Boring bar with cutting insert 6 mm S06H-SCLCR06
€18.00*
% €19.00* (5.26% saved)Prices incl. 19% VAT. plus Shipping costs
Delivery time: 1-3 working days **
More than 10 pieces available (online and in specialist shops)
Intended use
Turning tools with replaceable inserts are characterised by the fact that worn cutting edges can be replaced quickly and easily. The tedious and time-consuming regrinding of the cutting edge is no longer necessary. Another advantage of turning tools with reversible or replaceable inserts is that the most suitable insert can be mounted on the holder depending on the material to be machined. For example, there are special inserts for machining aluminium or non-ferrous metals. Both the holders and the inserts are standardised and can be identified by the respective standard designation.
Technical data
| Areas of application: | Internal boring |
|---|---|
| Bore Ø min. [mm]: | 13 |
| Cutting plate: | CCMT060204 |
| Execution: | right |
| Shank Ø [mm]: | 6 |
| Standard designation: | S06H-SCLCR06 |
| Surface: | burnished |
| Total length [mm]: | 101 |
Right-hand internal turning tool
Cutting inserts available for special applications
Replacement inserts available individually or in a set of 10
Incl. Torx spanner for quickly changing the insert
Description of the
This boring bar with the standard designation S06H-SCLCR06 has a shank with a diameter of 6 mm and an overall length of 101 mm. The insert is made of sintered carbide. In contrast to HSS bits, the high temperature resistance of carbide allows higher cutting speeds. In addition, this insert is titanium nitride-coated, which contributes to greater heat resistance and a longer service life. TiN-coated inserts are intended for universal use. This means that soft materials can be machined just as well as hard materials.
For special applications, this carbide insert can be replaced by another insert that is suitable for the material to be machined. You can find these special indexable inserts in our range. You can also order the standard inserts from us individually or as a set of 10.
Note: In order to be able to clamp a boring bar with a round clamping shank in a chisel or steel holder with a flat contact surface, a so-called boring bar holder with a corresponding internal diameter is required.
Scope of delivery
- 1 x boring bar S06H-SCLCR06
- 1 x Torx spanner T8
More about the brand and products from
This boring bar with the standard designation S06H-SCLCR06 has a shank with a diameter of 6 mm and an overall length of 101 mm. The insert is made of sintered carbide. In contrast to HSS bits, the high temperature resistance of carbide allows higher cutting speeds. In addition, this insert is titanium nitride-coated, which contributes to greater heat resistance and a longer service life. TiN-coated inserts are intended for universal use. This means that soft materials can be machined just as well as hard materials.
For special applications, this carbide insert can be replaced by another insert that is suitable for the material to be machined. You can find these special indexable inserts in our range. You can also order the standard inserts from us individually or as a set of 10.
Note: In order to be able to clamp a boring bar with a round clamping shank in a chisel or steel holder with a flat contact surface, a so-called boring bar holder with a corresponding internal diameter is required.
This boring bar with the standard designation S08H-SCLCR06 has a shank with a diameter of 8 mm and an overall length of 100 mm. The cutting insert is made of sintered carbide. In contrast to HSS bits, the high temperature resistance of carbide allows higher cutting speeds. In addition, this insert is titanium nitride-coated, which contributes to greater heat resistance and a longer service life. TiN-coated inserts are intended for universal use. This means that soft materials can be machined in the same way as hard materials.
For special applications, this carbide insert can be replaced by another insert that is suitable for the material to be machined. You can find these special indexable inserts in our range. You can also order the standard inserts from us individually or as a set of 10.
Note: In order to be able to clamp a boring bar with a round clamping shank in a chisel or steel holder with a flat contact surface, a so-called boring bar holder with a corresponding internal diameter is required.
This boring bar with the standard designation S10K-SCLCR06 has a shank with a diameter of 10 mm and an overall length of 126 mm. The cutting insert is made of sintered carbide. In contrast to HSS bits, the high temperature resistance of carbide allows higher cutting speeds. In addition, this insert is titanium nitride-coated, which contributes to greater heat resistance and a longer service life. TiN-coated inserts are intended for universal use. This means that soft materials can be machined just as well as hard materials.
For special applications, this carbide insert can be replaced by another insert that is suitable for the material to be machined. You can find these special indexable inserts in our range. You can also order the standard inserts from us individually or as a set of 10.
Note: In order to be able to clamp a boring bar with a round clamping shank in a chisel or steel holder with a flat contact surface, a so-called boring bar holder with a corresponding internal diameter is required.
This boring bar with the standard designation S12M-SCLCR06 has a shank with a diameter of 12 mm and an overall length of 151 mm. The cutting insert is made of sintered carbide. In contrast to HSS bits, the high temperature resistance of carbide allows higher cutting speeds. In addition, this insert is titanium nitride-coated, which contributes to greater heat resistance and a longer service life. TiN-coated inserts are intended for universal use. This means that soft materials can be machined just as well as hard materials.
For special applications, this carbide insert can be replaced by another insert that is suitable for the material to be machined. You can find these special indexable inserts in our range. You can also order the standard inserts from us individually or as a set of 10.
Note: In order to be able to clamp a boring bar with a round clamping shank in a chisel or steel holder with a flat contact surface, a so-called boring bar holder with a corresponding internal diameter is required.
This boring bar with the standard designation S16R-SCLCR09 has a shank with a diameter of 16 mm and an overall length of 200 mm. The cutting insert is made of sintered carbide. In contrast to HSS bits, the high temperature resistance of carbide allows higher cutting speeds. In addition, this insert is titanium nitride-coated, which contributes to greater heat resistance and a longer service life. TiN-coated inserts are intended for universal use. This means that soft materials can be machined just as well as hard materials.
For special applications, this carbide insert can be replaced by another insert that is suitable for the material to be machined. You can find these special indexable inserts in our range. You can also order the standard inserts from us individually or as a set of 10.
Note: In order to be able to clamp a boring bar with a round clamping shank in a chisel or steel holder with a flat contact surface, a so-called boring bar holder with a corresponding internal diameter is required.
€18.00*
Content: 1 pcs
€18.50*
Content: 1 pcs
€18.50*
Content: 1 pcs
€19.00*
Content: 1 pcs
€24.50*
Content: 1 Piece
12 March 2025 12:24
Erfüllt voll und ganz meiner Erwartung.
Erfüllt voll und ganz meiner Erwartung.
23 November 2024 09:25
Bohrstange
Alles super gelaufen so wie immer. Ware ist auch in Ordnung und der Preis ist auch ok. Danke
25 January 2024 17:20
Bohrstange könnte etwas härter sein !
Bohrstange könnte etwas härter sein !
10 January 2024 05:59
Ausgezeichnet
Ausgezeichnet
4 December 2023 16:47
Wie bei allen bisherigen Lieferungen alles bestens!
Wie bei allen bisherigen Lieferungen alles bestens!
30 November 2022 09:11
Schnelle und perfekte Lieferung. Die Qualität ist
Schnelle und perfekte Lieferung. Die Qualität ist wie von Paulimot gewohnt top.Ich kaufe gerne wieder.
17 August 2022 09:35
Super wie immer gut Qualität
Super wie immer gut Qualität
11 May 2022 12:56
Kleine Bohrstange, aber funktioniert
Kleine Bohrstange, aber funktioniert
14 April 2022 17:19
Gute Qualität
Gute Qualität
24 March 2022 08:49
très bien
très bien