Cross table made of aluminium 310 x 90 mm
€30.50*
Prices incl. 19% VAT. plus Shipping costs
Delivery time: 1-3 working days **
More than 10 pieces available (online and in specialist shops)
Intended use
A cross table is used on both milling and drilling machines. As a cross table can be moved in both the X and Y axes, the workpiece can be positioned exactly under the tool. This allows precise drilling and milling work to be carried out.
Technical data
| Material cross table: | Aluminium |
|---|---|
| Number of T-slots: | 3 |
| Scale division handwheels [mm]: | 0,05 |
| Size of the T-slots [mm]: | 8 |
| T-slot spacing [mm]: | 33,5 |
| Table size [mm]: | 310 x 90 |
| Total height [mm]: | 78 |
| X-axis travel [mm]: | 200 |
| Y-axis travel [mm]: | 52 |
Work table 310 x 90 mm made of aluminium
Dovetail guides can be adjusted backlash-free using pressure bars
Three continuous T-slots
Suitable for light drilling and milling work
Including clamping set
Description of the
This cross table is made of aluminium and is therefore particularly suitable for light drilling and milling work. The work table has three continuous T-slots with a width of 8 mm for T-nuts with an M6 thread. The workpiece is fixed in the desired position on the worktable using clamping claws, hold-down clamps or similar. The cross table can be moved in the X and Y directions using the handwheels fitted with a vernier. The travel distance can be read quickly and easily via a sliding measuring scale on the X-axis. The dovetail guides can be adjusted backlash-free using pressure bars. The spindle of the Y-axis is protected from falling chips by a cover.
Scope of delivery
- 1 x cross table 310 x 90 mm
- 2 x hand crank with screw
- 2 x clamping claw 55 x 20 x 4 mm
- 4 x hexagon head screw M8 x 40
- 4 x nut M8
- 1 x Allen key
More about the brand and products from
This cross table is made of aluminium and is therefore particularly suitable for light drilling and milling work. The work table has three continuous T-slots with a width of 8 mm for T-nuts with an M6 thread. The workpiece is fixed in the desired position on the worktable using clamping claws, hold-down clamps or similar. The cross table can be moved in the X and Y directions using the handwheels fitted with a vernier. The travel distance can be read quickly and easily via a sliding measuring scale on the X-axis. The dovetail guides can be adjusted backlash-free using pressure bars. The spindle of the Y-axis is protected from falling chips by a cover.
This cross table is made of aluminium and is therefore particularly suitable for light drilling and milling work. The work table has three continuous T-slots with a width of 8 mm for T-nuts with an M6 thread. The workpiece is fixed in the desired position on the worktable using clamping claws, hold-down clamps or similar. The cross table can be moved in the X and Y directions using the handwheels fitted with a vernier. The travel distance can be read quickly and easily via a sliding measuring scale on the X-axis. The dovetail guides can be adjusted backlash-free using pressure bars. The spindle of the Y-axis is protected from falling chips by a cover.
This cross table is made of aluminium and is therefore particularly suitable for light drilling and milling work. The spindles and round columns are made of steel. The worktable has three continuous T-slots with a width of 8 mm for T-nuts with M6 thread. The workpiece is fixed in the desired position on the worktable using clamping claws, hold-down clamps or similar. The cross table can be moved in the X and Y directions using the handwheels. The travel distance can be read quickly and easily via a sliding measuring scale on the X-axis. Both axes are precisely guided by round columns. In addition, the spindle of the X-axis has ball bearings on both sides. Both the X and Y axes can be fixed using a clamping screw.
This cross table is made of aluminium and is therefore particularly suitable for light drilling and milling work. The work table has three continuous T-slots with a width of 8 mm for T-nuts with an M6 thread. The workpiece is fixed in the desired position on the worktable using clamping claws, hold-down clamps or similar. The cross table can be moved in the X and Y directions using the handwheels fitted with a vernier. The travel distance can be read quickly and easily via a sliding measuring scale on the X-axis. The dovetail guides can be adjusted backlash-free using pressure bars. The spindle of the Y-axis is protected from falling chips by a cover.
This cross table is made of aluminium and is therefore particularly suitable for light drilling and milling work. The work table has three continuous T-slots with a width of 8 mm for T-nuts with an M6 thread. The workpiece is fixed in the desired position on the worktable using clamping claws, hold-down clamps or similar. The cross table can be moved in the X and Y directions using the handwheels fitted with a vernier. The travel distance can be read quickly and easily via a sliding measuring scale on the X-axis. The dovetail guides can be adjusted backlash-free using pressure bars. The spindle of the Y-axis is protected from falling chips by a cover.
The clamping table and support of this cross table are made of aluminium. This makes it particularly suitable for light drilling and milling work. The base is made of cast iron, the spindles and round columns are made of steel. The worktable has three continuous T-slots with a width of 8 mm for T-nuts with M6 threads. The workpiece is fixed in the desired position on the worktable using clamping claws, hold-down clamps or similar. The cross table can be moved in the X and Y directions using the handwheels. The travel distance can be read quickly and easily via a sliding measuring scale on the X-axis. Both axes are precisely guided by round columns and also have ball bearings on both sides. Both the X and Y axes can be fixed using a clamping screw.
€30.50*
Content: 1 pcs
€25.00*
Content: 1
€43.50*
Content: 1 pcs
€29.50*
Content: 1
€37.00*
Content: 1 pcs
€94.00*
Content: 1 pcs
21 December 2023 15:05
Kreuzttisch
Den Kreuztisch habe ich noch nicht benutzt aber er sieht für seinen Preis recht gut aus.
18 October 2023 16:54
Habe den Kreuztisch in Kombination mit einem
Habe den Kreuztisch in Kombination mit einem Borständer gekauft für kleine Fräsarbeiten von Hölzern, bis absolut zufrieden, kann man super einstellen läuft wie geschmiert
11 September 2023 17:20
Alles bestens, schnelle Lieferung vielen Dank
Alles bestens, schnelle Lieferung vielen Dank
10 February 2023 08:50
Kreuztisch 310x90 mm
Super schnelle Lieferung. Top Preis/Leistung. Gern wieder.
2 February 2023 17:38
Seher gut
Seher gut
24 March 2022 10:18
sehr gut
sehr gut
8 November 2021 00:00
Gute Qualität zum kleinen Preis
Wie immer bin ich sehr zufrieden mit den Paulimot Produkten
5 April 2021 00:00
Gutes Preis-Leistungsverhältnis
für den Preis sehr ordentliche Ausführung. Reicht für meine Ansprüche vollkommen.
29 March 2021 00:00
Top?
Für den Preis, gerne wieder, man kann damit recht Preziese Arbeiten.
14 February 2021 00:00
Perfect tool
I'm very satisfied. High quality for a good price. Very easy to use and attach to the machine. The tool is stable. I bought it online and product was delivered to Lithuania without damage.