Clamping claw set 58-piece M12 / 14 mm in wall holder
€36.00*
Prices incl. 19% VAT. plus Shipping costs
Delivery time: 1-3 working days **
More than 10 pieces available (online and in specialist shops)
Intended use
Clamping claws are used for fast and secure clamping of workpieces, tools and fixtures on machine tables with T-slots.
Technical data
| Clamping height (max.) [mm]: | 70 |
|---|---|
| For groove width [mm]: | 14 |
| Hardness [HRC]: | 18 - 20 |
| Thread size stud bolts: | M12 |
| Tool material: | C235 Steel / cast steel |
58-piece set
For 14 mm T-slot width and M12 thread
Fast and secure clamping of workpieces, tools or fixtures
Supplied with practical wall bracket
Made from steel and cast steel
Description of the
The individual components in this set are made of C235 steel and cast steel.
Assembly (see picture "Assembly example")
The clamp with a slotted hole (also known as a clamping claw) is attached so that one end rests on the body to be clamped. The other end rests on a support, the step block. The threaded rod is attached as close as possible to the workpiece and fixed at the lower end to a plate or the machine table using a T-slot nut. A collar nut is fitted to the upper end of the stud bolt. This applies the clamping force by tightening it firmly. This means that the workpiece can no longer slip and work on the workpiece can be carried out safely and quickly.
The clamping claw set has a maximum clamping height of 70 mm.
The individual clamping elements are neatly stored in the practical wall holder.
Scope of delivery
- 1 x wall bracket
- 6 x T-nut
- 6 x collar nut
- 4 x extension nut
- 6 x step clamps
- 12 x step block
- 24 x stud bolt
More about the brand and products from
The individual components in this set are made of C235 steel and cast steel.
Assembly (see picture "Assembly example")
The clamp with a slotted hole (also known as a clamping claw) is attached so that one end rests on the body to be clamped. The other end rests on a support, the step block. The threaded rod is attached as close as possible to the workpiece and fixed at the lower end to a plate or the machine table using a T-slot nut. A collar nut is fitted to the upper end of the stud bolt. This applies the clamping force by tightening it firmly. This means that the workpiece can no longer slip and work on the workpiece can be carried out safely and quickly.
The clamping claw set has a maximum clamping height of 70 mm.
The individual clamping elements are neatly stored in the practical wall holder.
The individual components in this set are made of C235 steel and cast steel.
Assembly (see image "Assembly example")
The clamping arm (also known as a clamping claw) with a slotted hole is attached so that one end rests on the body to be clamped. The other end rests on a support, the step block. The threaded rod is attached as close as possible to the workpiece and fixed at the lower end to a plate or the machine table using a T-slot nut. A collar nut is fitted to the upper end of the stud bolt. This applies the clamping force by tightening it firmly. This means that the workpiece can no longer slip and work on the workpiece can be carried out safely and quickly.
The clamping claw set has a maximum clamping height of 64 mm.
The individual clamping elements are neatly stored in the practical wall holder.
This 10-piece clamping claw set with M6 thread for 8 mm T-slot width is suitable for secure and fast clamping of workpieces, tools and fixtures, especially on our dividing heads.
The set is suitable for the following dividing heads:
- Rotary indexing table Ø 80 mm horizontal / vertical (item no. 16200)
- Rotary indexing table Ø 80 mm swivelling horizontal / vertical (item no. 16201)
- Rotary table dividing head Ø 100 mm horizontal / vertical (item no. 16202)
- Rotary table dividing head Ø 100 mm swivelling horizontal / vertical (item no. 16203)
- Rotary indexing table Ø 105 mm swivelling horizontal / vertical (item no. 16205)
The clamping element with a slotted hole (also known as a clamping claw) is attached so that one end rests on the body to be clamped. The other end rests on a support, the step block. The threaded rod is attached as close as possible to the workpiece and fixed at the lower end to one of our rotary tables (item no. 16200, 16201, 16202, 16203 or 16205) using a T-slot nut. A collar nut is fitted to the upper end of the stud bolt. This applies the clamping force by tightening it firmly. Now the workpiece can no longer slip and you can carry out your work safely and quickly.
The clamping claw set can be used for workpieces with a maximum height of 20 mm.
Please note that the clamping claw set is not compatible with the VERTEX rotary tables!
This 10-piece clamping claw set with M6 thread is suitable for secure and fast clamping of workpieces, tools and fixtures.
Material properties
The individual components in this set are made from C45 heat-treated steel (material number 1.0503) and have undergone heat treatment. Among other things, this leads to an increase in tensile strength.
Manufacturer's hardness specifications for all components: 32 HRC
Assembly
The clamping element (step block) with a slotted hole is fastened so that one end rests on the body to be clamped and the other end rests on a step clamp. The stud bolt is attached as close as possible to the workpiece and fixed at the lower end to a plate or the machine table. A collar nut is fitted to the upper end of the stud bolt. This applies the clamping force by tightening it firmly so that the workpiece can no longer slip. This allows you to work safely and quickly on the workpiece.
The clamping claw set can be used for workpieces with a maximum height of 64 mm.
The individual components in this set are made from C45 heat-treated steel (material number 1.0503) and have undergone heat treatment. Among other things, this leads to an increase in tensile strength.
Assembly (see picture "Assembly example")
The clamping arm (also known as a clamping claw) with a slotted hole is fastened so that one end rests on the body to be clamped. The other end rests on a support, the step block. The threaded rod is attached as close as possible to the workpiece and mounted at the lower end on a plate or the machine table. This applies the clamping force by tightening it firmly. This prevents the workpiece from slipping. This allows you to carry out your work on the workpiece safely and quickly.
The clamping claw set has a maximum clamping height of 64 mm.
The individual clamping elements are neatly stored in the practical plastic case.
The individual components in this set are made of C235 steel and cast steel.
Assembly (see image "Assembly example")
The clamping arm (also known as a clamping claw) with a slotted hole is attached so that one end rests on the body to be clamped. The other end rests on a support, the step block. The threaded rod is attached as close as possible to the workpiece and fixed at the lower end to a plate or the machine table using a T-slot nut. A collar nut is fitted to the upper end of the stud bolt. This applies the clamping force by tightening it firmly. This means that the workpiece can no longer slip and work on the workpiece can be carried out safely and quickly.
The clamping claw set has a maximum clamping height of 64 mm.
The individual clamping elements are neatly stored in the practical wall holder.
10-piece clamping claw set for 10 mm T-slot width and M8 thread.
This set is used for quick clamping of workpieces, tools or fixtures.
Material properties
The individual components in this set are made from C45 heat-treated steel (material number 1.0503) and have undergone heat treatment. Among other things, this leads to an increase in tensile strength.manufacturer's hardness specifications for all components: 32 HRC
Assembly
The clamping element (step block) with a slotted hole is fastened so that one end rests on the body to be clamped and the other end rests on a step clamp. The stud bolt is attached as close as possible to the workpiece and fixed at the lower end to a plate or the machine table. A collar nut is fitted to the upper end of the stud bolt. This applies the clamping force by tightening it firmly so that the workpiece can no longer slip. This allows you to work safely and quickly on the workpiece.
The clamping claw set can be used for workpieces with a maximum height of 64 mm.
The individual components in this set are made of C235 steel and cast steel.
Assembly (see image "Assembly example")
The clamping arm (also known as a clamping claw) with a slotted hole is attached so that one end rests on the body to be clamped. The other end rests on a support, the step block. The threaded rod is attached as close as possible to the workpiece and fixed at the lower end to a plate or the machine table using a T-slot nut. A collar nut is fitted to the upper end of the stud bolt. This applies the clamping force by tightening it firmly. This means that the workpiece can no longer slip and work on the workpiece can be carried out safely and quickly.
The clamping claw set has a maximum clamping height of 64 mm.
The individual clamping elements are neatly stored in the practical wall holder.
The individual components in this set are made from C45 heat-treated steel (material number 1.0503) and have undergone heat treatment. Among other things, this leads to an increase in tensile strength.
Assembly (see picture "Assembly example")
The clamping arm (also known as a clamping claw) with a slotted hole is fastened so that one end rests on the body to be clamped. The threaded rod is attached as close as possible to the workpiece and fastened at the lower end to a plate or the machine table using a T-nut. A collar nut is fitted to the upper end of the stud bolt. This applies the clamping force by tightening it firmly. This prevents the workpiece from slipping. This allows you to work on the workpiece safely and quickly.
The clamping claw set has a maximum clamping height of 64 mm.
The individual clamping elements are neatly stored in the practical plastic case.
10-piece clamping claw set for 12 mm T-slot width and M10 thread.
This set is used for quick clamping of workpieces, tools or fixtures.
Material properties
The individual components in this set are made from C45 heat-treated steel (material number 1.0503) and have undergone heat treatment. Among other things, this leads to an increase in tensile strength.manufacturer's hardness specifications for all components: 32 HRC
Assembly
The clamping element (step block) with a slotted hole is fastened so that one end rests on the body to be clamped and the other end rests on a step clamp. The stud bolt is attached as close as possible to the workpiece and fixed at the lower end to a plate or the machine table. A collar nut is fitted to the upper end of the stud bolt. This applies the clamping force by tightening it firmly so that the workpiece can no longer slip. This allows you to work safely and quickly on the workpiece.
The clamping claw set can be used for workpieces with a maximum height of 64 mm
The individual components in this set are made from C45 heat-treated steel (material number 1.0503) and have undergone heat treatment. Among other things, this leads to an increase in tensile strength.
Assembly (see picture "Assembly example")
The clamping arm (also known as a clamping claw) with a slotted hole is fastened so that one end rests on the body to be clamped. The other end rests on a support, the step block. The threaded rod is attached as close as possible to the workpiece and fixed at the lower end to a plate or the machine table using a T-slot nut. A collar nut is fitted to the upper end of the stud bolt. This applies the clamping force by tightening it firmly. This prevents the workpiece from slipping. This allows you to work on the workpiece safely and quickly.
The clamping claw set has a maximum clamping height of 70 mm.
The individual clamping elements are neatly stored in the practical plastic case.
10-piece clamping claw set for 14 mm T-slot width and M12 thread.
This set is used for quick clamping of workpieces, tools or fixtures.
Material properties
The individual components in this set are made from C45 heat-treated steel (material number 1.0503) and have undergone heat treatment. Among other things, this leads to an increase in tensile strength.manufacturer's hardness specifications for all components: 32 HRC
Assembly
The clamping element (step block) with a slotted hole is fastened so that one end rests on the body to be clamped and the other end rests on a step clamp. The stud bolt is attached as close as possible to the workpiece and fixed at the lower end to a plate or the machine table. A collar nut is fitted to the upper end of the stud bolt. This applies the clamping force by tightening it firmly so that the workpiece can no longer slip. This allows you to work safely and quickly on the workpiece.
The clamping claw set can be used for workpieces with a maximum height of 70 mm
€36.00*
Content: 1 pcs
€25.50*
Content: 1 pcs
€13.00*
Content: 1 Piece
€15.50*
Content: 1 pcs
€36.50*
Content: 1 pcs
€30.00*
Content: 1 pcs
€16.50*
Content: 1 pcs
€33.00*
Content: 1 pcs
€39.50*
Content: 1 pcs
€18.00*
Content: 1 pcs
€42.50*
Content: 1 pcs
€26.00*
Content: 1 pcs
18 April 2025 11:43
Unschlagbares Angebot und sehr nützlich, Qualität und Preis-Leistung sind sehr gut.
Die Verarbeitung ist einwandfrei, alle Teile passen zusammen. Die Teile müssen gesäuber, ggf. etwas entgratet und leicht eingeölt werden. Für den Preis erhält man sehr brauchbare Ware, die im Heimwerkerbereich bzw. für gelegentliche Nutzung voll ausreichen und dabei bezahlbar sind. Von diesen Sets habe ich in allen Größen welche, die von Paulimot zu einem fairen Preis angeboten werden. Als Grundausstattung für den Handwerker nicht zu schlagen und sehr nützlich. Ich würde dieses Spannpratzen-Set jederzeit wieder kaufen, da gibt es keine Bedenken. Von meiner Seite eine Empfehlung und beide Daumen hoch.
9 April 2025 12:00
Teile OK - Aufbewahrungshalter absolut unbrauchbar
Alle Teile des Spannpratzensets sind wie erwartet, aber der Aufbewahrungshalter ist absolut unbrauchbar. Die Löcher in der hinteren Metallbefestigungsplatte, die für die Schrauben vorgesehen sind, welche in das Kunststoffteil gehen, sind falsch positioniert. Damit die Schrauben nicht außerhalb des Kunststoffteils landen, werden sie schräg in das Kunststoffteil eingedreht, wodurch das Plastik trotzdem gerissen ist. Die Rückseite des roten Kunststoffkörpers hat sich während der Herstellung nach innen verbogen, und das zusätzliche schwarze Kunststoffteil, das dazu gedacht ist, die Enden der Gewindestangen zu halten, ist wie ein Propeller verdreht und lose innerhalb des roten Hauptkörpers. Nach dem Bohren neuer Befestigungslöcher und dem Begradigen der Kunststoffteile mit einem Heißluftgebläse sowie dem erneuten Zusammenbau der Teile ist der Aufbewahrungshalter nutzbar. Zusätzlich musste ich den schwarzen Halter für die Gewindestangen mit Nieten an die Metallbefestigungsplatte nieten. Dennoch entspricht dies nicht der Qualität, die ich von Paulimot-Produkten gewohnt bin. Der Kundenservice für diesen Artikel war jedoch ausgezeichnet. Ich habe beim Bestellen des Spannpratzensets einen Größenfehler gemacht, aber als ich meinen Fehler bemerkte und bei Paulimot Kundenservice anrief, konnten sie meinen Fehler noch korrigieren.
12 January 2025 10:41
Preis-Leistung gut
Preis-Leistung gut
28 August 2024 18:26
Sehr praktisch und vollkommen ausreichend für den
Sehr praktisch und vollkommen ausreichend für den Hobbyschlosser.
14 June 2024 16:35
Spann Zubehör
Bin sehr zufrieden und um diesen Preis finde ich es mega gut
11 June 2024 17:01
Soweit OK Hätte lieber die Box aus Blech Aber
Soweit OK Hätte lieber die Box aus Blech Aber bei dem günstigen Preis war nur Kunststoff drinnen
28 May 2024 02:46
alles passt
Das ist schon der zweite Satz bei mir. alles super aufgeräumt und übersichtich. Preis Leistung super.
7 April 2024 08:07
Wie immer schnell und zuverlässig in guter
Wie immer schnell und zuverlässig in guter Qualität
16 October 2023 17:36
Gutund schnell
Gut produkt, schnelle lieferung!
1 February 2023 14:17
Preis und Leistung sind gut . Zahlungsmethode für
Preis und Leistung sind gut . Zahlungsmethode für einen Betrieb ungünstig.