Quick-release drill chuck for clockwise and anti-clockwise rotation 1 - 16 mm MK2
€33.50*
Prices incl. 19% VAT. plus Shipping costs
Delivery time: 1-3 working days **
More than 10 pieces available (online and in specialist shops)
Intended use
Drill chucks are used to clamp tools with a cylindrical shank, such as drills, countersinks, reamers, etc. Drill chucks are used in machine tools such as lathes, milling machines or drilling machines. Depending on the type of machine, a drill chuck with a suitable holder is required. A general distinction is made between drill chucks in which the tools are clamped with a spanner and drill chucks in which the tools can be clamped without a spanner, so-called quick-action drill chucks.
Technical data
| Clamping range [mm]: | 1 - 16 |
|---|---|
| Concentricity deviation max. [mm]: | 0,1 |
| Cone mandrel: | MK2 / B18 |
| Inner cone: | B18 |
| Ø drill max. [mm]: | 16 |
Suitable for clockwise and anti-clockwise rotation thanks to locking mechanism
Fast, secure clamping and unclamping
No clamping spanner required
Suitable for use on lathes and drills
Taper arbor and drill chuck connected via cone
Description of the
This quick-release drill chuck has a locking mechanism that prevents the drill chuck from loosening during anti-clockwise rotation. As a result, unlike conventional quick-release drill chucks, this drill chuck is suitable for clockwise and anti-clockwise rotation. The chuck is locked and unlocked by turning the red ring to "LOCK" or "UNLOCK". The drill chuck is supplied with a tapered arbour. The taper arbor and drill chuck are connected to each other via a form-fit B18 cone, i.e. the taper arbor can be separated from the drill chuck. The taper arbor has a drive-out tab and is therefore suitable for use both in drilling machines and in the tailstock of lathes. The clamping range of this chuck is 1 to 16 mm. As the three clamping jaws close completely, it is also possible to clamp tools with a shank diameter of less than 1 mm.
Scope of delivery
- 1 x quick-release drill chuck for clockwise and anti-clockwise rotation 1 - 16 mm MK2
More about the brand and products from
This quick-release drill chuck has a locking mechanism that prevents the drill chuck from loosening during anti-clockwise rotation. As a result, unlike conventional quick-release drill chucks, this drill chuck is suitable for clockwise and anti-clockwise rotation. The chuck is locked and unlocked by turning the red ring to "LOCK" or "UNLOCK". The drill chuck is supplied with a tapered arbour. The taper arbor and drill chuck are connected to each other via a form-fit B18 cone, i.e. the taper arbor can be separated from the drill chuck. The taper arbor has a drive-out tab and is therefore suitable for use both in drilling machines and in the tailstock of lathes. The clamping range of this chuck is 1 to 16 mm. As the three clamping jaws close completely, it is also possible to clamp tools with a shank diameter of less than 1 mm.
With this precision quick-action drill chuck, the taper arbor and the drill bit holder consist of one part, i.e. the taper arbor cannot be separated from the drill chuck. In contrast to drill chucks with an inserted tapered arbor, this design enables higher concentricity to be achieved. The taper arbor has a drive-out tab and is therefore suitable for use both in drilling machines and in the tailstock of lathes. The clamping range of this chuck is 1 to 13 mm. As the three clamping jaws close completely, it is also possible to clamp tools with a shank diameter of less than 1 mm.
With this precision quick-action drill chuck, the taper arbor and the drill bit holder consist of one part, i.e. the taper arbor cannot be separated from the drill chuck. In contrast to drill chucks with an inserted tapered arbor, this design enables higher concentricity to be achieved. The taper arbor has a drive-out tab and is therefore suitable for use both in drilling machines and in the tailstock of lathes. The clamping range of this chuck is 1 to 16 mm. As the three clamping jaws close completely, it is also possible to clamp tools with a shank diameter of less than 1 mm.
This quick-action drill chuck is supplied with a tapered arbour. The taper arbor and drill chuck are connected to each other via a positive-locking B16 cone, i.e. the taper arbor can be separated from the drill chuck. The taper arbor has a drive-out tab and is therefore suitable for use both in drilling machines and in the tailstock of lathes. The clamping range of this chuck is 1 to 13 mm. As the three clamping jaws close completely, it is also possible to clamp tools with a shank diameter of less than 1 mm.
This quick-action drill chuck is supplied with a tapered arbour. The taper arbor and drill chuck are connected to each other via a positive-locking B18 cone, i.e. the taper arbor can be separated from the drill chuck. The taper arbor has a drive-out tab and is therefore suitable for use both in drilling machines and in the tailstock of lathes. The clamping range of this chuck is 1 to 16 mm. As the three clamping jaws close completely, it is also possible to clamp tools with a shank diameter of less than 1 mm.
This quick-release drill chuck has a locking mechanism that prevents the drill chuck from loosening during anti-clockwise rotation. As a result, unlike conventional quick-release drill chucks, this drill chuck is suitable for clockwise and anti-clockwise rotation. The chuck is locked and unlocked by turning the red ring to "LOCK" or "UNLOCK". The drill chuck is supplied with a tapered arbour. The taper arbor and drill chuck are connected to each other via a form-fit B16 cone, i.e. the taper arbor can be separated from the drill chuck. The taper arbor has a drive-out tab and is therefore suitable for use both in drilling machines and in the tailstock of lathes. The clamping range of this chuck is 1 to 13 mm. As the three clamping jaws close completely, it is also possible to clamp tools with a shank diameter of less than 1 mm.
€33.50*
Content: 1 pcs
€51.50*
Content: 1 Piece
€55.50*
Content: 1 Piece
€24.00*
Content: 1 pcs
€26.50*
Content: 1 pcs
€29.00*
Content: 1 pcs
27 December 2024 12:27
Sehr gute Verarbeitung und Stabilität
Sehr gute Verarbeitung und Stabilität
15 March 2024 18:23
Genau richtig, hat sich schon bewährt
Genau richtig, hat sich schon bewährt
5 October 2023 11:24
Mitlaufende Körnerspitze
Alles gut, Ware wie immer in Ordnung. Vielen Dank, gerne wieder.
14 March 2023 08:50
Super Teil! Leichtes Spannen, SEHR zufrieden
Super Teil! Leichtes Spannen, SEHR zufrieden
7 February 2023 13:42
Sehr gutes Bohrfutter mit gutem Rundlauf. Endlich
Sehr gutes Bohrfutter mit gutem Rundlauf. Endlich fallen mir die Gewindebohrer im Linkslauf nicht mehr aus dem Futter...
1 February 2023 09:26
Gute Qualität zum fairen Preis!
Gute Qualität zum fairen Preis!
31 January 2023 11:02
Was ich bis jetzt beurteilen kann. Sehr gutes
Was ich bis jetzt beurteilen kann. Sehr gutes Preis-Leistungsverhältniss
31 January 2023 10:20
Für diesen Preis augenscheinlich ein sehr ordentliches
Für diesen Preis augenscheinlich ein sehr ordentliches Produkt das funktioniert.
5 January 2023 08:44
Gute Qualität
Gute Qualität
13 December 2022 09:30
Preis-Leistungsverhältnis sehr gut. Sehr gute Eigenschaften bei
Preis-Leistungsverhältnis sehr gut. Sehr gute Eigenschaften bei dem Preis. Sehr gute Verpackung in Plastikbox