HM carbide indexable insert DCMT070204-TiAlN
€5.00*
Prices incl. 19% VAT. plus Shipping costs
Delivery time: 1-3 working days **
More than 10 pieces available (online and in specialist shops)
Intended use
Indexable inserts are used in machining and are mounted on the turning tools or milling cutters intended for this purpose. Depending on the intended use or the material to be machined, inserts are available in various shapes and with special coatings. For example, there are special inserts for machining aluminium or non-ferrous metals. The inserts are standardised and can be identified by the respective standard designation. If a cutting insert is worn, it is simply replaced with a new insert.
Technical data
| Areas of application: | Chamfering, Facing, Internal boring, Longitudinal turning |
|---|---|
| Areas of application: | Facing |
| Areas of application: | Internal boring, Longitudinal turning |
| Areas of application: | Longitudinal turning |
| Clearance angle [°]: | 7 |
| Cutting edge radius [mm]: | 0,4 |
| Point angle [°]: | 55 |
| Standard designation: | DCMT070204 |
| Surface: | TiAlN |
Carbide insert with titanium-aluminium-nitrogen coating (TiAlN)
For cutting hard materials such as steel, stainless steel and titanium alloys
High hot hardness and oxidation resistance
For higher cutting speeds
Cooling not absolutely necessary
Description of the
The advantages and properties of the titanium-aluminium-nitrogen coating (TiAlN coating):
The TiAlN coating is an all-round coating that is suitable for universal use. It allows the machining of hard materials such as steel, stainless steel or titanium alloys. Another advantage of this insert is that the use of cooling lubricant is not absolutely necessary. However, the use of coolant generally increases the service life of the insert.
Scope of delivery
- 1 x carbide indexable insert DCMT070204-TiAlN
More about the brand and products from
The advantages and properties of the titanium-aluminium-nitrogen coating (TiAlN coating):
The TiAlN coating is an all-round coating that is suitable for universal use. It allows the machining of hard materials such as steel, stainless steel or titanium alloys. Another advantage of this insert is that the use of cooling lubricant is not absolutely necessary. However, the use of coolant generally increases the service life of the insert.
The advantages and properties of this polished insert:
The highly positive geometry in combination with the sharply ground cutting edges and the sintered chip breakers enable excellent machining of aluminium and non-ferrous metals such as brass, copper, bronze, etc.
Thanks to these geometric properties, particularly good surface results can be achieved. The highly positive geometry reduces the formation of a so-called built-up edge when machining aluminium. Very good results can also be achieved when machining both cast iron and plastics.
This cutting insert is made of sintered carbide. In contrast to HSS tools, the high temperature resistance of carbide allows higher cutting speeds. In addition, this insert is titanium nitride-coated, which contributes to greater heat resistance and tool life. TiN-coated inserts are intended for universal use. This means that soft materials can be machined in the same way as hard materials.
The advantages and properties of the titanium-aluminium-nitrogen coating (TiAlN coating):
The TiAlN coating is an all-round coating that is suitable for universal use. It allows the machining of hard materials such as steel, stainless steel or titanium alloys. Another advantage of this insert is that the use of cooling lubricant is not absolutely necessary. However, the use of coolant generally increases the service life of the insert.
The advantages and properties of this polished insert:
The highly positive geometry in combination with the sharply ground cutting edges and the sintered chip breakers enable excellent machining of aluminium and non-ferrous metals such as brass, copper, bronze, etc.
Thanks to these geometric properties, particularly good surface results can be achieved. The highly positive geometry reduces the formation of a so-called built-up edge when machining aluminium. Very good results can also be achieved when machining both cast iron and plastics.
This cutting insert is made of sintered carbide. In contrast to HSS tools, the high temperature resistance of carbide allows higher cutting speeds. In addition, this insert is titanium nitride-coated, which contributes to greater heat resistance and tool life. TiN-coated inserts are intended for universal use. This means that soft materials can be machined in the same way as hard materials.
€5.00*
Content: 1 pcs
€45.00*
Content: 1 pcs
€40.50*
Content: 1 pcs
€45.00*
Content: 1 pcs
€5.00*
Content: 1 pcs
€4.50*
Content: 1 pcs
12 September 2024 10:26
Empfehlenswert
Geht sehr gut bei Guss
8 May 2024 10:43
Kann man sehr sauber und gut mit
Kann man sehr sauber und gut mit arbeiten.
8 August 2023 19:28
Die Lieferung war zügig und schnell. Verpackung sehr
Die Lieferung war zügig und schnell. Verpackung sehr praktisch. Über die Teile kann ich noch nix sagen da ich sie noch nicht angewendet habe. Würde sie aber wieder bestellen
23 June 2023 18:09
es ist schwierig, für einen vorhandenen Halter
es ist schwierig, für einen vorhandenen Halter die richtigen Schneidplatten im Netz zu finden, mit diesen ist es mir aber gelungen.
23 April 2023 16:24
Gute Bearbeitung von V2A
Setze die Schneidplatten zur Bearbeitung von V2A auf einer Mechanikerdrehbank ein. Bin sehr zufrieden damit. Die Standzeit ist gut.
17 March 2023 08:53
Standzeit könnte etwas länger sein, aber ansonsten
Standzeit könnte etwas länger sein, aber ansonsten sehr gut
29 December 2022 09:05
Wechselschneidplatten für Hartmetall
die Teile haben wie vorgesehen, gut funktioniert. Die Telefonberatung vorab war gut.
27 December 2022 11:31
Wendeschneidplatten
Gute wendeschneidplatten würde ich wieder kaufen.
29 November 2022 10:25
Wie immer schnell und sehr gute Qualität
Wie immer schnell und sehr gute Qualität
12 November 2022 06:26
Schnitt-Daten
Ich muss sagen dass diese Wendeplatten echt gut funktionieren. Allerdings würde ich mir wünschen, dass in der Beschreibung noch 2 weitere Werte auf gelistet werden. Und zwar einmal die Schnittgeschwindigkeit mit der man arbeiten kann/sollte und zweitens die Vorschübe die man mit den Platten fahren kann/sollte. Bei anderen Herstellen werden genau diese zwei Werte immer mit angegeben. Ansonsten gutes Werkzeug.