Cutter head 63 mm with 5 inserts (TiAlN-coated)
€85.00*
Prices incl. 19% VAT. plus Shipping costs
Delivery time: 1-3 working days **
More than 10 pieces available (online and in specialist shops)
Intended use
Cutterheads are mainly used for face milling surfaces, as fewer milling passes are required due to the larger milling diameter compared to end mills. It is also possible to mill offsets on surfaces. The main advantages of milling heads compared to HSS end mills, for example, are the standardised indexable inserts, with which very high cutting performance can be achieved. Depending on the material to be machined, inserts with different coatings can be used. Cutter heads are used together with a milling arbour.
Technical data
| Number of cutting edges: | 5 |
|---|---|
| Number of cutting edges: | 5 |
| Standard designation Cutting insert: | RPMT1204 |
| Surface coating of cutting insert: | TiAlN |
| Total height [mm]: | 40 |
| Ø cutter head [mm]: | 63 |
| Ø milling arbour holder [mm]: | 22 |
Cutter head surface-tempered by nickel plating
Five inserts for smooth running and higher cutting performance
Cutting inserts TiAlN-coated
For face and shoulder milling
Incl. screw for connection to a milling arbor
Description of the
The cutter head is suitable for face or shoulder milling (radius 6 mm) of surfaces. The diameter of the cutter is 63 mm. The cutter head is nickel-coated. This nickel coating offers excellent corrosion protection. Nickel is resistant to air, water, diluted acids, lubricants and most alkalis. Another feature of the nickel surfaces is the visual enhancement of the cutterhead, which is fitted with five TiAlN-coated indexable inserts. The advantages and properties of the titanium-aluminium-nitride coating (TiAlN coating):Titanium-aluminium-nitride (TiAlN) is a compound of the elements titanium, aluminium and nitrogen. A key feature of this coating is its high resistance to heat hardening and oxidation. This coating is intended for use in the machining of hard and tough materials and therefore for high machining temperatures. The TiAlN coating allows hardened, alloyed steels and cast iron to be machined. One advantage of cutterheads with round inserts (if they are only used for face milling) is that the inserts can be used around the entire circumference. This means that if the round cutting insert is worn at one point, it is only turned a little further. In contrast, a square insert can only be turned once or twice.
Scope of delivery
- 1 x cutter head 63 mm with 5 cutting plates
- 1 x M10 x 30 screw for connection to a milling arbour
More about the brand and products from
The cutter head is suitable for face or shoulder milling (radius 6 mm) of surfaces. The diameter of the cutter is 63 mm. The cutter head is nickel-coated. This nickel coating offers excellent corrosion protection. Nickel is resistant to air, water, diluted acids, lubricants and most alkalis. Another feature of the nickel surfaces is the visual enhancement of the cutterhead, which is fitted with five TiAlN-coated indexable inserts. The advantages and properties of the titanium-aluminium-nitride coating (TiAlN coating):Titanium-aluminium-nitride (TiAlN) is a compound of the elements titanium, aluminium and nitrogen. A key feature of this coating is its high resistance to heat hardening and oxidation. This coating is intended for use in the machining of hard and tough materials and therefore for high machining temperatures. The TiAlN coating allows hardened, alloyed steels and cast iron to be machined. One advantage of cutterheads with round inserts (if they are only used for face milling) is that the inserts can be used around the entire circumference. This means that if the round cutting insert is worn at one point, it is only turned a little further. In contrast, a square insert can only be turned once or twice.
The cutter head is suitable for face or shoulder milling of surfaces. The diameter of the cutter is 40 mm. The cutter head is nickel-coated. This nickel coating provides excellent corrosion protection. Nickel is resistant to air, water, diluted acids, lubricants and most alkalis. Another feature of the nickel surfaces is the visual enhancement of the cutterhead, which is fitted with three TiAlN-coated indexable inserts. The advantages and properties of the titanium-aluminium-nitride coating (TiAlN coating):Titanium-aluminium-nitride (TiAlN) is a compound of the elements titanium, aluminium and nitrogen. A key feature of this coating is its high resistance to heat hardening and oxidation. This coating is intended for use in the machining of hard and tough materials and therefore for high machining temperatures. The TiAlN coating can be used to machine hardened, alloyed steels and cast iron.
The cutter head is suitable for face or shoulder milling of surfaces. The diameter of the cutter is 50 mm. The cutter head is nickel-coated. This nickel coating offers excellent corrosion protection. Nickel is resistant to air, water, diluted acids, lubricants and most alkalis. Another feature of the nickel surfaces is the visual enhancement of the cutterhead, which is fitted with four TiAlN-coated indexable inserts. The advantages and properties of the titanium-aluminium-nitride coating (TiAlN coating):Titanium-aluminium-nitride (TiAlN) is a compound of the elements titanium, aluminium and nitrogen. A key feature of this coating is its high resistance to heat hardening and oxidation. This coating is intended for use in the machining of hard and tough materials and therefore for high machining temperatures. The TiAlN coating can be used to machine hardened, alloyed steels and cast iron.
The cutter head is suitable for face or shoulder milling (radius 6 mm) of surfaces. The diameter of the cutter is 50 mm. The cutter head is nickel-coated. This nickel coating offers excellent corrosion protection. Nickel is resistant to air, water, diluted acids, lubricants and most alkalis. Another feature of the nickel surfaces is the visual enhancement of the cutterhead, which is fitted with five TiAlN-coated indexable inserts. The advantages and properties of the titanium-aluminium-nitride coating (TiAlN coating):Titanium-aluminium-nitride (TiAlN) is a compound of the elements titanium, aluminium and nitrogen. A key feature of this coating is its high resistance to heat hardening and oxidation. This coating is intended for use in the machining of hard and tough materials and therefore for high machining temperatures. The TiAlN coating allows hardened, alloyed steels and cast iron to be machined. One advantage of cutterheads with round inserts (if they are only used for face milling) is that the inserts can be used around the entire circumference. This means that if the round cutting insert is worn at one point, it is only turned a little further. In contrast, a square insert can only be turned once or twice.
The cutter head is suitable for face or shoulder milling of surfaces. The diameter of the cutter is 63 mm. The cutter head is nickel-coated. This nickel coating provides excellent corrosion protection. Nickel is resistant to air, water, diluted acids, lubricants and most alkalis. Another feature of the nickel surfaces is the visual enhancement of the cutterhead, which is fitted with five TiAlN-coated indexable inserts. The advantages and properties of the titanium-aluminium-nitride coating (TiAlN coating):Titanium-aluminium-nitride (TiAlN) is a compound of the elements titanium, aluminium and nitrogen. A key feature of this coating is its high resistance to heat hardening and oxidation. This coating is intended for use in the machining of hard and tough materials and therefore for high machining temperatures. The TiAlN coating can be used to machine hardened, alloyed steels and cast iron.
The cutter head is suitable for face and shoulder milling of surfaces. The diameter of the cutter is 80 mm. The cutter head is nickel-coated. This nickel coating offers excellent corrosion protection. Nickel is resistant to air, water, diluted acids, lubricants and most alkalis. Another feature of the nickel surfaces is the visual enhancement of the cutterhead, which is fitted with five TiAlN-coated indexable inserts. The advantages and properties of the titanium-aluminium-nitride coating (TiAlN coating):Titanium-aluminium-nitride (TiAlN) is a compound of the elements titanium, aluminium and nitrogen. A key feature of this coating is its high resistance to heat hardening and oxidation. This coating is intended for use in the machining of hard and tough materials and therefore for high machining temperatures. The TiAlN coating can be used to machine hardened, alloyed steels and cast iron.
The cutter head is suitable for face or shoulder milling (radius 6 mm) of surfaces. The diameter of the cutter is 80 mm. The cutter head is nickel-coated. This nickel coating offers excellent corrosion protection. Nickel is resistant to air, water, diluted acids, lubricants and most alkalis. Another feature of the nickel surfaces is the visual enhancement of the cutterhead, which is fitted with six TiAlN-coated indexable inserts. The advantages and properties of the titanium-aluminium-nitride coating (TiAlN coating):Titanium-aluminium-nitride (TiAlN) is a compound of the elements titanium, aluminium and nitrogen. A key feature of this coating is its high resistance to heat hardening and oxidation. This coating is intended for use in the machining of hard and tough materials and therefore for high machining temperatures. The TiAlN coating allows hardened, alloyed steels and cast iron to be machined. One advantage of cutterheads with round inserts (if they are only used for face milling) is that the inserts can be used around the entire circumference. This means that if the round cutting insert is worn at one point, it is only turned a little further. In contrast, a square insert can only be turned once or twice.
Milling head / cutter head Ø approx. 25 mm with 2 cutting inserts
tool holder MK2 / M10
incl. 2 indexable inserts
The matching indexable insert can be found under item number 13430.
Milling head / cutter head Ø approx. 30 mm with 2 cutting inserts
Tool holder MK3 / M12
incl. 2 indexable inserts
The matching indexable insert can be found under item number 13431.
This milling head / cutter head with MK3 shank is suitable for face and shoulder milling. It is not suitable for plunging into a workpiece. Thanks to its MK3 shank, this milling cutter can be inserted directly into the tool holder; no additional milling arbour is required.
This mini fly cutter set consists of three fly cutters with different head diameters including matching HSS inserts. The impact cutters are made of burnished steel. The cylindrical clamping shanks make them suitable for use in drilling / boring heads. The rake and flank faces of the HSS inserts are already pre-ground. To achieve optimum results, the chip grooves must be ground before use. The HSS inserts have a clamping surface for a better hold in the impact milling cutter.
This set is supplied with a wooden storage cube.
€85.00*
Content: 1 pcs
€59.00*
Content: 1 pcs
€67.00*
Content: 1 pcs
€78.00*
Content: 1 pcs
€78.00*
Content: 1 pcs
€88.00*
Content: 1 pcs
€95.00*
Content: 1 pcs
€35.00*
Content: 1 pcs
€35.00*
Content: 1 pcs
€52.00*
Content: 1 pcs
€29.00*
Content: 1 pcs
9 September 2024 17:17
Bisher hatte ich nur einen kleinen Einsatz
Bisher hatte ich nur einen kleinen Einsatz mit ganz wenig Spantiefe. Über die endgültige Qualität kann ich also nichts konkretes sagen. Der erste Eindruck und der Paulimot-Service war aber wie immer sehr gut.
31 January 2023 10:54
Messerkopf 63 mm
OPTISCH EIN SEHR GUT AUSSEHENDER flächenfräser . was sehr gut ist , das er aufgestellt auf einer glatten fläche , keinen zehntel mm wackelt . das wäre nämlich kein gutes zeichen . ausprobiert habe ich ihn noch nicht , aber , ich hege keine gedanken dran , eine schlechten fräser gekauft zu haben .
7 January 2023 18:31
Gut für nicht zu Harte Materialien.
Soweit zufrieden, jedoch werden bei Materialien, welche schwerer zu zerspanen sind als S235 die schneiden recht schnell Stumpf. Deshalb ein Punkt Abzug. Die Oberfläche beim Planen von Alu ist jedoch hervorragend.
1 February 2022 00:00
Ware und Lieferung einwandfrei
Messerkopf ist einwandfrei
10 May 2021 00:00
Test kommt noch
Sieht gut aus, der Test steht aber noch bevor. Ich schätze aber die raschen Lieferungen sehr.
30 January 2021 00:00
Brauchbar
Für den Preis OK
22 June 2020 00:00
leider nicht 100%
Leider stimmen die Schneidplatten nicht genau überein, dadurch schneiden bei geringer Abnahme nicht alle Platten.
6 April 2020 00:00
Super Schnelle Lieferung
Sehr schnelle Lieferung, super Preis Leistungsverhältnis. Für den Heimwerker Bereich ausreichend Präzise.
25 December 2019 00:00
Fräskopf 63 mm
Werkzeug ist prima. Schon mehrfach benutzt. Alles prima
19 December 2019 00:00
Fräskopf 63 mm
Werkzeug ist prima. Schon mehrfach benutzt. Alles prima