Mounting flange for ER32 collets Ø 80 mm
€46.00*
Prices incl. 19% VAT. plus Shipping costs
Delivery time: 1-3 working days **
More than 10 pieces available (online and in specialist shops)
Intended use
With a mounting flange for collets, these can also be used on a lathe. In contrast to clamping with three-jaw or four-jaw chucks, clamping with collets ensures that the material is clamped cleanly and gently, and pressure marks are avoided, especially on softer workpieces. As a rule, collet systems have a higher concentricity compared to lathe chucks.
Technical data
| Concentricity deviation max. [mm]: | 0.025 (10 mm) / 0.04 (50 mm) |
|---|---|
| Cylindrical internal fit [mm]: | 55 |
| Diffuser [mm]: | 24 |
| Drill holes: | 3 x M6 |
| Max. revolutions [rpm].: | 1.400 |
| Outer diameter Ø [mm]: | 80 |
| Pitch circle [mm]: | 66 |
| Recording: | Cylindrical holder |
| Total height (incl. union nut) [mm]: | 50 |
| Material: | Steel, hardened and ground |
Made of steel, hardened and ground
For holding ER32 collets
For clean and gentle clamping, even of smaller diameters
Concentricity deviation max.: 0.025 mm for 10 mm overhung / 0.04 mm for 50 mm overhung
Description of the
This mounting flange for ER32 collets is made of hardened steel, the surfaces are ground. The flange can be mounted on lathes with an 80 mm cylindrical holder instead of a lathe chuck. The clearance is 24 mm.
Procedure for inserting ER collets:
1. insert the groove of the collet at an angle into the eccentric ring of the union nut until it audibly engages.
2 Screw the union nut with the inserted collet chuck into the mounting flange.
Scope of delivery
- 1 x mounting flange for ER32 collets Ø 80 mm
- 1 x hook spanner for ER32
More about the brand and products from
This mounting flange for ER32 collets is made of hardened steel, the surfaces are ground. The flange can be mounted on lathes with an 80 mm cylindrical holder instead of a lathe chuck. The clearance is 24 mm.
Procedure for inserting ER collets:
1. insert the groove of the collet at an angle into the eccentric ring of the union nut until it audibly engages.
2 Screw the union nut with the inserted collet chuck into the mounting flange.
This mounting flange for ER32 collets is made of hardened steel, the surfaces are ground. The flange can be mounted on lathes with a 100 mm cylindrical holder instead of a lathe chuck. The clearance is 24 mm.
Procedure for inserting ER collets:
- Insert the groove of the collet at an angle into the eccentric ring of the union nut until it audibly engages.
- Screw the union nut with the inserted collet into the mounting flange.
This mounting flange for ER32 collets is made of hardened steel, the surfaces are ground. The flange can be mounted on lathes with a 125 mm cylindrical holder instead of a lathe chuck. The clearance is 24 mm.
Procedure for inserting ER collets:
- Insert the groove of the collet at an angle into the eccentric ring of the union nut until it audibly engages.
- Screw the union nut with the inserted collet into the mounting flange.
This mounting flange for ER32 collets is made of hardened steel, the surfaces are ground. The flange can be mounted on lathes with a 160 mm holder with a cylindrical holder instead of a lathe chuck. The clearance is 24 mm.
Procedure for inserting ER collets:
- Insert the groove of the collet at an angle into the eccentric ring of the union nut until it audibly engages.
- Screw the union nut with the inserted collet into the mounting flange.
This mounting flange for ER32 collets is made of hardened steel, the surfaces are ground. The flange can be mounted on lathes with a 200 mm cylindrical holder instead of a lathe chuck. The clearance is 24 mm.
Procedure for inserting ER collets:
- 1. insert the groove of the collet at an angle into the eccentric ring of the union nut until it audibly engages.
- 2 Screw the union nut with the inserted collet chuck into the mounting flange.
€46.00*
Content: 1 pcs
€46.50*
Content: 1 pcs
€47.00*
Content: 1 pcs
€73.50*
Content: 1 pcs
€123.50*
Content: 1 pcs
6 November 2023 15:15
Perfekt
Wurde leider mit schlechtem Rundlauf ausgeliefert, aber anstandslos umgetauscht. Jetzt ist alles perfekt.
1 February 2023 09:53
Sehr gute Verarbeitung. Preis Leistungsverhältnis o.k.
Sehr gute Verarbeitung. Preis Leistungsverhältnis o.k.
27 October 2022 08:12
Die Verarbeitung und die Funktion aller Teile
Die Verarbeitung und die Funktion aller Teile ist gut.
17 March 2022 18:28
noch nicht ausprobiert-sieht aber einwandfrei aus
noch nicht ausprobiert-sieht aber einwandfrei aus
30 January 2022 00:00
Alles bestens
Ich bin mit Paulimot sehr zufrieden und werde auch weiterhin bei Paulimot einkaufen. Mit freundlichen Grüßen Trautwin Maurer.
26 January 2022 00:00
Beratung
Top Beratung
14 January 2022 00:00
Sehr zu empfehlen
Wie immer bei Paulimot. Passt genau, läuft genau super Qualität. Was willst Du mehr! Vielen herzlichen Dank. Gerne wieder.
13 January 2022 00:00
Nicht Schlecht aber,
Es wäre noch gut wenn man nicht nur eine Möglichkeit hat die Spannzange festzuhalten sonder auch das Futter. Wie Spannt man das Ganze? Seitlich eine Bohrung wäre ganz gut, Ist zwar auf der Konstruktionszeichnung jedoch nicht am Originalteil.
6 July 2021 00:00
Flansch für ER-Spannzangen
Ich bin mit der Bestell-Abwicklung, der Lieferzeit, und dem gelieferten Produkt sehr zufrieden!
29 March 2021 00:00
Sitzt, passt, wackelt nicht!
Mit einer kleinen Modifikation wird diese Spannzangen Flansch an meinem Teilapparat gute Dienste verrichten. Passt prima!