Lathe PM2700 with 400 volt motor and measuring system
€2,249.00*
% €2,455.00* (8.39% saved)Prices incl. 19% VAT. plus Shipping costs
Delivery time: 1-3 working days **
Less than 10 pieces available (online and in specialist shops)
Intended use
The PM2700 is a metal lathe for the high-end hobby sector. Due to its versatile application possibilities, this lathe is used in model making, in individual and small series production, in prototype construction and in repair and training workshops. The lathe is designed for machining steel, cast iron, all non-ferrous metals, aluminium, brass, etc., but can also be used for machining plastics or similar non-hazardous or dust-generating materials.
Technical data
| Bed width [mm]: | 135 |
|---|---|
| Centre distance [mm]: | 700 |
| Centre height [mm]: | 125 |
| Circulation Ø over cross slide [mm]: | 130 |
| Clamping range inner jaws [mm]: | 2,5 - 125 |
| Clamping range outer jaws [mm]: | 38 - 110 |
| Concentricity of lathe chuck [mm]: | max. 0.040 |
| Frequency [Hz]: | 50 |
| Gross weight [kg]: | 196 |
| Lateral adjustability of the tailstock [mm]: | ± 8 |
| Lathe chuck diameter [mm]: | 125 |
| Lead of top slide spindle [mm]: | 2 |
| Lead screw pitch [mm]: | 3 |
| Longitudinal feed [mm]: | 0,05 - 0,1 |
| Machine dimensions (L x W x H) [mm]: | 1,440 x 570 x 580 |
| Max. torsion bar height [mm]: | 12 |
| Motor power P1 [W]: | 1.380 |
| Motor power P2 [W]: | 750 |
| Net weight [kg]: | 165 |
| Number of longitudinal feeds: | 2 |
| Number of thread pitches (inch): | 20 |
| Number of thread pitches (metric): | 20 |
| Packaging dimensions (L x W x H) [mm]: | 1500 x 570 x 570 |
| Pitch face slide spindle [mm]: | 2 |
| Quadruple steel holder Mounting height [mm]: | 20 |
| Rotation Ø over machine bed [mm]: | 250 |
| Scale division on the bed slide handwheel [mm] / [in]: | 0,5 / 0,02 |
| Scale division on the cross slide handwheel [mm] / [in]: | 0,1 / 0,004 |
| Scale division on top slide handwheel [mm] / [in]: | 0,05 / 0,002 |
| Scale graduation on tailstock handwheel [mm] / [in]: | 0,025 / 0,001 |
| Spindle bore [mm]: | 27 |
| Spindle cone: | MK4 |
| Spindle holder: | cylindrical DIN 6350 |
| Spindle speed [rpm].: | 105 / 200 / 350 / 600 / 1.000 / 1.600 |
| Steps Spindle speed: | 6 |
| Tailstock cone: | MK2 |
| Tailstock quill stroke [mm]: | 60 |
| Thread pitch [Gg/"]: | 8 - 56/1 |
| Thread pitch [mm]: | 0,2 - 3,5 |
| Tool holder: | 4-fold |
| Top slide rotatable [°]: | ± 45 |
| Travelling distance of the cross slide [mm]: | 110 |
| Travel of the bed slide [mm]: | 590 |
| Travel of the top slide [mm]: | 75 |
| Voltage [V]: | 400 |
| WEEE reg. no.: | EN 95902713 |
High-quality 4-axis measuring system with LCD screen and 3 pre-mounted glass scales
Speed range 105 to 1,600 rpm.
Automatic longitudinal feed
Continuous, solid machine bed
Powerful 400 volt motor, this high-voltage device requires a higher mains voltage & is not equipped with a two-pole mains plug
Description of the
The PM2700 lathe is driven by a powerful 400 volt three-phase motor with an output power of 750 watts. Power is reliably transmitted via a double belt pulley with two drive belts. The working spindle gear, which runs in an oil bath, allows six different spindle speeds from 105 to 1,600 rpm, which can be set using two control levers. The Hobby lathe is equipped with an automatic longitudinal feed. To select the different feed speeds for turning and the different pitches for thread cutting, the required change gear combinations are used according to the change gear table. All required change gears are included in the scope of delivery. This model is a lead screw turning machine. To prevent the lead screw from travelling unnecessarily, it can be disengaged via a control lever. The lead screw is completely covered to prevent accidental intervention, and this protection also prevents falling metal chips from sticking. This prevents unnecessary wear and possible damage to the lock nut. The bed slide can be moved manually with the bed slide handwheel via the toothed rack or with a handwheel at the right-hand end of the bed via the lead screw. The guides on the cross and top slides can be adjusted without play using pressure bars. The cast machine bed, which extends over the entire length and ensures high stability and rigidity of the metal lathe, should be emphasised. The prism bed is induction-hardened and ground. The wide headstock and the resulting widely spaced adjustable tapered roller bearings of the spindle shaft ensure a greater support width. This in turn leads to high shaft stability. The ON/OFF switch, the switch for clockwise/anticlockwise rotation and the emergency stop button are located on the control box above the headstock.
The glass scale measuring system mounted on the lathe is characterised by very extensive functions and display options. Selected functions are shown graphically on the display with a diagonal of 18 cm / 7 inches for better understanding. The position display offers the option of choosing between turning, milling or grinding mode. The languages available are German, English, Spanish, French and Chinese.
The following functions are available in turning mode:
- Taper turning
- Tool compensation
- The traverse path in the X-axis can be displayed either in diameter or radius.
- It is possible to display Z and Z0 combined, i.e. the travel of the bed slide and the travel of the top slide are displayed as a total.
The following functions are available in the milling operating mode:
- Inclined contour / surface: Milling of phases or diagonal surfaces
- Setting any number of holes at an even distance on a straight line (SHL function)
- Milling a radius or circular arc
- Representation of a bolt hole circle for evenly spaced holes on a circular arc
- Determination of the centre point between two points
The values can be displayed in mm or inches in all operating modes. It is possible to change the sign when displaying the individual axes. A standby mode can be activated on the position display. The display brightness, date, time and acoustic signals can be set. A calculator function with memory is also available.
Please note: The specified travel distances may be reduced if the measuring bars are fitted.
Scope of delivery
- 1 x lathe PM2700
- 1 x operating instructions
- 1 x lathe chuck (3-jaw chuck, 125 mm)
- 1 x Set of external jaws
- 1 x chuck spanner
- 1 x set of change wheels
- 1 x set of open-end spanners
- 1 x splash guard
- 1 x chip tray
- 1 x glass scale 120 mm incl. cover
- 1 x glass scale 170 mm incl. cover
- 1 x glass scale 720 mm incl. cover
- 1 x position indicator with LCD screen incl. mains cable
- 1 x Holder for position indicator
- 1 x Operating instructions for measuring system
More about the brand and products fromÂ
The PM2700 lathe is driven by a powerful 400 volt three-phase motor with an output power of 750 watts. Power is reliably transmitted via a double belt pulley with two drive belts. The working spindle gear, which runs in an oil bath, allows six different spindle speeds from 105 to 1,600 rpm, which can be set using two control levers. The Hobby lathe is equipped with an automatic longitudinal feed. To select the different feed speeds for turning and the different pitches for thread cutting, the required change gear combinations are used according to the change gear table. All required change gears are included in the scope of delivery. This model is a lead screw turning machine. To prevent the lead screw from travelling unnecessarily, it can be disengaged via a control lever. The lead screw is completely covered to prevent accidental intervention, and this protection also prevents falling metal chips from sticking. This prevents unnecessary wear and possible damage to the lock nut. The bed slide can be moved manually with the bed slide handwheel via the toothed rack or with a handwheel at the right-hand end of the bed via the lead screw. The guides on the cross and top slides can be adjusted without play using pressure bars. The cast machine bed, which extends over the entire length and ensures high stability and rigidity of the metal lathe, should be emphasised. The prism bed is induction-hardened and ground. The wide headstock and the resulting widely spaced adjustable tapered roller bearings of the spindle shaft ensure a greater support width. This in turn leads to high shaft stability. The ON/OFF switch, the switch for clockwise/anticlockwise rotation and the emergency stop button are located on the control box above the headstock.
The glass scale measuring system mounted on the lathe is characterised by very extensive functions and display options. Selected functions are shown graphically on the display with a diagonal of 18 cm / 7 inches for better understanding. The position display offers the option of choosing between turning, milling or grinding mode. The languages available are German, English, Spanish, French and Chinese.
The following functions are available in turning mode:
- Taper turning
- Tool compensation
- The traverse path in the X-axis can be displayed either in diameter or radius.
- It is possible to display Z and Z0 combined, i.e. the travel of the bed slide and the travel of the top slide are displayed as a total.
The following functions are available in the milling operating mode:
- Inclined contour / surface: Milling of phases or diagonal surfaces
- Setting any number of holes at an even distance on a straight line (SHL function)
- Milling a radius or circular arc
- Representation of a bolt hole circle for evenly spaced holes on a circular arc
- Determination of the centre point between two points
The values can be displayed in mm or inches in all operating modes. It is possible to change the sign when displaying the individual axes. A standby mode can be activated on the position display. The display brightness, date, time and acoustic signals can be set. A calculator function with memory is also available.
Please note: The specified travel distances may be reduced if the measuring bars are fitted.
Despite its compact size, the PM2700 lathe offers a wide range of applications. The gear drive running in an oil bath allows six different spindle speeds from 105 to 1,600 rpm, which are switched with two levers. The Hobby lathe is equipped with an automatic longitudinal feed. To select the different feed speeds for turning and the different pitches for thread cutting, the required change gear combinations are used according to a table. All required change gears are included in the scope of delivery. The PM2700 is a lead screw turning machine. To prevent the lead screw from travelling unnecessarily, it can be disengaged via a control lever. The bed slide can be moved manually with the bed slide handwheel via the gear rack or with a handwheel at the right-hand end of the bed via the lead screw. The cast machine bed, which extends over the entire length and ensures high stability and rigidity of the metal lathe, should be emphasised. The prism bed is induction-hardened and ground. The wide headstock and the resulting widely spaced adjustable tapered roller bearings of the spindle shaft ensure a greater support width. This in turn leads to high shaft stability.
The PM2500 lathe is driven by a powerful 400 volt three-phase motor with an output power of 750 watts. Power is reliably transmitted via a double belt pulley with two drive belts. The working spindle gear, which runs in an oil bath, allows six different spindle speeds from 105 to 1,600 rpm, which can be set using two control levers. The Hobby lathe is equipped with an automatic longitudinal feed. To select the different feed speeds for turning and the different pitches for thread cutting, the required change gear combinations are used according to the change gear table. All required change gears are included in the scope of delivery. The PM2500 is a lead screw turning machine. To prevent the lead screw from travelling unnecessarily, it can be disengaged via a control lever. The lead screw is completely covered to prevent accidental intervention, and this protection also prevents falling metal chips from sticking. This prevents unnecessary wear and possible damage to the lock nut. The bed slide can be moved manually with the bed slide handwheel via the toothed rack or with a handwheel at the right-hand end of the bed via the lead screw. The guides on the cross and top slides can be adjusted without play using pressure bars. The cast machine bed, which extends over the entire length and ensures high stability and rigidity of the metal lathe, should be emphasised. The prism bed is induction-hardened and ground. The wide headstock and the resulting widely spaced adjustable tapered roller bearings of the spindle shaft ensure a greater support width. This in turn leads to high shaft stability. The ON/OFF switch, the switch for clockwise/anticlockwise rotation and the emergency stop button are located on the control box above the headstock.
The lathe PM2500 is driven by a powerful 400 volt three-phase motor with an output power of 750 watts. Power is reliably transmitted via a double belt pulley with two drive belts. The working spindle gear, which runs in an oil bath, allows six different spindle speeds from 105 to 1,600 rpm, which can be set using two control levers. The Hobby lathe is equipped with an automatic longitudinal feed. To select the different feed speeds for turning and the different pitches for thread cutting, the required change gear combinations are used according to the change gear table. All required change gears are included in the scope of delivery. This model is a lead screw turning machine. To prevent the lead screw from travelling unnecessarily, it can be disengaged via a control lever. The lead screw is completely covered to prevent accidental intervention, and this protection also prevents falling metal chips from sticking. This prevents unnecessary wear and possible damage to the lock nut. The bed slide can be moved manually with the bed slide handwheel via the toothed rack or with a handwheel at the right-hand end of the bed via the lead screw. The guides on the cross and top slides can be adjusted without play using pressure bars. The cast machine bed, which extends over the entire length and ensures high stability and rigidity of the metal lathe, should be emphasised. The prism bed is induction-hardened and ground. The wide headstock and the resulting widely spaced adjustable tapered roller bearings of the spindle shaft ensure a greater support width. This in turn leads to high shaft stability. The ON/OFF switch, the switch for clockwise/anticlockwise rotation and the emergency stop button are located on the control box above the headstock.
The glass scale measuring system mounted on the lathe is characterised by very extensive functions and display options. Selected functions are shown graphically on the display with a diagonal of 18 cm / 7 inches for better understanding. The position display offers the option of choosing between turning, milling or grinding mode. The languages available are German, English, Spanish, French and Chinese.
The following functions are available in turning mode:
- Taper turning
- Tool compensation
- The traverse path in the X-axis can be displayed either in diameter or radius.
- It is possible to display Z and Z0 combined, i.e. the travel of the bed slide and the travel of the top slide are displayed as a total.
The following functions are available in the milling operating mode:
- Inclined contour / surface: Milling of phases or diagonal surfaces
- Setting any number of holes at an even distance on a straight line (SHL function)
- Milling a radius or circular arc
- Representation of a bolt hole circle for evenly spaced holes on a circular arc
- Determination of the centre point between two points
The values can be displayed in mm or inches in all operating modes. It is possible to change the sign when displaying the individual axes. A standby mode can be activated on the position display. The display brightness, date, time and acoustic signals can be set. A calculator function with memory is also available.
Please note: The specified travel distances may be reduced if the measuring bars are fitted.
€2,249.00*
Content: 1 Piece
€1,679.00*
Content: 1 pcs
€1,649.00*
Content: 1 pcs
€2,299.00*
Content: 1 Piece
9 February 2025 19:32
Die Maschine ist recht gut, der Reitstock
Die Maschine ist recht gut, der Reitstock könnte besser sein. Die Mutter von der Pinole hat sich gelöst beim ausdrücken vom Bohrer. Passung schlecht. Die Maschine ist schlecht zu reinigen die Späne sind nur von hinten zu entfernen.
29 August 2024 17:33
Super Maschine jedoch Lieferumfang etwas Mager.
Die PM2700 ist wirklich eine super Maschine. Im Lieferumfang ist neben Zahnrändern zum wechseln zwei ausgiebige Anleitungen für Maschine und Bildschirm. Ich habe leider ein paar Kleinigkeiten für die Wartung der Maschine vermisst, daher ziehe ich einen Stern ab. Maschine Kam gut und sicher verpackt per Speditionsversand diese hatten die Maschine in 2 Tagen vor meiner Haustür ausgeliefert. Kann die Maschine jedem wärmstens empfehlen.
Sehr gute Drehmaschine. Was ich mir wünschen würde ist zum einen, unter der Gummiablage kein Aluminium sondern Metall, damit man das die Messskala mit magnetfuß befestigen kann. Zum anderen sollte die Skala für Gewindedrehen (Wechsel der ritzel) verständlicher aufgeführt wird. Ansonsten ist es eine sehr gute Maschine.
Ich habe diese Maschine jetzt ca. 5 Jahre im Einsatz und Sie macht was Sie machen soll. Sicher es ist kein Industriestandart aber Sie ist sehr gut und mit etwas Fachwissen erfüllt diese Maschine leicht die täglichen Aufgaben für gehobenen Hobbymaschinenbau etc. . Ich selbst Drehe sehr viele Passungen, deshalb habe ich diese Maschine auch mit einem DRO ausgestattet welches das arbeiten ungemein erleichtert. Die Pinolen sind für das Preisleistungsverhältnis sehr gut. Das Span Fix System arbeitet sehr gut und genau. Der Reitstock könnte etwas Größer ausfallen für tiefe Bohrungen, aber wie gesagt wenn man Tricksen kann geht das auch. Die Getriebe - Abstufung könnte etwas besser ausfallen, da fehlen mir als noch mal ein zwei drei Drehzahlen, aber es läuft auch ohne. zum Abschluss muss man sagen das die Maschine ihr Geld wert ist und man damit nichts falsch macht. Einfach Empfehlenswert.
24 February 2023 08:08
Tolle Maschine. Einfach auspacken und freuen :-)
Ich bin absolut zufrieden. Für den Preis einfach super. Vorher hatte ich (laut Eckdaten) eine sehr ähnliche Maschine für etwa 2/3 des Preises. Diese hier ist mindestens doppelt so gut. Sehr stabild und masiv. Sogar der Elektrokasten sieht von innen sehr sauber und ordentlich aus. Einfach auspacken und man kann die ersten Teile drehen. Das kenne ich so sonst nicht. Ich bin auf jeden Fall sehr zufrieden. Nur der Schlüssel für das 3-Backenfutter war zu lang. Aber das lässt sich ja leicht ändern ;-)
Hab ja länger mit der Bewertung gewartet, weil ich erst ne Weile mit drehen wollte. Ich selber arbeite sei 40 Jahren im Zerspanungsbereich mit deutlich größeren Maschinen... Das positive zuerst: Sauber ausgerichtet dreht die auf 200 mit 0,01mm genau. Durch das Getreibe geht auch locker ein 16mm Bohrer in Stahl ohne vorbohren. Futter hat bei meiner unter 0,02mm Rundlaufabweichung, der Spindelflansch unter 5mµ Handrad fürn Querschlitten ist mit Axiallagern und läuft auch bei nem stramm eingestellten Schlitten geschmeidig. Der Reitstock war ab Werk gut ausgerichtet und die Klemmung mit Hebel hat auch kaum eine Maschine der Preisklasse Elektrik und Schütze sind Siemens, sauber verbaut Was mir negativ aufgefallen ist: Die Wechselräder gehen nur mit Hammer drauf und mit Abzieher ab, da die wie die Wellen auf denen die laufen nicht entratet sind, geht aber mit etwas Nacharbeit auch geschmeidig. Die Riemenscheibe auf dem Motor hat ca. 0,14mm Spiel, die Klemmschraube drückt nicht auf den Keil sondern 180° versetzt, was zur Folge hat der Keil fliegt ständig raus und der Antrieb rappelt. Hab den erst mal verklebt, da ich möglicherweise auf einen anderen Motor und Rippenriemen umrüste. Der Querschlitten ist nicht wirklich geschabt sondern mit viel zu grobem Rumgefuckel verhunzt an den Laufflächen, eh wer schabt schon und macht dabei 0,1mm tiefe Furchen? Abstechen von Stahl ging aus der Box kaum brauchbar, weil der kleine Oberschlitten konstruktionsbedingt halt instabil ist, auch festgeklemmt. Hab den durch nen Solid Tool Post ersetzt ( nen Klotz Gusseisen an vier Ecken verschraubt ) Kegel drehen ist dann nicht mehr, aber abstechen geht auch bei 42CrMoV4 easy und fix ohne rappeln. Lässt sich aber in 5min wieder gegen den Oberschlitten tauschen. Spindelbohrung ist nicht wie angegeben 27mm, ne 26er Welle geht durch, ne 27er Welle bleibt mittig stecken, aber eh schon mehr als sonst in der Preisklasse... Jedenfalls bin ich happy mit dem Maschinchen und mit nem bissl Nacharbeit kann die auch nicht weniger als ne Weiler mit 125er Futter zum Bruchteil des Preises ;) Hab die mit Multifix A Clone gekauft, den man unbedingt verstiften sollte, falls man rändelt oder mit dem Halter bohrt..
Kompaktes Teil. Macht alles, was wir machen wollen und so, wie es sein muss.
Endlich ich habe meine eigene Drehmaschine. Und ich bin glücklich ein tolles Gerät für den Preis! Die Maschine ist gut verarbeitet, lediglich der Keilriemen war etwas lose. Aber kein Problem. Ich denke diese Maschine wird mich noch lange begleiten. Ich wurde auch gut beraten und kann diese Maschine nur wärmstens empfehlen. Ich denke für den Preis bekommt man nichts besseres.
Für's Geld bekommt man eine gute Maschine. Die Lieferung der Maschine erfolgte durch DHL auf einer EUR-Palette, gut gesichert. Die Maschine war in einer Kiste verpackt und leicht zu öffnen. Lieferumfang wie beschrieben und alles in absolutem ordnugsgemäßem Neu-Zustand - so muß es sein! Maschine läuft einwandfrei zu meiner vollen Zufriedenheit. Preis Leistung ist TOP! Besten Dank, gerne wieder!
Preis Leistung passt. 2 kleine Nachteile sind das man leider am Bettschlitten und Reitstock die Scala nicht Nullen kann.
Shopping basket
