paulimot Mounting set suitable for "System Multifix", size Ab for SIEG SC4
€16.00*
Prices incl. 19% VAT. plus Shipping costs
Delivery time: 1-3 working days **
More than 10 pieces available (online and in specialist shops)
Intended use
This mounting set enables quick and easy attachment of the quick-change steel holder set suitable for "System Multifix" size Ab to the SIEG SC4 lathe.
Technical data
| System size: | From |
|---|
Quick and easy assembly
For the lathe SIEG SC4
For the quick-change steel holder sets suitable for "System Multifix" size Ab
Description of the
This set consists of a stud bolt and a lock nut.
Assembly steps:
- Removing the 4-fold steel holder of the lathe
- Remove the screwed-in stud bolt
- Screw in the supplied stud bolt
- Positioning the base body
- Secure the base body with the supplied lock nut
The base body must be aligned on the top slide so that the steel holders inserted later are at right angles to the Z-axis of the machine. To prevent the base body from twisting, it can also be pinned to the top slide.
Scope of delivery
- 1 x stud bolt with M10 thread
- 1 x locking nut M10
More about the brand and products from
This set consists of a stud bolt and a lock nut.
Assembly steps:
- Removing the 4-fold steel holder of the lathe
- Remove the screwed-in stud bolt
- Screw in the supplied stud bolt
- Positioning the base body
- Secure the base body with the supplied lock nut
The base body must be aligned on the top slide so that the steel holders inserted later are at right angles to the Z-axis of the machine. To prevent the base body from twisting, it can also be pinned to the top slide.
This set consists of a stud bolt and a lock nut.
Assembly steps:- Removing the 4-fold steel holder of the lathe
- Remove the screwed-in stud bolt
- Screw in the supplied stud bolt
- Positioning the base body
- Secure the base body with the supplied lock nut
The base body must be aligned on the top slide so that the steel holders inserted later are at right angles to the Z-axis of the machine. To prevent the base body from twisting, it can also be pinned to the top slide.
This set consists of a stud bolt and a lock nut.
Assembly steps:- Remove the 4-fold steel holder of the lathe
- Remove the screwed-in stud bolt
- Screw in the supplied stud bolt
- Positioning the base body
- Secure the base body with the supplied lock nut
The base body must be aligned on the top slide so that the steel holders inserted later are at right angles to the Z-axis of the machine. To prevent the base body from twisting, it can also be pinned to the top slide.
€16.00*
Content: 1 Piece
€16.00*
Content: 1 Piece
€16.00*
Content: 1 Piece
5 May 2025 22:52
bonne fabrication et finition , avec
bonne fabrication et finition , avec un très bon rapport/qualité .
31 January 2023 11:12
Einfach super
Super gut
13 January 2023 12:16
Ich bin sehr zufrieden
Ich bin sehr zufrieden
7 June 2022 09:12
This is a good DIY project, but
This is a good DIY project, but then again handy to get of the shelf as it get your setup ready to go right out of the box.
24 April 2022 14:56
Item that requires modification of the PV190-V
This item does NOT fit the PM190-V. But with a little modification of the lathe, it works super.
23 January 2022 00:00
Paulimot-Bolzen
Hallo. Habe einige Paulimot Artikel erworben. z.b. Stahlhalter Ab. Bin mit der Präzision sehr zufrieden. Saubere Arbeit. Ihn unserer Lehrwerkstatt haben wir nichts anderes. Einfach klasse. Name bürgt für Qualität. Mfg.Herbert
22 October 2021 00:00
super ,nach einem Anruf
Der Bolzen brauch man für mein Drehmaschine ,das M12 wurde in meine Maschine neu geschnitten. Und es passt!
20 August 2021 00:00
passt
passt
21 July 2021 00:00
Bewertung
Sehr gutes passgenaues Produkt
26 March 2021 00:00
Gut
Passt.