Drilling machine vice 120 mm jaw width
€72.50*
Prices incl. 19% VAT. plus Shipping costs
Delivery time: 1-3 working days **
Less than 10 pieces available (online and in specialist shops)
Intended use
A drilling machine vice is used to clamp workpieces professionally so that drilling work can be carried out safely on machine tools (e.g. drilling machines or drilling/milling machines).
Technical data
| Baking material: | Steel |
|---|---|
| Base area [mm]: | 225 x 180 |
| Base body material: | Cast steel |
| Jaw height [mm]: | 30 |
| Jaw width [mm]: | 120 |
| Net weight [kg]: | 5,9 |
| Span (max.) [mm]: | 116 |
| Total height [mm]: | 63 |
120 mm jaw width, 116 mm maximum clamping width
Very good clamping options thanks to a total of six slotted holes
Spindle runs inside the handle
Fixed jaw with vertical and horizontal prisms for clamping cylindrical workpieces
Milled shoulder in clamping jaws for flat workpieces
Description of the
This drill press vice is sturdily made. The guidance of the movable jaw should be emphasised. The handle is designed as a sleeve spindle, i.e. the spindle for the movable jaw runs protected inside the handle. The overall length including the handle does not change when the movable jaw is unscrewed. A cross hole is provided at the end of the handle. A shaft with the appropriate diameter can be inserted into this cross hole, which can then be used as a lever to increase the clamping force.
As the vice is made of solid cast steel, it has a comparatively high dead weight, which increases stability during the drilling process. The jaws, one of which has horizontal and vertical prisms, are made of steel and ground. The vice can be attached to a machine table using the four elongated holes on the side.
Scope of delivery
- 1 x Drilling machine vice 120 mm jaw width
More about the brand and products from
This drill press vice is sturdily made. The guidance of the movable jaw should be emphasised. The handle is designed as a sleeve spindle, i.e. the spindle for the movable jaw runs protected inside the handle. The overall length including the handle does not change when the movable jaw is unscrewed. A cross hole is provided at the end of the handle. A shaft with the appropriate diameter can be inserted into this cross hole, which can then be used as a lever to increase the clamping force.
As the vice is made of solid cast steel, it has a comparatively high dead weight, which increases stability during the drilling process. The jaws, one of which has horizontal and vertical prisms, are made of steel and ground. The vice can be attached to a machine table using the four elongated holes on the side.
This drilling machine vice made of aluminium is characterised in particular by the possibility of quick adjustment. The spindle can be disengaged using a push button with return spring so that the movable jaw can be quickly and continuously preset over the entire clamping range. A punched length scale on the contact surfaces of the jaw facilitates this presetting. Once the desired position has been reached, the spindle is re-engaged by releasing the push button. In this position, the movable jaw can be moved as usual using the handle. The handle is designed as a hexagonal shaft, which ensures a good grip.
As the vice is made of aluminium, it is suitable for small or light drilling work. The vice can be attached to a machine table using the elongated holes on the side.
This drill press vice is sturdily made. The guidance of the movable jaw should be emphasised. This is designed to prevent the jaw from tilting when clamping on one side. Secondly, the handle is designed as a sleeve spindle, i.e. the spindle for the movable jaw runs protected inside the handle. The overall length including the handle does not change when the movable jaw is unscrewed. A cross hole is provided at the end of the handle. A shaft with the appropriate diameter can be inserted into this cross hole, which can then be used as a lever to increase the clamping force.
As the vice is made of solid cast steel, it has a comparatively high dead weight, which increases stability during the drilling process. The jaws, one of which has horizontal and vertical prisms, are made of steel and ground. The vice can be attached to a machine table using the three elongated holes on the side. This vice is particularly characterised by its two additional, ground support surfaces. This extends its range of applications.
This solidly manufactured cast steel vice has a base measuring 135 x 100 mm and can be firmly screwed to a workbench or the work table of drilling machines using two slotted holes. The top of the vice is ground on a surface measuring 80 x 80 mm. Four rotating pins allow cylindrical workpieces with diameters of 75 to 150 mm to be clamped. The prisms milled into the jaws allow shafts or other cylindrical workpieces with diameters of 4 to 20 mm to be clamped both horizontally and vertically. The anvil and the vice jaws are hardened.
This drill press vice is sturdily made. The guidance of the movable jaw should be emphasised. This is designed to prevent the jaw from tilting when clamping on one side. Secondly, the handle is designed as a sleeve spindle, i.e. the spindle for the movable jaw runs protected inside the handle. The overall length including the handle does not change when the movable jaw is unscrewed. A cross hole is provided at the end of the handle. A shaft with the appropriate diameter can be inserted into this cross hole, which can then be used as a lever to increase the clamping force.
As the vice is made of solid cast steel, it has a comparatively high dead weight, which increases stability during the drilling process. The jaws, one of which has horizontal and vertical prisms, are made of steel and ground. The vice can be attached to a machine table using the three elongated holes on the side.
This drill press vice is solidly made, i.e. both the support and guide surfaces of the movable jaw are wide. The vice is made of solid cast steel, which results in a comparatively high dead weight. This increases the stability of the vice during the drilling process. The jaws, one of which has a horizontal and one vertical prism, are made of steel and ground. The movable hand crank attached to the handle facilitates handling of the vice. Two slotted holes are provided on the side for mounting on a machine table.
This drill press vice is solidly made, i.e. both the support and guide surfaces of the movable jaw are wide. The vice is made of solid cast steel, which results in a comparatively high dead weight. This increases the stability of the vice during the drilling process. The jaws, one of which has a horizontal and one vertical prism, are made of steel and ground. The movable hand crank attached to the handle facilitates handling of the vice. Two slotted holes are provided on the side for mounting on a machine table.
€72.50*
Content: 1 Piece
€8.50*
Content: 1 Piece
€42.50*
Content: 1 pcs
€44.50*
Content: 1 pcs
€39.50*
Content: 1 pcs
€46.90*
Content: 1 pcs
€66.50*
Content: 1 pcs
30 December 2023 13:37
Der Maschinen- oder Bohrschraubstock besticht schon durch
Der Maschinen- oder Bohrschraubstock besticht schon durch seine optische Wertigkeit. Besonders auffallend ist der leichte Lauf der Verstellspindel. Die Spannung eines Werkstücks, ob in runder oder rechteckiger Form ist sicher und fest. Ich kann den Schraubstock guten Gewissens zum Kauf empfehlen.
8 August 2023 19:41
SEHR GUTE QUALITÄT
BIN SELBER MECHANIKER UND MUß SAGEN DIESER SCHRAUBSTOCK IST SEHR HOCHWERTIG UND DAß ZU EINEM SUPER PREIS.DA KANN MAN NICHT MECKERN. VOLLE PUNKTZAHL 👍👍👍👍
31 July 2023 19:35
Super Qualität !
Qualität ist, wie auch die 100mm Variante, die ich auch noch habe, hervorragend .
21 March 2023 10:03
Bohrmaschinen Schraubstock 120 mm
Ich bin mit dem Bohrmaschinen Schraubstock bis jetzt sehr zufrieden, kaum Spiel, exakt parallel, macht einen sehr guten Eindruck in Relation zum Preis.
31 January 2023 08:40
Gutes Produkt. Preisleistung ist großartig. Läuft gut,
Gutes Produkt. Preisleistung ist großartig. Läuft gut, spannt die Teile gut, recht präzise und auch optisch sauber gearbeitete Oberflächen.
24 November 2022 12:57
alles bestens
alles bestens, gerne wieder
28 August 2022 17:48
Zu empfehlen
Kam gut gefettet an . Er ist massiv und gut verarbeitet . Preis Leistung gut .
16 April 2022 05:41
bohrmaschinenschraubstock
alles bestens,gerne wieder...
6 September 2021 00:00
Tut was er soll
Ist ein guter Bohrmaschinen Schraubstock
21 July 2021 00:00
Robust und gute Verarbeitung
Präzise gearbeitete Backen, die parallel schließen, geschliffene Gleitfläche, robuste, schwere Ausführung. Deutlich besser verarbeitet als viele andere Maschinenschraubstöcke. Preis/Leistung sehr gut. Für meinen Wabeco Schraubstock wäre allerdings der Schraubstock mit 100mm Backenbreite ausreichend.