Machine vice 75 mm jaw width 360° rotatable
€160.00*
% €166.00* (3.61% saved)Prices incl. 19% VAT. plus Shipping costs
Delivery time: 1-3 working days **
Less than 10 pieces available (online and in specialist shops)
Description of the
Height of jaws: 35 mm
Max. Clamping range: 75 mm
Total height: 100 mm
The vice can be rotated 360° on the base plate, a scale is attached all the way round (1 graduation mark = 1°).
The guides on the vice can be adjusted using pressure bars.
The hand crank is of course included in the scope of delivery.
More about the brand and products from
Height of jaws: 35 mm
Max. Clamping range: 75 mm
Total height: 100 mm
The vice can be rotated 360° on the base plate, a scale is attached all the way round (1 graduation mark = 1°).
The guides on the vice can be adjusted using pressure bars.
The hand crank is of course included in the scope of delivery.
Height of jaws: 25 mm
Max. Clamping range: 50 mm
Total height: 75 mm
The vice can be rotated 360° on the base plate, a scale is attached all the way round (1 graduation mark = 1°).
The guides on the vice can be adjusted using pressure bars.
With longitudinal groove on the underside of the base plate for alignment on the machine table.
The hand crank is of course included in the scope of delivery.
Height of jaws: 25 mm
Max. Clamping range: 55 mm
Total height: 88 mm
The vice can be rotated 360° on the base plate, a scale is attached all the way round (1 graduation mark = 1°).
The guides on the vice can be adjusted using pressure bars.
With longitudinal groove on the underside of the base plate for alignment on the machine table.
The hand crank is of course included in the scope of delivery.
Height of jaws: 25 mm
Max. Clamping range: 50 mm
Total height: 95 mm
The vice can be rotated 360° on the base plate, a scale is attached all the way round (1 graduation mark = 1°).
The vertical adjustment range is up to 90°. A scale is also provided here.
The guides on the vice can be adjusted using pressure bars.
The hand crank is of course included in the scope of delivery.
Jaw height: 24 mm
Max. Clamping range: 53 mm
Total height: 120 mmHeight to support: 95 mm
The vice can be rotated 360° on the base plate, a scale is attached all the way round (1 graduation mark = 1°).
The vertical adjustment range is up to 90°, the horizontal adjustment range is +/- 45°. A scale is also provided here.
The guides on the vice can be adjusted using pressure bars.
The longitudinal groove on the underside of the base plate enables alignment on the machine table.
The guides of the adjustable axes and the base plate are ground.
The removable hand crank is of course included in the scope of delivery.
This 360° rotating machine vice is particularly characterised by its quick-release mechanism. Vices with this technology are particularly suitable for series processing of workpieces of the same dimensions. The clamping range is preset via the spindle. The workpiece itself is clamped using the quick-clamping lever. Actuating the lever opens or closes the jaws by approx. 2 mm, enabling the workpieces to be changed quickly. The machining angle of +/- 90° can be set and read off using the angle scale on the turntable. The desired angle position is fixed using two nuts. The vice can be attached to a machine table using the slotted holes on the side.
The swivelling function of this machine vice makes it possible to process surfaces at a specific angle in relation to the clamping surface. The machining angle can be set and read off from 0 to 90° using the angle scale on the side. The desired angle position is fixed using a tommy screw. The vice has an adjustable stop screw for the zero position. The vice can be attached to a machine table using the four slotted holes.
Height of jaws: 35 mm
Max. Clamping range: 75 mm
Total height: 130 mm
The vice can be rotated 360° on the base plate, a scale is attached all the way round (1 graduation mark = 1°).
The vertical adjustment range is up to 90°. A scale is also provided here.
The guides on the vice can be adjusted using pressure bars.
The hand crank is of course included in the scope of delivery.
Jaw height: 34 mm
Max. Clamping range: 76 mm
Total height: 105 mm
The vice can be rotated 360° on the base plate, a scale is attached all the way round (1 graduation mark = 1°).
The guides on the vice can be adjusted using pressure bars.
With longitudinal groove on the underside of the base plate for alignment on the machine table.
The hand crank is of course included in the scope of delivery.
This 360° rotating machine vice is particularly characterised by its quick-release mechanism. Vices with this technology are particularly suitable for series processing of workpieces of the same dimensions. The clamping range is preset via the spindle. The workpiece itself is clamped using the quick-clamping lever. Actuating the lever opens or closes the jaws by approx. 3 mm, enabling the workpieces to be changed quickly. The machining angle of +/- 90° can be set and read off using the angle scale on the turntable. The desired angle position is fixed using two nuts. The vice can be attached to a machine table using the slotted holes on the side.
Height of jaws: 33.5 mm
Max. Clamping range: 77 mm
Total height: 170 mmHeight to support: 130 mm
The vice can be rotated 360° on the base plate, a scale is attached all the way round (1 graduation mark = 1°).
The vertical adjustment range is up to 90°, the horizontal adjustment range is +/- 45°. A scale is also provided here.
The guides on the vice can be adjusted using pressure bars.
The longitudinal groove on the underside of the base plate enables alignment on the machine table.
The guides of the adjustable axes and the base plate are ground.
The removable hand crank is of course included in the scope of delivery.
Jaw height: 37 mm
Max. Clamping range: 102 mm
Total height: 195 mmHeight to support: 154 mm
The vice can be rotated 360° on the base plate, a scale is attached all the way round (1 graduation mark = 1°).
The vertical adjustment range is up to 90°, the horizontal adjustment range is +/- 45°. A scale is also provided here.
The guides on the vice can be adjusted using pressure bars.
The longitudinal groove on the underside of the base plate enables alignment on the machine table.
The guides of the adjustable axes and the base plate are ground.
The removable hand crank is of course included in the scope of delivery.
The swivelling function of this machine vice makes it possible to process surfaces at a specific angle in relation to the clamping surface. The machining angle can be set and read off from 0 to 90° using the angle scale on the side. The desired angle position is fixed using a tommy screw. The vice has an adjustable stop screw for the zero position. The vice can be attached to a machine table using the four slotted holes.
Height of jaws: 40 mm
Max. Clamping range: 104.5 mm
Total height: 125 mm
The vice can be rotated 360° on the base plate, a scale is attached all the way round (1 graduation mark = 1°).
The guides on the vice can be adjusted using pressure bars.
With longitudinal groove on the underside of the base plate for alignment on the machine table.
The hand crank is of course included in the scope of delivery.
Height of jaws: 37 mm
Max. Clamping range: 102 mm
Total height: 147 mmHeight to support: 101 mm
The vice can be rotated 360° on the base plate, a scale is attached all the way round (1 graduation mark = 1°).
The vertical adjustment range is up to 90°. A scale is also provided here.
The guides on the vice can be adjusted using pressure bars.
With longitudinal groove on the underside of the base plate for alignment on the machine table.
The hand crank is of course included in the scope of delivery.
€160.00*
Content: 1 pcs
€96.00*
Content: 1 pcs
€109.00*
Content: 1 pcs
€106.00*
Content: 1 pcs
€140.00*
Content: 1 pcs
€178.00*
Content: 1 pcs
€117.00*
Content: 1 pcs
€189.00*
Content: 1 pcs
€175.00*
Content: 1 pcs
€222.00*
Content: 1 pcs
€207.00*
Content: 1 pcs
€301.00*
Content: 1 pcs
€147.00*
Content: 1 pcs
€219.00*
Content: 1 pcs
€275.00*
Content: 1 pcs
27 August 2024 14:46
Sehr guter Schraubstock
Der Schraubstock ist sehr gut verarbeitet! Ich hätte mit eine bessere Markierung für die Gradzahl gewünscht und einen Nutenstein. Passt aber da ich mir das alles auch selbst machen kann. Sehr gute Qualität daher von mir eine absolute Empfehlung!!
4 August 2023 08:59
gut verarbeitetes Schraubstöckchen
Sehr schön parelleler Schraubstock zu einem akzeptablen Preis . Im Unterteil ist eine Nut nur leider fehlen die Nutensteine .Dann könnte man den Schraubstock einfach in der Nut aufspannen und er währe ausgerichtet.
20 September 2022 10:23
Preis Leistung stimmt.
Preis Leistung stimmt.
1 February 2021 00:00
excellent
Fast shipping, quality, parallel, strong jaws and fluid movement. Thank you Paulimot !
9 December 2020 00:00
Ausreichend für Hobby
Schraubstock reicht für den Hobbybereich aus.
19 October 2020 00:00
HS
Super Schraubstock spannt super und die Verstbeitung ist gut. Erste Frästeile angefertigt und mit Parallelunterlagen gespannt super Ergebnis. Immer wieder.
28 September 2020 00:00
Gut zu gebrauchen auf Fräsemaschine OPTIMUM
Alle Artikel, die ich bei Paulimot - es sind derzeit deren sechs - entsprechen meinen Vorstellungen. Betrachten Sie mich weiterhin als Stammkunde. Mit freundlichen Grüssen Marcel Dübendorfer
12 December 2017 00:00
Massiver Maschinenschraubstock
Schliesst sehr genau und spannt wie er sollte. Führungen sind nachstellbar. Für diesen Preis top!
11 April 2016 00:00
Qualität ist gut,Preis ist gut - da kann man nicht meckern
17 March 2016 00:00
Macht einen guten Eindruck, habe die Gradverstellung noch nicht getestet. Schnell geliefert. Danke für die Tasche