Machine vice 50 mm jaw width, self-centring
€109.00*
% €113.00* (3.54% saved)Prices incl. 19% VAT. plus Shipping costs
Delivery time: 1-3 working days **
Less than 10 pieces available (online and in specialist shops)
Description of the
Height of jaws: 25 mm
Max. Clamping range: 55 mm
Total height: 88 mm
The vice can be rotated 360° on the base plate, a scale is attached all the way round (1 graduation mark = 1°).
The guides on the vice can be adjusted using pressure bars.
With longitudinal groove on the underside of the base plate for alignment on the machine table.
The hand crank is of course included in the scope of delivery.
More about the brand and products from
Height of jaws: 25 mm
Max. Clamping range: 55 mm
Total height: 88 mm
The vice can be rotated 360° on the base plate, a scale is attached all the way round (1 graduation mark = 1°).
The guides on the vice can be adjusted using pressure bars.
With longitudinal groove on the underside of the base plate for alignment on the machine table.
The hand crank is of course included in the scope of delivery.
Height of jaws: 25 mm
Max. Clamping range: 50 mm
Total height: 75 mm
The vice can be rotated 360° on the base plate, a scale is attached all the way round (1 graduation mark = 1°).
The guides on the vice can be adjusted using pressure bars.
With longitudinal groove on the underside of the base plate for alignment on the machine table.
The hand crank is of course included in the scope of delivery.
Height of jaws: 25 mm
Max. Clamping range: 50 mm
Total height: 95 mm
The vice can be rotated 360° on the base plate, a scale is attached all the way round (1 graduation mark = 1°).
The vertical adjustment range is up to 90°. A scale is also provided here.
The guides on the vice can be adjusted using pressure bars.
The hand crank is of course included in the scope of delivery.
Jaw height: 24 mm
Max. Clamping range: 53 mm
Total height: 120 mmHeight to support: 95 mm
The vice can be rotated 360° on the base plate, a scale is attached all the way round (1 graduation mark = 1°).
The vertical adjustment range is up to 90°, the horizontal adjustment range is +/- 45°. A scale is also provided here.
The guides on the vice can be adjusted using pressure bars.
The longitudinal groove on the underside of the base plate enables alignment on the machine table.
The guides of the adjustable axes and the base plate are ground.
The removable hand crank is of course included in the scope of delivery.
This 360° rotating machine vice is particularly characterised by its quick-release mechanism. Vices with this technology are particularly suitable for series processing of workpieces of the same dimensions. The clamping range is preset via the spindle. The workpiece itself is clamped using the quick-clamping lever. Actuating the lever opens or closes the jaws by approx. 2 mm, enabling the workpieces to be changed quickly. The machining angle of +/- 90° can be set and read off using the angle scale on the turntable. The desired angle position is fixed using two nuts. The vice can be attached to a machine table using the slotted holes on the side.
The swivelling function of this machine vice makes it possible to process surfaces at a specific angle in relation to the clamping surface. The machining angle can be set and read off from 0 to 90° using the angle scale on the side. The desired angle position is fixed using a tommy screw. The vice has an adjustable stop screw for the zero position. The vice can be attached to a machine table using the four slotted holes.
Height of jaws: 35 mm
Max. Clamping range: 75 mm
Total height: 100 mm
The vice can be rotated 360° on the base plate, a scale is attached all the way round (1 graduation mark = 1°).
The guides on the vice can be adjusted using pressure bars.
The hand crank is of course included in the scope of delivery.
Height of jaws: 35 mm
Max. Clamping range: 75 mm
Total height: 130 mm
The vice can be rotated 360° on the base plate, a scale is attached all the way round (1 graduation mark = 1°).
The vertical adjustment range is up to 90°. A scale is also provided here.
The guides on the vice can be adjusted using pressure bars.
The hand crank is of course included in the scope of delivery.
Jaw height: 34 mm
Max. Clamping range: 76 mm
Total height: 105 mm
The vice can be rotated 360° on the base plate, a scale is attached all the way round (1 graduation mark = 1°).
The guides on the vice can be adjusted using pressure bars.
With longitudinal groove on the underside of the base plate for alignment on the machine table.
The hand crank is of course included in the scope of delivery.
This 360° rotating machine vice is particularly characterised by its quick-release mechanism. Vices with this technology are particularly suitable for series processing of workpieces of the same dimensions. The clamping range is preset via the spindle. The workpiece itself is clamped using the quick-clamping lever. Actuating the lever opens or closes the jaws by approx. 3 mm, enabling the workpieces to be changed quickly. The machining angle of +/- 90° can be set and read off using the angle scale on the turntable. The desired angle position is fixed using two nuts. The vice can be attached to a machine table using the slotted holes on the side.
Height of jaws: 33.5 mm
Max. Clamping range: 77 mm
Total height: 170 mmHeight to support: 130 mm
The vice can be rotated 360° on the base plate, a scale is attached all the way round (1 graduation mark = 1°).
The vertical adjustment range is up to 90°, the horizontal adjustment range is +/- 45°. A scale is also provided here.
The guides on the vice can be adjusted using pressure bars.
The longitudinal groove on the underside of the base plate enables alignment on the machine table.
The guides of the adjustable axes and the base plate are ground.
The removable hand crank is of course included in the scope of delivery.
Jaw height: 37 mm
Max. Clamping range: 102 mm
Total height: 195 mmHeight to support: 154 mm
The vice can be rotated 360° on the base plate, a scale is attached all the way round (1 graduation mark = 1°).
The vertical adjustment range is up to 90°, the horizontal adjustment range is +/- 45°. A scale is also provided here.
The guides on the vice can be adjusted using pressure bars.
The longitudinal groove on the underside of the base plate enables alignment on the machine table.
The guides of the adjustable axes and the base plate are ground.
The removable hand crank is of course included in the scope of delivery.
The swivelling function of this machine vice makes it possible to process surfaces at a specific angle in relation to the clamping surface. The machining angle can be set and read off from 0 to 90° using the angle scale on the side. The desired angle position is fixed using a tommy screw. The vice has an adjustable stop screw for the zero position. The vice can be attached to a machine table using the four slotted holes.
Height of jaws: 40 mm
Max. Clamping range: 104.5 mm
Total height: 125 mm
The vice can be rotated 360° on the base plate, a scale is attached all the way round (1 graduation mark = 1°).
The guides on the vice can be adjusted using pressure bars.
With longitudinal groove on the underside of the base plate for alignment on the machine table.
The hand crank is of course included in the scope of delivery.
Height of jaws: 37 mm
Max. Clamping range: 102 mm
Total height: 147 mmHeight to support: 101 mm
The vice can be rotated 360° on the base plate, a scale is attached all the way round (1 graduation mark = 1°).
The vertical adjustment range is up to 90°. A scale is also provided here.
The guides on the vice can be adjusted using pressure bars.
With longitudinal groove on the underside of the base plate for alignment on the machine table.
The hand crank is of course included in the scope of delivery.
This machine vice is made of solid cast steel. It has two movable clamping jaws, which always open and close simultaneously thanks to the two counter-rotating trapezoidal spindles. The steel jaws are ground and each has a horizontal and a vertical prism. The movable hand crank attached to the handle facilitates handling of the vice. Two slotted holes are provided on the side for mounting on a machine table.
€109.00*
Content: 1 pcs
€96.00*
Content: 1 pcs
€106.00*
Content: 1 pcs
€140.00*
Content: 1 pcs
€178.00*
Content: 1 pcs
€117.00*
Content: 1 pcs
€160.00*
Content: 1 pcs
€189.00*
Content: 1 pcs
€175.00*
Content: 1 pcs
€222.00*
Content: 1 pcs
€207.00*
Content: 1 pcs
€301.00*
Content: 1 pcs
€147.00*
Content: 1 pcs
€219.00*
Content: 1 pcs
€275.00*
Content: 1 pcs
€82.00*
Content: 1 pcs
19 July 2022 05:30
Produkt wie Beschrieben - Schnelle Lieferung -
Produkt wie Beschrieben - Schnelle Lieferung - Problemlos
24 November 2021 00:00
Good
good quality, low price, be careful a little small in this size
27 February 2021 00:00
Einwandfrei
Allerdings läßt sich die Kurbel, je nach Positierung des Schraubstocks auf dem Koordinatentisch, nicht ganz umdrehen. Sie muß immer wieder abgezogen und neu aufgesetzt werden, wenn man die Backen weit öffnen bzw. weit schließen will. Das sehe ich aber nicht als Konstruktionsfehler. Abhilfe ist möglich durch Aufsetzen einer Ratschen-Verlängerung, die über den Tisch hinausreicht. Der eingestellte Drehwinkel wird verändert mit Lockern und Wiederfestziehen zweier Muttern per 13mm-Schlüssel. Ideal wäre ein Stellrad wie bei einem Teilapparat. Aber für den Preis ist dieser Schraubstock eine gute Lösung.
3 August 2020 00:00
Kurbel etwas zu nahe am Schraubstock. Lässt sich aber mit einer Steckschlüsselverlängerung verlängern.
schnell geliefert, Ware top, immer wieder
20 May 2020 00:00
Maschinenschraubstock mit gutem Preis-Leistungs Verhältnis
Wertiger Schraubstock mit geschliffenen Backen, ideal für häufige Winkelverstellungen. Auch die Skala des Drehtellers ist relativ genau. Alles in allem ein guter Maschinenschraubstock.
8 February 2019 00:00
Morsa autocentrante da 50mm
Ottima morsa di buona costruzione e precisione,consigliata !
13 August 2018 00:00
Kleiner aber feiner Schraubstock
Sehr gute Verarbeitung, ein präziser und stabiler Schraubstock. Absolut empfehlenswert !