Quick-action drill chuck for clockwise and anti-clockwise rotation 1 - 16 mm MK3 / M12
€33.50*
Prices incl. 19% VAT. plus Shipping costs
Delivery time: 1-3 working days **
More than 10 pieces available (online and in specialist shops)
Intended use
Drill chucks are used to clamp tools with a cylindrical shank, such as drills, countersinks, reamers, etc. Drill chucks are used in machine tools such as lathes, milling machines or drilling machines. Depending on the type of machine, a drill chuck with a suitable holder is required. A general distinction is made between drill chucks in which the tools are clamped with a spanner and drill chucks in which the tools can be clamped without a spanner, so-called quick-action drill chucks.
Technical data
| Clamping range [mm]: | 1 - 16 |
|---|---|
| Concentricity deviation max. [mm]: | 0,1 |
| Cone mandrel: | MK3 / M12 / B18 |
| Inner cone: | B18 |
| Ø drill max. [mm]: | 16 |
Suitable for clockwise and anti-clockwise rotation thanks to locking mechanism
Fast, secure clamping and unclamping
No clamping spanner required
With tightening thread, suitable for use on milling machines
Taper arbor and drill chuck connected via cone
Description of the
This quick-action drill chuck has a locking mechanism that prevents the drill chuck from loosening in anti-clockwise rotation. As a result, unlike conventional quick-action drill chucks, this drill chuck is suitable for clockwise and anti-clockwise rotation. The chuck is locked and unlocked by turning the red ring to "LOCK" or "UNLOCK". The drill chuck is supplied with a tapered arbour. The taper arbor and drill chuck are connected to each other via a form-fit B18 cone, i.e. the taper arbor can be separated from the drill chuck. The taper arbor has a tightening thread in the Morse taper and is therefore suitable for use in milling machines. The clamping range of this chuck is 1 to 16 mm. As the three clamping jaws close completely, it is also possible to clamp tools with a shank diameter of less than 1 mm.
Note: Drill chucks are not suitable for milling work.
Scope of delivery
- 1 x quick-action drill chuck for clockwise and anti-clockwise rotation 1 - 16 mm MK3 / M12
More about the brand and products from
This quick-action drill chuck has a locking mechanism that prevents the drill chuck from loosening in anti-clockwise rotation. As a result, unlike conventional quick-action drill chucks, this drill chuck is suitable for clockwise and anti-clockwise rotation. The chuck is locked and unlocked by turning the red ring to "LOCK" or "UNLOCK". The drill chuck is supplied with a tapered arbour. The taper arbor and drill chuck are connected to each other via a form-fit B18 cone, i.e. the taper arbor can be separated from the drill chuck. The taper arbor has a tightening thread in the Morse taper and is therefore suitable for use in milling machines. The clamping range of this chuck is 1 to 16 mm. As the three clamping jaws close completely, it is also possible to clamp tools with a shank diameter of less than 1 mm.
Note: Drill chucks are not suitable for milling work.
With this precision quick-action drill chuck, the taper arbor and the drill bit holder consist of one part, i.e. the taper arbor cannot be separated from the drill chuck. In contrast to drill chucks with an inserted taper arbor, this design enables a higher concentricity to be achieved. The taper arbor has a tightening thread in the Morse taper and is therefore suitable for use in milling machines. The clamping range of this chuck is 1 to 13 mm. As the three clamping jaws close completely, it is also possible to clamp tools with a shank diameter of less than 1 mm.
With this precision quick-action drill chuck, the taper arbor and the drill bit holder consist of one part, i.e. the taper arbor cannot be separated from the drill chuck. In contrast to drill chucks with an inserted taper arbor, this design enables a higher concentricity to be achieved. The taper arbor has a tightening thread in the Morse taper and is therefore suitable for use in milling machines. The clamping range of this chuck is 1 to 16 mm. As the three clamping jaws close completely, it is also possible to clamp tools with a shank diameter of less than 1 mm.
This quick-release drill chuck is supplied with a tapered arbour. The taper arbor and drill chuck are connected to each other via a positive-locking B16 cone, i.e. the taper arbor can be separated from the drill chuck. The taper arbor has a tightening thread in the Morse taper and is therefore suitable for use in milling machines. The clamping range of this chuck is 1 to 13 mm. As the three clamping jaws close completely, it is also possible to clamp tools with a shank diameter of less than 1 mm.
Note: Drill chucks are not suitable for milling work.
This quick-action drill chuck is supplied including taper arbour. The taper arbor and drill chuck are connected to each other via a form-fit B18 cone, i.e. the taper arbor can be separated from the drill chuck. The taper arbor has a tightening thread in the Morse taper and is therefore suitable for use in milling machines. The clamping range of this chuck is 1 to 16 mm. As the three clamping jaws close completely, it is also possible to clamp tools with a shank diameter of less than 1 mm.
Note: Drill chucks are not suitable for milling work.
This quick-release drill chuck has a locking mechanism that prevents the drill chuck from loosening during anti-clockwise rotation. As a result, unlike conventional quick-release drill chucks, this drill chuck is suitable for clockwise and anti-clockwise rotation. The chuck is locked and unlocked by turning the red ring to "LOCK" or "UNLOCK". The drill chuck is supplied with a tapered arbour. The taper arbor and drill chuck are connected to each other via a form-fit B16 cone, i.e. the taper arbor can be separated from the drill chuck. The taper arbor has a tightening thread in the Morse taper and is therefore suitable for use in milling machines. The clamping range of this chuck is 1 to 13 mm. As the three clamping jaws close completely, it is also possible to clamp tools with a shank diameter of less than 1 mm.
Note: Drill chucks are not suitable for milling work.
€33.50*
Content: 1 pcs
€52.50*
Content: 1 pcs
€60.00*
Content: 1 pcs
€25.00*
Content: 1 pcs
€27.50*
Content: 1 pcs
€29.50*
Content: 1 pcs
18 January 2023 10:28
Einfach sehr gut
Einfach sehr gut
15 November 2022 11:15
Preis Leistung ist sehr gut gute Verarbeitung!
Preis Leistung ist sehr gut gute Verarbeitung!
30 August 2022 09:19
Alles bestens - gerne wieder!
Alles bestens - gerne wieder!
19 May 2022 14:49
Rubdlauffehler im besten Fall 0,1mm erreicht, durchschnittlich
Rubdlauffehler im besten Fall 0,1mm erreicht, durchschnittlich eher 0,2 - 0,3mm. Für einfache Bohrarbeiten sicherlich ausreichend und preislich ja auch im Rahmen.
15 August 2021 00:00
Bohrfutter
Tut wofür er vorgesehen wurde, Keine Beanstandungen
6 June 2021 00:00
Alles gut, gerne wieder.
Artikel entspricht Profiqualität. Preis i.O.