping spanner and a square spanner. Size A is recommended for lathes with a top slide width of 75 to 95 mm. Tools with a shank height of up to 20 mm can be clamped in the steel holders.
Tip:
Are you unsure which quick-change steel holder size is right for you?
Then our guide is just right for you! In it, we show you how you can easily determine the right size.
Our guide to quick-change steel holder sizes: Determining the right quick-change steel holder size - our tips.
Alternatively, you can also use our quick-change steel holder advisor: Quick-release steel holder advisor
€125.00*
Content: 1 Piece
€151.00*
Content: 1 Piece
€152.00*
Content: 1 Piece
17 March 2025 17:10
System Multifix
Ich bin sehr zufrieden mit dem Produkt
27 November 2024 11:36
Gute Verarbeitung.
Gute Verarbeitung.
25 April 2024 16:59
Qualität gut, Prei / Leistung gut
Qualität gut, Prei / Leistung gut
15 March 2024 18:22
Sehr gut, leicht zu handhaben
Sehr gut, leicht zu handhaben
10 January 2024 16:33
So nicht schlecht, nur die Rastung. Naja
So nicht schlecht, nur die Rastung. Naja ist ja nur aa.
23 November 2023 18:52
Werkzeugmachermeisterrentner
Ich arbeite seit 1966 mit Multifix auf der Arbeit. Jetzt auch zu Hause. Hätte ich schon vor Jahren machen sollen sagt der Werkzeugmachermeisterrentner
21 October 2023 07:55
AAA+
AAA+
17 January 2023 19:49
Große Erleichterung
Große Erleichterung
14 December 2022 10:41
Gute Ware
Gute Ware
10 November 2022 09:12
Damit geht einiges schneller an der Drehbank.
Damit geht einiges schneller an der Drehbank.